Professional Documents
Culture Documents
Chemical Non-Sparking Hand Tools
Chemical Non-Sparking Hand Tools
Pahwa MetalTech
MSME
Copper Titanium
Pahwa MetalTech is registered SME Manufacturer Non – Sparking Hand Safety Tools for an
and qualify under Class-I local supplier with 100%
indigenous content as per MSME PPP.
ATMANIRBHAR BHARAT
Start Up India
Pahwa MetalTech is registered under the “Start Up
India” Initiative, recognized by Department of
Industry and Promotion, DPIIT, Government of India
DPP 2016
As per DPP (Defence Procurement Procedure), we
qualify for Buy (Indian-IDDM) – 100% Indigenous
▪ Non-sparking Safety Tools are tools made from special alloys of Copper and are
recommended for use where hazardous, flammable or combustible vapours,
liquids, dusts or residues are present.
▪ There are many standards and recommendations that have been published by OSHA
(Occupational Health and Safety Administration) and NFPA (National Fire
Protection Association) that advise the use of non-sparking tools in hazardous
environments.
Non-Sparking Hand tools are mandatory to be used while working in areas with solids, liquids, and gases
classified under flammable and explosive materials. Conventional Steel Tools can generate a spark and cause an
explosion and fire. Non-Sparking Hand Tools also sometimes referred to as anti-Spark, Safety Tools or Sparkless
Tools must be used for Safety.
Beryllium Free
Copper Titanium tools are made from high-quality
Copper & Titanium and is 100% free from Beryllium
Non-Sparking
Copper Titanium Non-Sparking Hand Tools are
tested and certified for Non-Sparking
Characteristics as per BIS Standards IS:4595 -1969
Torque Tested
Copper Titanium Non-Sparking Hand Tools are
torque tested to standards applicable to Steel Hand
Tools.
Pin to Pull Cap Seal BW - 2014 Drum Opener(with Pin) - 100 x 300 mm 100 300
Copper Titanium Non- Sparking Drum Cutters is used to cut the 205
liter/55 gallons drum containing flammable liquids.
With our years of experience working with Chemical and Pharmaceutical users of Non-Sparking Hand Tools, we have
created Three special types of Tool Kits with tools most used by Chemical and Pharmaceutical companies.
QTi BUDGET KIT QTi STANDARD KIT QTi STANDARD+ KIT Get FREE
Basic Kit to get you started for most of Standard Kit with more sizes of open Standard+ Kit is a comprehensive kit for Tool Box &
your maintenance activities and ring spanners and Allen keys working on complex process equipment's. a Hand Tool
Guide with
QTi Double Ended Open Spanner Everything in QTi Budget Kit Everything in QTi Budget Kit & QTi all kits
18 x 19 mm | 21 x 23 mm | Standard Kit
QTi Double End Open Spanner
24 x27 mm | 30 x 32 mm
12 x 13 mm | 14 x 15 mm | QTi Bung Wrench - 70 x 300 mm
QTi Double Ended Ring Spanner
20 x 22 mm | 25 x 28 mm | QTi Double Ended Open Spanner -
18 x 19 mm | 21 x 23 mm |
QTi Double Ended Ring Spanner 1/2 BS X 5/8 BS and 5/8 BS x 3/4 BS
24 x27 mm | 30 x 32 mm
12 x 13 mm | 14 x 15 mm | QTi Double Ended Ring Spanner
QTi Combination Pliers - 200 mm
20 x 22 mm | 25 x 28 mm | 1/2 BS X 5/8 BS and 5/8 BS x 3/4 BS
QTi Flat Screwdriver - 200 mm
QTi Round Chisel - 18 x 200 mm
QTi Philips Screwdriver - 200 mm
QTi Allen Key - 5 mm
QTi Ball Pein Hammer - 230 Gms
QTi Allen Key - 8 mm
QTi Drum Opener - 300 mm
QTi Allen Key - 10 mm
QTi Flat Scraper - 20 x 200 mm
Over 2500+ sizes and types of Non-Sparking Need a Special Non-Sparking Tool,
Hand Tools available Customized as per your requirement?
DOWNLOAD CONTACT US
Address: Plot No. A-25, Phase-1,M.I D.C. Tal : Khed,Chakan, Pune -410501
Phone: +91 84594 82252 Fax: +91 22 6645 9590
Email: info@pahwmetaltech.co.in Website: www.pahwmetaltech.co.in
facebook/pahwametaltech Twitter/pahwametaltech
LinkedIn/pahwametaltech YouTube/pahwametaltech