Professional Documents
Culture Documents
ALIMAK SE H SE H Ex Modular Range ASME 17.1 1686 EN Oct 2020
ALIMAK SE H SE H Ex Modular Range ASME 17.1 1686 EN Oct 2020
ALIMAK SE H SE H Ex Modular Range ASME 17.1 1686 EN Oct 2020
1.1
CAPACITY
DIMENSIONS
Internal width: 5' 1⅜" – 5' 11¾"
Internal length: 8' 6¼" – 12' 9½"
Internal height: 8' 4½"
Vertical door opening width: 5' 0¼" – 5' 10½"
Door opening height: 7' 8½"
Headroom required above landing: 16' 4¾" / 17' 8½''1
Min. required shaft dimension = –
Landing enclosure outside dimension
Mast section length: 4' 11⅜"
1. 16’ 5’’ = vertical bi-parting car door. 18’ 8½" = vertical full height car door.
CAR WEIGHT
6500 – 7100 lb
CONTROLS
Operation:
• Collective / Selective. 2 – 16 Fig B1
landings
Fig B2
Car door configuration
www.alimak.com
9999 EN
Pictures are illustrative only and do not necessarily show the configuration of products on the market at a given point in time. Products must be used in conformity with safe
practice and applicable statutes, regulations, codes and ordinances. Specifications of products and equipment shown herein are subject to change without notice.
Copyright © 2018 Alimak Group AB. All rights reserved. Alimak and Scando are registered trademarks of Alimak Group AB.
ALIMAK SE Lifts
B5
fpm ASME lb
SE 1900 5' 1½" × 8' 6 ¼" 105 26 4190 5' 0¼"
SE 2200 5' 1½" × 9' 4½" 105 30 4850 5' 0¼"
SE 2500 5' 1½" × 10' 2¾" 105 34 5510 5' 0¼"
SE 2700 5' 1½" × 11' 1" 105 37 5950 5' 0¼"
SE 3000 5' 1½" × 11' 11¼" 105 41 6610 5' 0¼"
SE 3300 5' 1½" × 12' 9½" 105 45 7270 5' 0¼"
Table 4 Weights
Lift type Car size Car weight excl. machinery1 Car weight incl. machinery2
w×l
lb lb
1. Stated weight for 5' 1½" wide lift car including 2 pcs full height doors (440 lb) each.
Stated weight for 5' 11 ¾" wide lift car including 2 pcs full height doors (530 lb) each.
Reduce stated weight with one (×1) or two (×2) times 100 lb where bi-parting door(s)
occur.
2. Car made of stainless steel in brackets ().
SE 2400 5' 11 ¾" × 8' 6 ¼" 16' 5" / 18' 8½" 9' 11" × 9' 4½" 10' 0½" × 9' 9" / 10' 5¼"
Review 09 2018-12-19 7508 en-US
SE 2700 5' 11 ¾" × 9' 4½" 16' 5" / 18' 8½" 9' 11" × 10' 2¾" 10' 0½" × 10' 7¼" / 11' 3¾"
SE 3000 5' 11 ¾" × 10' 2¾" 16' 5" / 18' 8½" 9' 11" × 11' 1" 10' 0½" × 11' 5 ½" / 12' 2"
fpm ASME lb
Car and car doors of extruded aluminium panels
SE−Ex 2200 5' 1½" × 9' 4½" 127 30 4850 5' ¼"
SE−Ex 2500 5' 1½" × 10' 2¾" 127 34 5510 5' ¼"
SE−Ex 2400 5' 11¾" × 8' 6¼" 127 33 5290 5' 10½"
Car and car doors of stainless steel
SE−Ex 2000 5' 1½" × 8' 6¼" 127 26 4630 5' ¼"
Table 8 Weights
Lift type Car size Car weight incl. machinery1 Car weight excl. machinery
w×l
lb lb
1. Stated weight for 5' 1½" wide lift car including 2 pcs full height doors (440 lb) each.
Stated weight for 5' 11 ¾" wide lift car including 2 pcs full height doors (530 lb) each.
Reduce stated weight with one (×1) or two (×2) times 100 lb where bi-parting door(s)
occur.
Review 09 2018-12-19 7508 en-US
ALIMAK SE Lifts
B9
SE−Ex 2200 5' 1½" × 9' 4½" 16' 5" / 18' 8½" 9' 0¾" × 10' 4" 9' 2¼" × 10' 7¼" / 11' 3¾"
SE−Ex 2500 5' 1½" × 10' 2¾" 16' 5" / 18' 8½" 9' 0¾" × 11' 2¼" 9' 2¼" × 11' 5½" / 12' 2"
SE−Ex 2400 5' 11¾" × 8' 6¼" 16' 5" / 18' 8½" 9' 11" × 9' 4½" 10' 0½" × 9' 9" / 10' 5¼"
Car and car doors of stainless steel
SE−Ex 2000 5' 1½" × 8' 6¼" 16' 5" / 18' 8½" 9' 0¾" × 9' 5¾" 9' 2¼" × 9' 9" / 10' 5¼"
A50 243 lb up to 80 ft
Electrical data
POWER SUPPLY
ELECTRICAL MOTOR
ELECTRICAL BRAKE
Surface treatment
Structural parts (mast, car frame):
• Hot dip galvanized
Car and enclosure panels:
• Anodized aluminium
• Stainless steel (for extreme environment)
Other parts:
• Hot dip galvanized
• Stainless steel