Professional Documents
Culture Documents
Isolated Foundation - 15
Isolated Foundation - 15
Isolated Footing 55
1m
0.5 m
Elevation
X 1.5 m
0.5 m
0.7 m
3m
1.5 m
3m
Plan
Input Values
Footing Geometry
Column Dimensions
Pedestal
Include Pedestal : No
Pedestal Shape : N/A
Design Parameters
Soil Properties
Global Settings
Top Reinforcement Option : Calculate only when foundation is subjected to uplift forces
Concrete Design Option : Net Pressure(Gross Pressure - Self Weight Pressure)
Top Reinforcement Factor : 1.00
------------------------------------------------------
Design Calculations
Typesetting math: 35%
Load Combinations
Typesetting math: 35% 247 199.0650 191.4624 150.6992 158.3018 472.0000 9.00
Actual Area in Contact for all ultimate load cases exceeds the minimum required. Hence Safe
Maximum Corner Pressure from all ultimate load cases is less than the allowable. Hence Safe
Shear Calculation
X 1.5 m
Z
0.205 m
1.5 m
Plan
Total Footing Depth, D = 0.50m
Calculated Effective Depth, d = D - Ccover - 1 * db = 0.41 m
For rectangular column, β = Bcol / Dcol = 1.40
0.74 m
Z
1.5 m
0.74 m
Plan
From ACI Cl. 22.5.5.1, Vc = 0.17×λ × bw× d × fc' = 1171.16 kN
Distance of critical section from top left corner
along Z, DZ = 0.5 × L ± Dcol-d+ Ozd = 0.74 m
Check that 0.75 X Vc > Vux where Vux is the shear force for the critical load cases at a distance d from the face of the column caused by bending about the X axis.
X 1.5 m
0.84 m 0.84 m
1.5 m
Plan
From ACI Cl. 22.5.5.1, Vc = 0.17×λ × bw× d × fc' = 1171.16 kN
Distance of critical section from top left corner along
X, DX = 0.5 × L ± Bcol-d+ Oxd = 0.84 m
Check that 0.75 X Vc > Vuz where Vuz is the shear force for the critical load cases at a distance d from the face of the column caused by bending about the Z axis.
25 - 13 mm
Calculate the flexural reinforcement along the X direction of the footing. Find the area of steel required.
The strength values of steel and concrete used in the formulae are in Mpa
From ACI318-2011 Appendix B 8.4.2, ρbal = 0.85 × β1 × fc'fy ×(600600+ fy) = 0.03116
Maximum Reinforcement Ratio corresponding to εt
= 0.01986
= 0.005 = ρmax =
13 mm @ 115mm o.c.
Because the number of bars is rounded up, make sure new reinforcement ratio < ρmax
Total reinforcement area, As_total = Nbar X (Area of one bar) = 3224.99 mm2
d= D - Ccover - 0.5 X (dia. of = 0.41 m
one bar)
Reinforcement ratio, ρ = As_totald × bw = 0.00265
From ACI Cl. 25.2.1, minimum req'd clear distance between bars
Cd = max (Diameter of one bar, 1.0" (25.4mm), Min. User Spacing) = 80.00mm
Provided Steel Area / Required Steel Area = 1.02
Calculate the flexural reinforcement for Mz. Find the area of steel required
The strength values of steel and concrete used in the formulae are in ksi
mm @ o.c.
25 - 13 mm
Calculate the flexural reinforcement along the Z direction of the footing. Find the area of steel required.
The strength values of steel and concrete used in the formulae are in Mpa
From ACI318-2011 Appendix B 8.4.2, ρbal = 0.85 × β1 × fc'fy ×(600600+ fy) = 0.03116
Maximum Reinforcement Ratio corresponding to εt
= 0.01986
= 0.005 = ρmax =
Because the number of bars is rounded up, make sure new reinforcement ratio < ρmax
Total reinforcement area, As_total = Nbar X (Area of one bar) = 3224.99 mm2
d= D - Ccover - 1.5 X (dia. of 0.41 m
=
one bar)
Reinforcement ratio, ρ = As_totald × bw = 0.00265
From ACI Cl. 25.2.1, minimum req'd clear distance between bars
Cd = max (Diameter of one bar, 1.0" (25.4mm), Min. User Spacing) = 80.00mm
Provided Steel Area / Required Steel Area = 1.01
Bending moment for uplift cases will be calculated based solely on selfweight, soil depth and surcharge loading.
As the footing size has already been determined based on all servicebility load cases, and design moment calculation is based on selfweight, soil depth and surcharge
only, top reinforcement value for all pure uplift load cases will be the same.
Calculate the flexural reinforcement for Mx. Find the area of steel required
The strength values of steel and concrete used in the formulae are in ksi
13 mm @ 140mm o.c.
Along Z on Bottom
13 mm 25 71.25 70.83
Face
Along X on Bottom
13 mm 25 71.25 70.83
Face
Along Z on Top
13 mm 21 59.85 59.50
Face
Along X on Top
13 mm 21 59.85 59.50
Face
Concrete
3
- Length (m) Width (m) Thickness (m) Volume (m )
Formwork
Footing : 6.00 m2
Pedestal : 0.00 m2
Total : 6.00 m2
Soil Excavation
X X
Z Z
21 - 13 mm
21 - 13 mm
Typesetting math: 35%
3m
0.5 m
28-04-2024 12:50:35
Plan
1.5 m
Elevation
BOTTOM 25 - 13 mm
TOP 21 - 13 mm
Dimensions (m) Reinforcement
L B D AstX(T) AstZ(T) AstX(B) AstZ(B)
Foundation
1.5 m
3m 3m 0.5 m 21 - 13 mm 21 - 13 mm 25 - 13 mm 25 - 13 mm
l b h Main Reinforcement Trans Reinforcement
TOP 21 - 13 mm Pedestal
N/A N/A N/A N/A N/A
BOTTOM 25 - 13 mm
Plan