Professional Documents
Culture Documents
Plastdepo Tpe 30an TDS
Plastdepo Tpe 30an TDS
Plastdepo Tpe 30an TDS
PLD 30AN
Thermoplastic Elastomers (TPE)
PRODUCT DESCRIPTION
General use SEBS Series, PLD30AN is recommended for Injection Molding applications. If keep under the proper conditions no pre-drying
requested. Recyclability; depends on process between 10% to 30% recycle material can be use with
prime material
Physical
Density 1,18 (±0,02) gr/cm3 ISO 2781
Mechanical
Tensile Strength At Break 2,2 MPa ISO 37
Thermal
Brittleness Temperature -50 °C ASTM D 746
Molding Temperatures
Mold Temperature 25 - 40 °C
*The values given are typical values measured on the product. These values should not be considered as specification.
CONTACT