Professional Documents
Culture Documents
Sunpal Solar Charge Controller Catalogue
Sunpal Solar Charge Controller Catalogue
SOLAR CHARGE
CONTROLLER
CATALOG
SUNPAL POWER
CO., LTD SOLAR CONTROLLER
0086-551-65865992
info@sunpalpower.com
www.sunpalpower.com www.sunpalpower.com
SUNPAL POWER CO., LTD SOLAR CONTROLLER
Parameters
Parameter Value
Model ML4860
800W/12V
1600W/24V
Max. photovoltaic system input power
2400W/36V
3200W/48V
compaensation interface
Temperature compensation factor -3mv/°C/2V (default)
Rs485 communicatio
Batter y voltage
Operating temperature -35℃ ~ +45℃
Temperature
interface
sensor
Waterproof level IP32
ML Series 4
3
7
8
2 1
9
5
6
Weight
Communication method
3.6kg
RS232 / RS485
Solar Charge and Discharge Controller Altitude ≤ 3000m
ML4860
1 years
Comparison Table of Parameters for Each Type of Battery
Setting Voltage Sealed Lead-Acid Gel Lead-Acid Flooded Lead-Acid
Auto
INPUT
LCD DISPLAY
IP32 Battery Type Battery Battery Battery User (User-Defined)
12V/24V 150V Max.
Overvoltage
Disconnect Voltage 16.0V 16.0V 16.0V 9 ~ 17V
Parameters
Parameter Name Parameter Value
Model ML4830
400W/12V
800W/24V
PV System Max Input Power
1200W/36V
1600W/48V
Temperature
Working Temperature -35℃ ~ +45℃
sensor
ML Series 7
Protection Level IP32
5
4
3 6 Weight 2.3Kg
2 1
Altitude ≤ 3000m
5 years
Overvoltage
Disconnect Voltage 16.0V 16.0V 16.0V 9 ~ 17V
Main Features Equalizing Voltage 14.6V —— 14.8V 9 ~ 17V
• Advanced double-peak or multiple-peak tracking technology. When the panel has a shadow block or a part of the panel is damaged, I-
Boost Voltage 14.4V 14.2V 14.6V 9 ~ 17V
V curve shows multiple peaks. The solar charge controller can still accurately track the maximum power point.
• Built-in algorithm for maximum power tracking. This significantly raises energy utilization efficiency of photovoltaic systems, with charging Floating Voltage 13.8V 13.8V 13.8V 9 ~ 17V
efficiency 15% ~ 20% higher than traditional PWM solar charge controllers.
Boost Restoring
• Combination of multiple tracking algorithms that can track the optimum working point of I-V curve accurately in a very short period of Voltage 13.2V 13.2V 13.2V 9 ~ 17V
time. Low Voltage Disconnect
• MPPT tracking efficiency can be as high as 99.9%. Restoring Voltage 12.6V 12.6V 12.6V 9 ~ 17V
• Advanced digital power technology, with circuit energy conversion efficiency as high as 98%. Under-Voltage Alarming
12.2V 12.2V 12.2V 9 ~ 17V
Restoring Voltage
• Supporting charging procedures of gel batteries, sealed batteries, open batteries, lithium batteries and other types of batteries.①
Under-Voltage
• Current-limiting charging mode. When the power of a solar panel is too large, and the charging current is greater than rated current, the Alarming Voltage 12.0V 12.0V 12.0V 9 ~ 17V
solar charge controller automatically reduces charging power, thereby making the solar panel work at rated charging current. Low Voltage
11.1V 11.1V 11.1V 9 ~ 17V
• Supporting the start of capacitive load instantaneous large current. Disconnect Voltage
• Supporting automatic identification of battery voltage. Discharging Limit
Voltage 10.6V 10.6V 10.6V 9 ~ 17V
• LED indicator of malfunction, buzzer alarm, and liquid crystal display of abnormal information. This helps users identify system failures. Over-Discharge
• Supporting historical data storage for up to 5 years. Delay Time 5s 5s 5s 1 ~ 30s
Equalizing Duration
Time
120Min —— 120Min 0 ~ 600Min
Equalizing Charging 0 ~ 250D(0 refers to close
30Days 0Days 30Days equalizing charging function)
Interval
Parameters
Model ML2420 ML2430 ML2440
System Voltage 12V/24VAuto
Temperature
Protection degree IP32
sensor
ML Series 4
3
7
2 1
5
6
Weight
Communication method
1.4Kg 2Kg
RS232
2Kg
ML2420/2430/2440
Comparison Table of Parameters for Each Type of Battery
1 years Setting Voltage Sealed Lead-Acid Gelled Lead-Acid
Flooded batter y User (User-Defined)
Batter y Type Batter y Batter y
Auto
INPUT IP32 Overvoltage
16.0V 16.0V 16.0V 9 ~ 17V
12V/24V 100V Max. LCD DISPLAY
Disconnect Voltage
Parameters
Parameters Value
Model SR-MT2410
MT Series
Equalizing charge time 1 hour
P
Weight 430g
Pmax
LCD
Auto
IP64 Altitude ≤3000m
INPUT
150V Max. 0 LCD DISPLAY
12V/24V 1s
Dimension 143×71×37.4(mm)
Parameters
Parameters Value Note
Parameters
Battery type Default SLD
HP2450/2460/4830/4840 HP2430/2440 Flooded FLD Sealed SLD GEL GEL Lithium LI
HP Series
AUTO
Solar Charge Controller
Floating charging
voltage 13.8V 13.8V 13.8V –
×3/36V;
USB Charging recovery
voltage 13.2V ×4/48V;
Over-discharge
HP Series Smart Solar Charge Controller recovery voltage 12.5V(settable with the keys)
Over-discharge
voltage 11.0V(settable with the keys)
HP2450/2460/4830/4840/2430/2440
Equalizing
30days – –
charging interval
Equalizing charging
time 1H – –
Light control voltage Light control on 5V, light control off 6 V (light control on plus 1 V)
×1/12V;×2/24V;
Main Features Light control
judgment time 10minutes
×3/36V;×4/48V;
Parameters
Parameters Value
Model SR-HP2410 SR-HP2420
HP Series
Boost charging time 2H
Light control voltage Light control on 5V, ×2/24V; light control off 6V
HP Series Smart Solar Charge Controller
Light control judgment time 1minute
Note: parameter settings shall comply with the following rule, i.e. boost voltage > floating
Main Features charging voltage > over-discharge recovery voltage > over-discharge voltage.
• 12V/ 24 V system voltages are automatically recognized.
• An upgraded 3-stage PWM charging algorithm is adopted. Application of an equalizing charging to the battery periodically or when over
discharged, can effectively prevent the battery from non-equalization and sulfuration, thus extending the battery's service life.
• With temperature compensation employed, charging parameters can be automatically adjusted.
• A wide range of load working modes facilitate the product's application to different types of load.
• The product provides overcharge, over-discharge, overload protection, as well as short-circuit protection.
• By virtue of an advanced load starting method, large-capacitance loads can be started smoothly.
• The product provides a dot matrix graphic LCD screen and a human-machine interface with a key.
• The user-friendly design of browser and dynamic interfaces ensure convenient and intuitive operations.
• Boasting an industrial grade design, the product can function well in various tough conditions.
• TVS lighting protection is adopted.
Parameters
Parameters Value Remarks
Model HP2430N/2440N
Parameters
battery end
Flooded FLD Sealed SLD GEL GEL Lithium LI Default SLD
HP Series
Over-discharge voltage 11.0V(settable with the keys)
Parameters
Parameter Value
Model SR-LM10A
Undervoltage 12.0V;×2/24V
LM Series
Working temperature -35℃ to +65℃;
Dimensions 124.7×69.4×34.0(mm)
LM10A Notice1: If reverse connection of the storage battery, the controller would not be damage, but there is
the negative voltage output from the load will lead to the load damage.
LCD
Notice2: Time delay function when overload, the protection time is related to the ambient temperature.
Auto
INPUT
IP30 When overload, the overload protection will running auto. The first time is 5 seconds,the
PWM LCD DISPLAY LED DISPLAY
12V/24V 55V Max.
second time is 10 seconds, the third time is 15seconds, the fourth time is 30seconds and the
fifth time is 4hours or the second day it will recovery.
Main Features
• Automatic identification of 12V/24V system voltage.
• LED digital display and single key operations which makes operate simply and conveniently.
• Adopting ternary form charging algorithm, charge the storage battery in equalizing charge mode once a week .It can
prevent battery from imbalance and vulcanization effectively, also battery service life will be extended.
• Four working modes which made it convenient to use in all kinds of street lamps and monitoring devices.
• External temperature sensor can realize high-precision temperature compensation.
• Has the electricity protection data function .Parameter can be stored when the power system failure. No need to setting
again. It is very simple and convenient to use.
• Various status indications.
• Over charging protection, over discharging protection, over load, short circuit protection, reverse polarity protection
• TVS lightning protection.
RS232
Mobile phone&APP
BT-1
E4
• Supports cellphone APP, and boasts a plug and play feature andeasy setting
• Employs a dedicated Bluetooth chip with high performance andultra low power consumption
RJ45 LED DISPLAY Error Key • Adopts Bluetooth 4.0 and BLE technologies, boasting advantages ofquick communication, excellent anti-interference
capability, etc.
• Dispenses with external power source, being powered directlythrough the communication port
• Boasts a communication distance of up to 15 m
Main Features
• Adopts a 128*64 LCD screen, with the menus designed with numeric and graphic forms. Model
• With a graphical design, the main menu is artistic as well as informative: it can display up to 10 parameters and states. BT-1
• Able to read the historical data of a certain day.
Input voltage 5V-12V
• A low-power-consumption BLE4.0 feature enables more powerful functions when pairing with a mobile APP (optional).
• Employs two indicator lights to indicate controller abnormalities and communication errors respectively. Standby power consumption 0.04W
• Features a controller abnormality voice alarm function which can be switched on/ off.
• A backlight time setting function is available. Operating power consumption 0.05W
• Able to monitor live data and operating statuses of the controller .On/ off switching, clearing of historical data and
restoring to factory settings can all be done with this unit. Communication distance ≤15m
• Adoption of standard Modbus communication protocol.
Serial baud rate Fixed baud rate 9600bps
Parameters Communication mode RS232
Parameters
Adjustable
Parameter Value Default
or not
Model SR- D M120 SR- D M160
Lead-acid batteries
Equalizing charging voltage (Boost charging voltage+0.2V; ×2/24 V (25 °C)
LITHIUM BATTERY
14.6V
SOLAR CHARGE CONTROLLER
WITH STEP-UP LED DRIVER
Charge Controller for Solar Street Lights Boost charging voltage 7.5V~15.5V;×2/24V(25℃) √ 14.4V
Boost charging time 4 hours
batteries
Yes, No √ No
Lithium
prohibited below 0 °C
MPPT
Overcharge voltage 7.5V~15.5V;×2/24V(25℃) √ 14.6V
Main Features Overcharge recovery
voltage 7.5V~15.5V;×2/24V(25℃) √ 13.6V
• Features true MPPT functions, applicable to monocrystalline, polycrystalline and amorphous silicon solar panels serially connected in various
Over-discharge voltage 7.5V~15.5V;×2/24V(25℃) √ 11.0V
numbers, significantly improving the solar panels' energy utilization ratio.
• MPPT solar charging technology , the maximum solar input voltage Voc ≤ 60V . Over-discharge recovery
voltage 7.5V~15.5V;×2/24V(25℃) √ 12.6V
• The load is stepping up and constant current output which can support maximum 18pcs of LED beads connected in series • Adopts an
improved charging algorithm that supports 12 V and 24 V lead-acid batteries and lithium batteries, and the user can set the operating modes Light control voltage 5V~15V;×2/24V √ 10V
for lead-acid batteries or lithium batteries accordingly.
Light control delay 1~50min √ 1min
• Boasts a load triple-stage brightness adjustment and morning on design, with an operating duration adjustable from 0 to 15 hours and a
power settable from 0 to 100%. Operating temperature -35℃ ~ +65℃
• Features a system status log function, able to record a maximum of 7 days of system status, comprehensively and effectively monitoring the
system's conditions. Protection degree IP68
• Data communication adopts a multi-time two-way handshake protocol and a data compression algorithm, realizing precise and fast data Weight(g) 380 480
transmission.
• Features an intelligent power mode which can extend the battery life to its top limit by adjusting the load power automatically according to the Dimensions (mm) 114x88.3x24.5mm 142x88.3x24.5mm
remaining battery capacity.
• True constant current rather than current-limiting control ensures smooth and stable output current, effectively reducing LED light attenuation Note: parameter settings shall comply with the following rule, i.e. boost voltage > floating
and extending LED service life. charging voltage > over-discharge recovery voltage > over-discharge voltage.
• With an infrared remote control function, operations including setting parameters, reading status and viewing historical data can be conducted.
• A metal case and an IP68 waterproof level enable the device to operate in various kinds of tough conditions.
• An overheat protection function enables the device to scale down the load or shut off the load completely when its temperature exceeds a
certain point.
• A range of protection measures such as battery reverse-connection protection, LED short-circuit and open-circuit protection, etc., put the
system under comprehensive and constant guard.harging current and voltage, load operating status, controller operating status and other data,
and automatically triggers alarms when failures are detected.