Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

IN THE BOX Table 2: Figure 2 Figure 3 Figure 4 Figure 5 Figure 6

USB-C charging cable Lock/Unlock ON/OFF Moonlight Turbo Strobe

USER Charge Type USB-C

MANUAL
Cable length 0.8m

Input 5V/2A

Output CC&CV 4.2V±0.05V 1A

Time to fully charge About 1 hour

ZoomBrite USB Type-C

Figure 1
Table 1: Charge
Flashlight
COOL WHITE CCT: 6000K CRI:70 GREEN
Charging Completed
1000 4min
TURBO lumens 100% 40%
110min RED
400
HIGH lumens 100% 105min 25% Charging
5min
100
MED lumens 100% 7h55min

15
LOW lumens 100% 42h

1 8 days
MOON lumen 100%

Press and hold Press Press and hold Double press Triple press
3,800cd 120m IPX6

1m 99g/3.49oz Working temperature:


0-40°C >1 sec 1 to 2 sec

Or
ZoomBrite (L)105*(W)34*(H)15mm
(L)4.13*(W)1.34*(H)0.59in
Lithium Polymer Battery
1350mAh 3.7V (4.995Wh)
>2 sec
OFF ON Moonlight Turbo Strobe

Adjustable focus EDC flashlight with * Above data are tested per ANSI/NEMA FL 1-2009 standard
in Olight's labs for reference.
red and white light

Figure 7 Figure 8 Figure 9 Figure 10-1 HOW TO OPERATE


1. Product specification, see Table 1 and Table 2;
Push the switch up to make the beam
smaller, and push down to make it bigger.
NOTICE
•Do not use the product while charging.
WARRANTY
Change Brightness Level Red Light Mode Adjust the Size of Light Beam Battery Level Indicator Display 2. Charge, see Figure 1; 4. Power indicator: Within 30 days of purchase: Contact the
•Do not put a hot light into any type of fabric bag original seller for repair or replacement.
3. Operating instructions as below: 4.1 Non-moonlight mode, see Figure10-1; or fusible plastic container.
3.1 Lock/Unlock, see Figure 2; 4.2 Moonlight mode, see Figure10-2; •To prevent high surface temperatures, do not Within 2 years of purchase: Contact Olight
Green Orange Red Blink Red
(>60%) (60%-10%) (<10%) (<5%) activate the maximum brightness mode multiple for repair or replacement.
While turned off, press and hold the button (for
about 2 seconds) until moonlight mode turns times continuously.
This warranty does not cover normal wear and
off, the product is then locked out. While •When the product gets hot, please change it to tear, modifications, misuse, disintegrations,
locked, if the button is pressed for a short time low brightness, or turn it off temporarily. negligence, accidents, improper maintenance,
(less than 1 second), the red indicator light will or repair by anyone other than an Authorized
•Active thermal management: The built-in
be on for 2 seconds. Press and hold the button
thermistor monitors the temperature of the light retailer or Olight itself.
for more than 1 second, moonlight mode will be
in real time and suppresses overheating by
turned on and the product is unlocked.
reducing the output.
3.2 Turn on/off, see Figure 3;
•Keep the charging port clean and dry.
3.3 Moonlight mode, see Figure 4; USA Customer Support
•Do not disassemble the product.
Press and hold the button for more than 1
•When not charging, please cover the tail cover to cs@olightstore.com
second while the light is off, moonlight mode will
be turned on. If previous mode before turning off keep the charging port clean. Global Customer Support
was moonlight mode, just press the button. •Operating time in Turbo or high mode varies with
contact@olightworld.com
3.4 Turbo mode, see Figure 5; ambient temperature and heat dissipation
conditions. The better the heat dissipation, the Visit www.olightworld.com to see
Quickly double-press the button in white light
longer the runtime. our complete product line of portable
Figure 10-2 mode to enter turbo mode, double-press again
to return to the previous mode. •Fully charge the battery before extended storage illumination tools.
Battery Level Indicator 3.5 Strobe mode, see Figure 6;
times.

(Moonlight mode) Quickly press the button three times or more


to enter strobe mode, single press or long
OFF: >5% Blink Red: <5% press to return. EXCLUSION CLAUSE
WARNING
3.6 Change brightness, see Figure 7; Olight is not liable for damages or injuries
•Do not store, charge or use the product in the sustained resulting from the usage of the
In the white light mode, long press the button Dongguan Olight E-Commerce Technology Co., Ltd.
car or similar places where the temperature may product inconsistent with the warnings in
to change the brightness. The output starts
exceed 60℃. the manual, including but not limited to 4th Floor, Building 4, Kegu Industrial Park, No 6
Press and hold Double press Push from the current brightness, and changes in
•To avoid temporary blindness or permanent using the product inconsistent with the Zhongnan Road, Changan Town, Dongguan City,
the order of moonlight (or
damage to the eyes, do not look directly at the recommended lockout mode. Guangdong, China.
Turbo)->Low->Medium->High->Low.
Release the button to select the brightness. light source or shine into eyes. Made in China
Moonlight Turbo
3.7 Red light mode, see Figure 8; •Do not obstruct the lens, or else the energy
emitted from the light may cause the object to
Low While the light is off, double-press to enter red
burn.
light mode, double-press again to enter SOS
Moonlight mode. Single-press to turn off, and the white •Do not remove the dedicated battery for
High Medium light (low-light) mode will be memorized when charging.
RED Light SOS (RED) Spotlight Floodlight CAN ICES-005 (B) / NMB-005 (B)
the light is turned on again.
3.8 Adjust the size of light beam, see Figure 9; 3.4000.0576 A. 18, 05, 2023

You might also like