Professional Documents
Culture Documents
FCO 78100083 - ODU Connector RF Coil
FCO 78100083 - ODU Connector RF Coil
Intera Achieva
RF coils
APPLIES TO:
First delivered Intera Achieva systems
Trace items:
Trace item New trace Name trace item
item
989603011662 989603011663 Synergy spine coil
TITLE:
ODU connector RF coil
FCO781 00083 (04.0) 1
(c) 2004 Koninklijke Philips Electronics N.V.
ALL RIGHTS RESERVED
LIST OF PAGES & DRAWINGS:
FCO781 00083 1 (04.0)
2 (04.0)
3 (04.0)
4 (04.0)
5 (04.0)
6 (04.0)
7 (04.0)
8 (04.0)
9 (04.0)
10 (04.0)
ANR (04.0)
INTRODUCTION:
Symptom : Low reliability of the ODU connector on the RF coils
Cause : Too high connector chassis tolerances
Remedy : Replace chassis and keyings of ODU connectors on RF coils
This FCO must be executed together with FCO781 00081 and FCO781 00082
MODIFICATION KIT / PARTS REQUIRED: 4522 132 23141 RETROFIT KIT COIL CONNECTOR
PHILIPS
Kit contents
12NC Description Qty
4522 132 12131 Set labels retrofit PICU 1
4522 132 22991 Retrofit kit coil connector containing: 1
4522 090 12321 - Keying module female 3
4522 090 12191 - Chassis 1
4522 090 12341 - Dummy coax contacts 15
4522 981 16991 This FCO 1
Ordering Info: Please investigate the required quantity of modification kits and supply a purchase
order at SLI Best.
Remove screws
Remove screws
3. Carefully remove the chassis part (figure 7: item 2) from
the connector modules. Do not change the order of the Figure 3 – ODU Coil connector
connector modules and do not rotate the modules.
Remove chassis
Connector module
Insert RF pin
6. Mount the new supplied chassis and the new keying strips
in the reverse order.
Mount the connector modules and keying strips in the
correct order. For the correct order, select the table (from
table 1 to table 7) that corresponds with the 12NC code of
your adapter.
7. Remove the 12NC label from the adaptor and glue the
supplied label with the same 11NC and increased last digit.
Refer to table 8 for an overview of labels.
Figure 8 – Old and new keying Figure 9 – Old and new frame
OLD FRAME
OLD KEYING NEW KEYING
One dot
Two dots
NEW FRAME
Table 1 – Layout of connector for coil Synergy Spine 9896 030 1166x
Module 1 2 3 4 5 6 7 8 9 10
Unit
1
2 C1 pin 1..4 Coax 01 Coax 02 coax 03 coax 04
3
4
5 C2 pin 1..4 spare spare spare spare
6
si 7 k_b1
K1
de
8 pin 1..7 RD BK ORG WH ORG BK spare
of
9 P1
UL
10 pin 8..14 RD BK spare spare spare BK spare
-
m 11 K2 k_b2
ar 12 S1 pin 1..10 spare spare BK WH/BU WH/GN spare spare WH/YE WH/VT WH/GRAY
ki 13 S2 pin 1..10 spare spare spare spare spare spare spare WH/BK spare spare
14 K3 k_b3
15
16 C3 pin 1..4 spare spare spare spare
17
18
19 C4 pin 1..4 coax 05 spare spare spare
20
Table 2 – Layout of connector for Synergy Body Coil 9896 030 1161x
Module 1 2 3 4 5 6 7 8 9 10
Unit
1
2 C1 pin 1..4 Coax 01 Coax 02 coax 03 coax 04
3
4
5 C2 pin 1..4 spare spare spare spare
6
7 K1 k_b1
side of UL-marking
Unit
1
2 C1 pin 1..4 Coax 01 Coax 02 spare spare
3
4
5 C2 pin 1..4 spare spare spare spare
6
7 K1 k_b1
side of UL-marking
Table 4 – Layout of connector for Synergy Body Coil 9896 030 1165x
Module 1 2 3 4 5 6 7 8 9 10
Unit
1
2 C1 pin 1..4 Coax 01 Coax 02 Coax 03 spare
3
4
5 C2 pin 1..4 spare spare spare spare
6
7 K1 k_b1
side of UL-marking
Table 5 – Layout of connector for 3T Quad Head Coil 9896 030 1129x
Module 1 2 3 4 5 6 7 8 9 10
Unit
1
2
3 PWR1 pin 1..2 coax spare
4
5
6
7 C1 pin 1..4 spare spare spare spare
side of UL-marking
8
9 K1 k_b1
10 pin 1..7 BN BU-VT OG RD OG BU-VT spare
11 P1
12 pin 8..14 BN BU-VT spare spare spare BU-VT spare
13 K2 k_b2
14 S1 pin 1..10 spare spare BU-VT YE spare spare spare BU-VT BK WH/RD
15 S2 pin 1..10 spare spare spare spare spare spare spare BU-VT spare spare
16 S3 pin 1..10 spare spare spare spare spare spare spare spare spare spare
17 K3 k_b3
18
19 C2 pin 1..4 Coax spare Coax spare
20
Unit
1
2 C1 pin 1..4 Coax 01 Coax 02 Coax 03 Coax 04
3
4
5 C2 pin 1..4 spare spare spare spare
6
7 K1 k_b1
side of UL-marking
Table 7 – Layout of connector for 8 ch Sense Knee Coil 1.5T 9896 030 1160x
8 ch Sense Head Coil 1.5T 9896 030 1128x
Module 1 2 3 4 5 6 7 8 9 10
Unit
1
2 C1 pin 1..4 Coax 01 Coax 02 Coax 03 Coax 04
3
4
5 C2 pin 1..4 spare spare spare spare
6
7 K1 k_b1
side of UL-marking
989603011633 Synergy shoulder flex-M 452213231173 Syn.flex-M coil 452213231183 Syn.FL-M driverbox
989603011653 Synergy H/N coils 452213219863 Syn.head/neck coil 452213231133 Driverbox SHNC
989603011623 Synergy Flex-L 452213231153 Sense flex-L coil 452213231183 Syn.FL-L driverbix
989603011643 Synergy Flex-S 452213231193 Syn flex-S coil 452213231203 Syn.FL-S driverbox
989603012063 Synergy cardiac coil 452213219883 Syn.card.coil (CZ) 452213231253 Onderbak cardiac
DOCUMENTATION:
Log this action in the section "History Record" of the System Reference Manual.
File this FCO in the section "Service Information" of the System Reference Manual.
Fill out the attached Action Notification Report and send it to your SSD Customer Services Manager.
CLASSIFICATION : Proactive Action for Performance FCO REF. NO.: FCO781 00083
HOSPITAL / ADDRESS :
PRODUCT NUMBER :
ACTION ON THIS UNIT WAS: (select one) JOB NO. / SERVICE INCIDENT NO.:
Not completed as this unit is not affected per instruction because: (state reason)
BRANCH
REGION / SERVICE UNIT /
DEALER : SERVICE AREA NO.: