Professional Documents
Culture Documents
11 - W2 Class M - Building Work 2024 - Batch Security
11 - W2 Class M - Building Work 2024 - Batch Security
BQ using MS 2701:2018
(CESMM) & MyCESMM2 for
Civil Engineering works
Webinar 2
CLASS M:
BUILDING WORK
CLASS M- BUILDING WORKS
MyCESMM2
Class M – Building Work
CLASS M
BUILDING WORK
1 of 33 Slides
Copyright@CIDB.Malaysia2018
M1
MyCESMM2
Class M – Building Work
Back gutter
Apron
flashing Hipped end
Parapet Pointed
verge Valley
Coping Hip
Eaves
Pitch
Eaves
Stepped Abutment
Barge board flashing
Concealed
Eaves gutter gutter
Gable
Fascia
Copyright@CIDB.Malaysia2018
M2
Copyright@CIDB Malaysia2012 1
CLASS M- BUILDING WORKS
MyCESMM2
Class M – Building Work
First division Second division Third division Unit
1. Roofing work 1. Roof structure 1. Timber of stated member m
sizes
2. Timber of stated roofing m2
system and components
to be designed by the
contractor
3. Metal of stated roof kg
structure member sizes
4. Metal of stated roofing m2
system and components
to be designed by the
contractor
Copyright@CIDB.Malaysia2018
M3
MyCESMM2
M1 Class M – Building Work
The area measured for roofing system and
components to be designed by the contractor shall
be the plan area of roof structures.
D1
Proprietary roofing system shall be roofing system
and components to be designed by the contractor.
C1
Connecting plate
Timber roof structure shall be deemed to include
connecting plates, bolts and nuts, and other
fastening system.
C2
Metal roof structure shall be deemed to include
connecting plates, bolts and nuts, all welding, and
other fastening systems.
A1
Item description for roof structure shall state the
member nominal size, grade of materials, and Bolts & nuts
structural locations for roof structures not designed
by the contractor.
Copyright@CIDB.Malaysia2018 M4
Copyright@CIDB Malaysia2012 2
CLASS M- BUILDING WORKS
MyCESMM2
M2 Class M – Building Work
Roof covering, underlay, and insulation for curved or domed
surface shall not be distinguished by angle of inclination.
M3
The areas measured for roof covering, underlay, and
insulation shall be those of the surface covered. No
deduction from the areas measured shall be made for holes Roof tiles
and openings in the roof covering each not exceeding 0.5
m² in area.
D2
Flat sheet shall be classed for a broad, flat, and thin piece of
felt or material, usually in square and rectangular shapes.
D4
Tiles shall be classed for discrete material either flat or
profiled, laid in overlapping rows, and are usually square or
rectangle Profiled roof sheeting
Copyright@CIDB.Malaysia2018 M5
MyCESMM2
C3 Class M – Building Work
Items for roof coverings, underlay and
insulation shall be deemed to include
preparing surfaces, forming joints,
overlaps, mitres, angles, fillets, built up
edges, and laying to falls or cambers,
cutting, notching, bending and bedding.
A2
Item description for roof covering shall Wire mesh Aluminium foil
state the angle of inclination to the
horizontal.
A3
Item description for roof covering for
curved or domed surfaces shall be
described, and the radius of the curvature
of the surface shall be so stated.
A4
Item description for roof covering,
underlay and insulation shall state the
materials used, locations, number and
thickness of coatings or layers
Rock wool
Copyright@CIDB.Malaysia2018 M6
Copyright@CIDB Malaysia2012 3
CLASS M- BUILDING WORKS
MyCESMM2
Class M – Building Work
M143 Roofing work; insulation; Rock wool [50 mm thick sheet ; size m2
1200 mm x 600 mm as per specification (clause….)]
Copyright@CIDB.Malaysia2018
M7
MyCESMM2
Class M – Building Work
First division Second division Third division Unit
1. Roofing work 5. Roofing ancillaries 1. Eaves and verges m
2. Fascia m
3. Flashing m
4. Kerbs m
5. Hood nr
6. Roof ventilators nr
7. Soaker nr
6. Flat sheet 1. Crank and upstand m
components 2. Ridge, hip, and vertical m
7. Profiled sheet angle capping
components 3. Roof light and special nr
sheets
4. Transparent sheet nr
5. Ventilator sheet nr
6. Sheet with soaker flanges nr
7. Ridge ventilator nr
8. Tiles components 1. Valley m
2. Mitred hips m
3. Mitred vertical angles m
4. Ridge and hip capping m
5. Vertical angle m
6. Saddles nr
7. Glass tiles nr
Copyright@CIDB.Malaysia2018
M8
Copyright@CIDB Malaysia2012 4
CLASS M- BUILDING WORKS
MyCESMM2
C4 Class M – Building Work
Items for roofing ancillaries, 40 x 20 battens
50 x 20 counter battens
flat/profiled sheet 305 x 205mm slates
40°
C5 Ceiling joists
C
A5
Item description for roofing J
ancillaries shall state the work F
G
Copyright@CIDB.Malaysia2018 M9
Key Viewof Roof
MyCESMM2
Class M – Building Work
Eaves closure and
flashing piece Cranked crown
Translucent Light sheet
Cranked crown
lining panel
Asbestos
cement gutter
G J Ridge Detail
H Valley detail
Closure piece
with extended
nib
r
p fo s
m la heet
75m thick s
Flashing m for
6m lap ets
piece mm she
150 thick C Eaves Filler And Flashing Pieces
A m
Eaves Detail 10m
B End Lap Detail At Intermediate Purlins
Copyright@CIDB.Malaysia2018 M10
Copyright@CIDB Malaysia2012 5
CLASS M- BUILDING WORKS
MyCESMM2
Class M – Building Work
Metal hood
Mortar pointing
Asphalt to
150mm min.
concrete upstand Asphalt skirting
Asphalt
Asphalt
Sheathingfelt
Black
sheathing 2-coat Insulation board
felt angle fillet Metal foil vapour barrier
folded over insulation
Copyright@CIDB.Malaysia2018 M11
MyCESMM2
Class M – Building Work
Copyright@CIDB.Malaysia2018
M12
Copyright@CIDB Malaysia2012 6
CLASS M- BUILDING WORKS
MyCESMM2
Class M – Building Work
First division Second division Third division Unit
2. Roofing work 1. Gutters and 1. Gutters m
downpipes 2. Fittings to gutters nr
3. Downpipes m
4. Fittings to downpipes nr
M4 A6
Lengths of gutters and downpipes shall be Item description for gutters and
measured along their centre lines and shall downpipes shall state the type,
include lengths occupied by fittings, with no principal dimensions, and materials
allowance for laps. of the components.
D5
Fittings to gutters shall include bends, angles,
stop ends, and outlets. Fittings to downpipes
shall include bends, swan necks, shoes, and
roof outlet, fixed directly to downpipes.
C6
Items for gutters and downpipes shall be
deemed to include fixing and supply of fixing
components
Gutter & downpipe M13
Copyright@CIDB.Malaysia2018
MyCESMM2
Class M – Building Work
Copyright@CIDB.Malaysia2018
M14
Copyright@CIDB Malaysia2012 7
CLASS M- BUILDING WORKS
MyCESMM2
Class M – Building Work
First division Second division Third division Unit
3. Waterproofing 1. Asphalt 1. Sloping m2
2. Bituminous 2. Horizontal m2
3. Sheet metal 3. Vertical m2
4. Waterproofing 4. Surfaces of width not m
sheeting exceeding 300mm
5. Waterproof coating 5. Isolated group of nr
6. Rendering in surfaces not exceeding
ordinary cement 1m²
mortar 6. Lining to other stated nr
7. Rendering in fixtures
waterproof cement
mortar
8. Sprayed or brushed
waterproofing
4. Sheet lining 1. Butyl rubber
membrane 2. Ethylene propylene
monomer rubber
3. PVC
4. Polypropylene
5. Polyethylene
6. Polyurethane
7. Proprietary system
Copyright@CIDB.Malaysia2018
M15
MyCESMM2
M5 Class M – Building Work
The areas measured for waterproofing and
sheet lining membrane shall be those of
the surfaces covered. No deduction from
the areas measured shall be made for
holes and openings in the waterproofed
surfaces each not exceeding 0.5 m² in
area.
M6
Isolated groups of surfaces of different
shapes or dimensions shall be measured as
separate items.
D6 Waterproofing
Sloping: Angle of inclination from the
horizontal is 5° - 80°.
D7
Horizontal: Angle of inclination from the
horizontal is 0° - 5°.
D8
Vertical: Angle of inclination from the
horizontal is 80° - 90°.
Copyright@CIDB.Malaysia2018
M16
Copyright@CIDB Malaysia2012 8
CLASS M- BUILDING WORKS
MyCESMM2
C7 Class M – Building Work
Items for waterproofing and
sheet lining membrane shall
be deemed to include
preparing surfaces, forming
joints, overlaps, mitres, angles,
fillets, built up edges, and
laying to falls or cambers.
A7 Sheet lining
Item description for membrane
waterproofing and sheet
lining membrane shall state
the materials used, and the
number and thickness of
coatings or layers and
method of application as per
manufacturer’s instructions.
A8
Item description for isolated
groups of surfaces shall
identify the work to be
waterproofed and its location
shall be so stated.
Copyright@CIDB.Malaysia2018
M17
MyCESMM2
Class M – Building Work
Copyright@CIDB.Malaysia2018
M18
Copyright@CIDB Malaysia2012 9
CLASS M- BUILDING WORKS
MyCESMM2
Class M – Building Work
First division Second division Third division Unit
5. Windows and 1. Timber 1. Doors sub-frames nr
doors 2. Metal 2. Windows nr
3. Plastic 3. Doors subframe or lining nr
sets
4. Door leaf nr
5. Ironmongery nr
6. Anti-vermin netting nr
7. Screens and borrowed nr
lights
8. Roof lights nr
6. Glazing 1. Glass m2
2. Glass in large m2
panes
3. Special glass nr
4. Hermetically sealed nr
units
5. Mirrors nr
6. Patent glazing nr
Copyright@CIDB.Malaysia2018
M19
MyCESMM2
D9 Class M – Building Work
All fire-rated doors shall be
obtained from approved
manufacturers and in compliance
with Jabatan Bomba dan
Penyelamat Malaysia or by other
relevant governing authorities.
D10
Hinges, door closers, locks, and
handles shall be classed as
ironmongery. Casement window
Fire rated door
C8
Items for windows and doors shall
be deemed to include fixing,
supply of fixing components, and
drilling or cutting of associated
work.
C9
Items for windows and doors shall
be deemed to include all
associated glazing work as
expressly required. Ironmongery
Copyright@CIDB.Malaysia2018
M20
Copyright@CIDB Malaysia2012 10
CLASS M- BUILDING WORKS
MyCESMM2
C10 Class M – Building Work
All necessary fixing with screws to
match the ironmongery shall be
deemed to be included with the
items.
C11
All locks deemed to be supplied
with master keys and keys.
A9
Item description for windows and
doors shall identify the shape, size
and type. Glazing
A10
Item description for windows and
doors shall state glazing
requirements.
A11
Item description for ironmongery
shall state the materials, type and
design
Copyright@CIDB.Malaysia2018
M21
MyCESMM2
D11 Class M – Building Work
Panels which exceeded 4m² shall A13
be classed as glass in large panes.
Item description for glazing shall state work
which is curved or faceted.
D12
The following materials used in A14
glazing shall be classed as special
glass: Item description shall state the construction of
hermetically sealed units.
a) glass whose thickness
exceeds 10 mm
b) non-rectangular panes of
A15
glass. Item description for special glass, hermetically
c) toughened, laminated, solar
sealed units, mirrors and patent glazing shall
control and other speciality state the shape and size of panes.
glass
d) acrylic, polycarbonate and
similar materials
A12
Item description for glazing shall
state the materials, their nominal
thickness, the method of glazing
and the method of securing the
glass and incidental metal work
supporting patent glazing
Copyright@CIDB Malaysia2012 11
CLASS M- BUILDING WORKS
MyCESMM2
Class M – Building Work
Copyright@CIDB.Malaysia2018
M23
MyCESMM2
Class M – Building Work
First division Second division Third division Unit
7. Finishes 1. Floor finishes 1. Tiles m2
2. Cement and sand m2
screed
3. Granolithic m2
4. Wash aggregates m2
5. Carpet m2
6. Vinyl m2
7. Floor hardener m2
8. Timber laminate m2
2. Skirting 1. Tiles m
2. Timber m
3. Concrete m
Floor
tiles
Granolithic floor
Copyright@CIDB Malaysia2012 12
CLASS M- BUILDING WORKS
MyCESMM2
M7 Class M – Building Work
No deduction from areas of finishes
A16
shall be made for holes and openings
each not exceeding 0.5m² in area. Item description for finishes shall state the
materials and thickness.
C12
A17
Items for floor finishes, wall finishes
and skirting to floor shall be deemed Item description for carpet shall state the
to include fixing, supply of fixing knot density.
components, and drilling or cutting of
associated work. A18
Item description for skirting to floor shall
C13 state the height
Items for floor finishes, wall finishes
and skirting to floor shall be deemed
to include preparing surfaces, forming
joints, mitres, angles, fillets, built-up
edge and laying to cambers or falls.
C14
Items for floor finishes, wall finishes
and skirting to floor with tiles shall be
deemed to include cement mortar
screed where applicable
Skirting M25
Copyright@CIDB.Malaysia2018
MyCESMM2
Class M – Building Work
M714 Finishes; Floor finishes; [10 mm] thick wash aggregates finish to m2
floor
M722 Finishes; Skirting to floor; Crank B timber skirting [... mm high x ... m
mm] thick; [rounded top edge]
Copyright@CIDB.Malaysia2018
M26
Copyright@CIDB Malaysia2012 13
CLASS M- BUILDING WORKS
MyCESMM2
Class M – Building Work
First division Second division Third division Unit
7. Finishes 3. Wall finishes 1. Tiles m2
2. Cement and sand m2
plastering
3. Granolithic m2
4. Wash aggregates m2
5. Spray tiles m2
6. Prefabricated panel m2
C15
Items for ceiling finishes shall be deemed to
include any temporary staging required.
C16
Items for suspended ceilings shall be
deemed to include associated primary
support or hanger systems. Wall tiles
Copyright@CIDB.Malaysia2018
M27
MyCESMM2
C17 Class M – Building Work
Items for ceiling shall
be deemed to include
sloping ceiling.
Suspended ceiling
A19
Item description for
prefabricated panels
shall state the size and
number of panels.
A20
Item description for
suspended ceiling Prefabricated wall
shall state the type panels
and material of
support system and
material of ceiling.
A21
Item description for
access panel in
ceiling shall state the
overall dimensions.
Access panel
Copyright@CIDB.Malaysia2018
M28
Copyright@CIDB Malaysia2012 14
CLASS M- BUILDING WORKS
MyCESMM2
Class M – Building Work
M731 Finishes; Wall finishes; [200 mm x 250 mm] ceramic wall tiles m2
Copyright@CIDB.Malaysia2018
M29
MyCESMM2
Class M – Building Work
First division Second division Third division Unit
8. Floor and wall 1. Wall partitions 1. Solid m2
system 2. Full board m2
3. Half board with fixed m2
glass
4. Cubicle sets nr
M8
The length measured for wall
partitions shall exclude the length of
voids which extend to the full height
of the partition.
C18
Items for wall partitions shall be
deemed to include fixing, supply of
fixing components, and drilling or
cutting of associated work.
Copyright@CIDB.Malaysia2018
Solid wall M30
Copyright@CIDB Malaysia2012 15
CLASS M- BUILDING WORKS
MyCESMM2
C19 Class M – Building Work
Items for wall partitions shall
be deemed to include
forming holes, cutting and
making good for services.
A22
Item description for wall
partitions shall state the
materials, finishes and finished
thickness.
Full board wall Half board with fixed glass
A23
Item description for cubicle
sets shall state the overall
dimensions.
D13
Item for raised access floor
refers to a false floor raised
from the ground to serve as
an accessible floor system for
the laying of flooring services
such as power lines and Cubicle set Raised floor
cables
Copyright@CIDB.Malaysia2018
M31
MyCESMM2
Class M – Building Work
M811 Floor and wall system; wall partitions; [100 mm] thick eco-solid m2
wall system.
M812 Floor and wall system; wall partitions; [10 mm] thick full board m2
M813 Floor and wall system; wall partitions; [10 mm] thick half board m2
with 6 mm thick fixed float glass
M820 Floor and wall system; Raised access floor, [600 x 600 x 33 mm m2
thick] high density processed timber panels sandwiched
between two sheets of equal thickness plastic laminates.
Copyright@CIDB.Malaysia2018
M32
Copyright@CIDB Malaysia2012 16
CLASS M- BUILDING WORKS
MyCESMM2
Class M – Building Work
THE END
Copyright@CIDB.Malaysia2018
M33
Copyright@CIDB Malaysia2012 17