Professional Documents
Culture Documents
DS HD-125V Power Cube R4
DS HD-125V Power Cube R4
QB Rectifier
Charger
Our revolutionary Benning Power QB is designed to address
critical DC load powering and battery charging
requirements in a wide range of stationary battery plant
applications. HDi Compact Rectifiers combine rugged
dependability with the latest high frequency power
conversion design, to provide you with the highest quality
high frequency rectifiers on the market today. These units Benning Power QB Rectifier Shelf (19”)
are modular in design and can be equipped to meet all of With MCU and Five, 20A Modules
your DC Power requirements.
This system features a much smaller size, and reduced weight when compared to previous
generations of battery charges. In addition, higher efficiencies will contribute to significant
energy and operating savings.
The HDi Compact can be configured for up to ten Benning 2500 Watt, 20 Ampere rectifier
modules. The system is available as a Wall Mounted unit or can be mounted in a 19” or 23”
Relay Rack. AC input voltages are available in: single phase (120VAC (output derated) and
208V or 240VAC); and in three phase (208VAC and 277/480VAC). Other options include
Ground Fault Monitoring, Surge Arrestor, and SNMP remote monitoring.
Power QB Series systems are available in a wide variety of products, including: 24VDC and
48VDC rectifiers, Inverter systems, and DC/DC converters.
Key Features
100
Super Efficiency 90
Robust Design for Grid Hardening and 80
Resiliency 70
Efficiency (%)
N+1 Redundancy 60
50
Power Factor is 0.99 Typical, at Full Load 40
No Single Point of Failure 30
Ease of Installation and Maintenance 20
Hot-Plug Technology 10
0
High Frequency Topology
0 25 50 75 100
Compact 19” Relay Rack or Wall Mount
Output Power (%)
Light Weight
HD-125 Power QB (R4) © Benning Power Electronics 2013
Specifications are subject to change without notice
Technical Specifications
System Voltages Available Single Phase: 120VAC (output derated) and 240VAC
Three Phase: 208VAC and 277/480VAC
Maximum Configurable System Output 100A with one rectifier shelf, 200A with two shelves
Indicators (Rectifier Modules) Rectifier On, Rectifier Off, and Rectifier Fail
Alarm Indicators, Metering - MCU Output Current, Output Voltage, Float, Boost, Battery Test,
Battery Test Fault, Rectifier Fault, Rectifier AC Fail, Low DC
Voltage, High DC Voltage, Output Breaker Tripped
Rectifier Module Power Output Rating @ Input Voltage 2500W each @ 175-277VAC, 1400W @ 120VAC
DC
Heat Output Per Module 820 BTUs per hour @ 100% load
* Factory Default