UST-A0030-124S Boquerel Giratorio Emco - Ficha Técnica

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

Fill Adapters

A0030-124S Fill Swivel Adapter


Material
Body: Brass
O-rings: Viton® 3.75”
4.4” Installed
Gasket: Buna-N
Height
Viton® is a registered trademark
of The Chemours Company

5.5”

The Emco Wheaton A0030-124S Swivel Fill Adapter typically installs on the tank fill riser. The top of the
adapter rotates 360 degrees while the base is stationary, preventing accidental loosening from the riser
during fuel deliveries. The A0030-124S is field serviceable using the kits below. Use with the A0097 Fill
Cap. Use the Emco Wheaton A0081-001 Adapter Wrench for installation and removal. ■ Complies with EPA 40 CFR Part 63
Cam &
Model No. Material Thread Size Groove Lbs.
* A0030-124S Brass 4” Female NPSM 4” 8.0
** A0030-124SE Brass 4” Female NPSM 4” 8.0
*Phase 1 EVR E.O. VR-105
**Nickel plated, for use with E85, DEF & ULSD
569924 Gasket Replacement
494301 O-ring Replacement

A0030 Fill Adapter


Material C Installed
B Height
Body: Aluminum or Brass
Gasket: Buna-N Lug (2)
A

The Emco Wheaton A0030 Adapter is designed for use with conventional dual point fill
systems. Features recessed threads for easy installation and positive seating on riser pipes.
Use with the A0097 Fill Cap. Notched variants are for use with the A0032-001 Adapter
Clamp and comply with EPA 40 CFR Part 63 requirements.
Cam &  A0030-024A
Model No. Material Thread Size Lugs Notches Groove Lbs. A B C
Notch (2)
**A0030-014 Aluminum 4” Female NPSM No No 4” 1.8 5.5” 4.0” 2.0”
A0030-024 Brass 4” Female NPSM Yes No 4” 2.6 4.9” 2.5” 1.7”
* A0030-024A Aluminum 4” Female NPSM Yes Yes 4” 1.0 4.9” 2.5” 1.7”
A0030-024BA Aluminum 4” Female BSPP Yes Yes 4” 1.0 4.9” 2.5” 1.7”
A0030-024N Brass 4” Female NPSM Yes Yes 4” 2.6 4.9” 2.5” 1.7”
* Most common variant 409628 Gasket Replacement ■ CARB E.O. G-70-97-A
** Phase I EVR E.O. VR-105 ULC Listed MH27242

A0030 Tank Probe Adapter


The Emco Wheaton A0030-014F Tank Probe Adapter is designed for use with the Franklin
INCON
Fueling INCON Tank Probe. Includes the aluminum body, aluminum support washer and two Support Plate
rubber gaskets. INCON support plate not included.
Support
Cam &  Outside Overall Install Washer
Model No. Material Thread Size Lugs Groove Lbs. Dia. Ht. Ht.
A0030-014F Aluminum 4” Female NPSM No 4” 1.9 5.5” 4.0” 2.0”

Emco Wheaton Retail ■ 2300 Industrial Park Drive ■ Wilson, NC 27893 ■ 252-243-0150 7

You might also like