Professional Documents
Culture Documents
HUAWEI S6720 Switch Product Description-1
HUAWEI S6720 Switch Product Description-1
Product Description
Issue 12
Date 2016-11-09
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website: http://e.huawei.com
Intended Audience
This document describes the positioning, characteristics, architecture, link features, service
features, application scenarios, operation and maintenance functions, and technical
specifications of the switch.
This document helps you understand the characteristics and features of the switch.
This document is intended for:
l Network planning engineers
l Hardware installation engineers
l Commissioning engineers
l Data configuration engineers
l On-site maintenance engineers
l Network monitoring engineers
l System maintenance engineers
Statement
The device provides the mirroring function for network monitoring and fault management,
during which communication data may be collected. Huawei alone is unable to collect or save
the content of users' communications. It is suggested that you activate the functions based on
the applicable laws and regulations in terms of purpose and scope of usage. You are obligated
to take considerable measures to ensure that the content of users' communications is fully
protected when the content is being used and saved.
The device provides the NetStream function for network traffic statistics collection and
advertisement, during which data of users may be used. You are obligated to take considerable
measures, in compliance with the laws of the countries concerned and the user privacy
policies of your company, to ensure that the data of users is fully protected.
Disclaimer
This document is designed as a reference for you to configure your devices. Its contents,
including web pages, command line input and output, are based on laboratory conditions. It
provides instructions for general scenarios, but does not cover all use cases of all product
models. The examples given may differ from your use case due to differences in software
versions, models, and configuration files. When configuring your device, alter the
configuration depending on your use case.
The specifications provided in this document are tested in lab environment (for example, the
tested device has been installed with a certain type of boards or only one protocol is run on
the device). Results may differ from the listed specifications when you attempt to obtain the
maximum values with multiple functions enabled on the device.
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol Description
Change History
Updates between document issues are cumulative. Therefore, the latest document version
contains all updates made to previous versions.
Contents
2 Application Scenarios...................................................................................................................5
2.1 Application of the S6700 in a Data Center.....................................................................................................................6
2.2 Application of the S6700 on a Large-scale Enterprise Campus Network...................................................................... 7
3 Product Performance.....................................................................................................................8
3.1 Product Features Supported by V200R010C00..............................................................................................................9
3.2 Product Features Supported by V200R009C00............................................................................................................16
3.3 Product Features Supported by V200R008C00............................................................................................................24
3.4 Product Features Supported by V200R005C00............................................................................................................31
3.5 Product Features Supported by V200R003C00............................................................................................................39
3.6 Performance Specifications.......................................................................................................................................... 46
4 Hardware Information................................................................................................................47
5 References..................................................................................................................................... 49
1 Product Overview
prevent attackers from exhausting MAC address entries by using bogus source MAC
addresses. This function minimizes packet flooding that occurs when MAC addresses of users
cannot be found in the MAC address table.
High Scalability
The S6700 supports the iStack function that allows switches far from each other to form a
stack. A port of the S6700 can be configured as a stack port using a command for flexible
stack deployment. The distance between stacked switches is further increased when the
switches are connected with optical fibers. Compared with a single device, iStack features
powerful expansibility, reliability, and performance. New member switches can be added to a
stack without interrupting services when the system capacity needs to be increased or a
member switch fails. Compared with stacking of chassis-shaped switches, the iStack function
can increase system capacity and port density without restricted by the hardware structure.
Multiple devices in a stack can be considered as one logical device. These switches can be
managed using a single IP address, which greatly reduces system expansion, operation, and
maintenance costs.
Convenient management
The S6700 supports automatic configuration, plug-and-play, deployment using a USB flash
drive, and batch remote upgrade. These capabilities simplify device management and
maintenance and reduce maintenance costs. The S6700 supports SNMPv1/v2c/v3 and
provides flexible methods for managing devices. You can manage the S6700 using the CLI,
Web NMS, Telnet. The NQA function helps users with network planning and upgrades. In
addition, the S6700 supports NTP, SSH v2, HWTACACS, RMON, log hosts, and port-based
traffic statistics. The S6700 supports GVRP, which dynamically distributes, registers, and
propagates VLAN attributes to reduce the manual configuration workloads of network
administrators and ensure correct VLAN configuration.
The S6700 supports MUX VLAN. MUX VLAN isolates Layer 2 traffic between interfaces in
a VLAN. Interfaces in a subordinate separate VLAN can communicate with interfaces in the
principal VLAN but cannot communicate with each other. This function prevents
communication between network devices connected to certain interfaces or interface groups
but allows the devices to communicate with the default gateway. MUX VLAN is usually used
on an enterprise intranet to isolate user interfaces from each other but allow them to
communicate with server interfaces.
The S6700 supports BFD, which provides millisecond-level fault detection for protocols such
as OSPF, IS-IS, VRRP, and PIM to improve network reliability. Complying with IEEE
802.3ah and 802.1ag, the S6700 supports point-to-point Ethernet fault management and can
detect faults in the last mile of an Ethernet link to users. Ethernet OAM improves the Ethernet
network management and maintenance capabilities and ensures a stable network.
Related Content
Support Community
l Introduction to Huawei Fixed Switches
2 Application Scenarios
WAN Internet
Egress router
NE series
Core switch
S9700
Aggregation
switch
S9700
Access
switch
S6700
10 Gbit/s
server
As shown in Figure 2-1, on a data center network, NE routers function as the egress routers;
S9700s function as core and aggregation switches to ensure network security and implement
load balancing by using firewall and load balance service cards.
S6700s function as access switches to provide 10 Gbit/s access. The S6700 uses iStack to
ensure high reliability. When a switch is faulty, the other switch takes over services on the
faulty switch. Eth-Trunk is used to achieve link-level reliability. Reliability protocols such as
STP and VRRP are not required, configuration and maintenance are simplified, and
configuration errors are reduced.
As shown in Figure 2-2, the S6700 is deployed at the aggregation layer of a large-scale
enterprise campus network, helping you built a highly reliable, scalable, and manageable
enterprise campus network.
W AN In te rn e t
DMZ
NMS
W e b E -m a il D N S
S e rv e r S e rv e r S e rv e r
A g g ra g a tio n
L a ye r S 6 7 0 0
A cce ss
L a ye r
A p p lica tio n
S e co sp a ce T S M V o IP V id e o W LAN C a m e ra
co n fe re n ce
On an enterprise network or campus network, the S6700s connect to access switches through
100M/1000M interfaces, provide high performance and large switching capacity, and connect
to core switches through 10GE optical interfaces. The network provides 10 Gbit/s rate for the
backbone layer and 100 Mbit/s access rate for terminals, meeting requirements for high
bandwidth and multi-service.
The S6700 provides SEP and RRPP to implement millisecond-level protection switching.
S6700s form a stack system by using iStack technology to implement the distributed
forwarding structure and fast fault recovery. The stack system increases the number of user
interfaces and improves packet processing capability. The iStack-enabled S6700s can be
managed in a uniform manner to facilitate network management and maintenance.
3 Product Performance
Jumbo frames
Link aggregation
Interface isolation
Default VLAN
Super VLAN
VLAN mapping
Selective QinQ
Feature Description
MUX VLAN
Voice VLAN
Guest VLAN
Port bridge
ARP in a VLAN
Proxy ARP
MSTP
VBST
Feature Description
Monitor Link
Subring
DHCP client
DHCP server
DHCP relay
URPF check
Routing policies
RIPv1/RIPv2
OSPF
BGP
MBGP
IS-IS
Multicast IGMPv1/v2/v3
routing
features PIM-DM
PIM-SM
MSDP
RPF
Feature Description
ND and ND snooping
DHCPv6 snooping
RIPng
DHCPv6 server
DHCPv6 relay
OSPFv3
VRRP6
MLD snooping
Controllable multicast
VLL FRR
VPLS
Feature Description
MPLS L3VPN
Others VRRP
Remote loopback
PQ+DRR
Feature Description
PQ+WRR
SSH1.5/SSH2
Easy-Deploy (client)
Easy-Deploy (commander)
SVF
Feature Description
Energy saving
In-service patching
Portal authentication
Hybrid authentication
ARP security ARP packet rate limiting based on source MAC addresses
ARP anti-spoofing
IP source guard
Feature Description
sFlow
SNMP v1/v2c/v3
Standard MIB
HTTP
RMON2
Jumbo frames
Feature Description
Link aggregation
Interface isolation
Default VLAN
Super VLAN
VLAN mapping
Selective QinQ
MUX VLAN
Voice VLAN
Guest VLAN
Feature Description
Port bridge
ARP in a VLAN
Proxy ARP
MSTP
VBST
Monitor Link
Subring
Feature Description
DHCP client
DHCP server
DHCP relay
URPF check
Routing policies
RIPv1/RIPv2
OSPF
BGP
MBGP
IS-IS
Multicast IGMPv1/v2/v3
routing
features PIM-DM
PIM-SM
MSDP
RPF
ND and ND snooping
DHCPv6 snooping
RIPng
DHCPv6 server
DHCPv6 relay
OSPFv3
VRRP6
Feature Description
MLD snooping
Controllable multicast
VLL FRR
VPLS
MPLS L3VPN
Others VRRP
Remote loopback
Feature Description
PQ+DRR
PQ+WRR
SSH1.5/SSH2
Feature Description
Easy-Deploy (client)
Easy-Deploy (commander)
SVF
Energy saving
In-service patching
Feature Description
Portal authentication
Hybrid authentication
ARP security ARP packet rate limiting based on source MAC addresses
ARP anti-spoofing
IP source guard
sFlow
Feature Description
SNMP v1/v2c/v3
Standard MIB
HTTP
RMON2
Feature Description
Jumbo frames
Link aggregation
Interface isolation
Default VLAN
Feature Description
Super VLAN
VLAN mapping
Selective QinQ
MUX VLAN
Voice VLAN
Guest VLAN
Port bridge
ARP in a VLAN
Proxy ARP
MSTP
VBST
Feature Description
Monitor Link
Subring
DHCP client
DHCP server
DHCP relay
URPF check
Routing policies
RIPv1/RIPv2
OSPF
BGP
MBGP
IS-IS
Feature Description
Multicast IGMPv1/v2/v3
routing
features PIM-DM
PIM-SM
MSDP
RPF
ND and ND snooping
DHCPv6 snooping
RIPng
DHCPv6 server
DHCPv6 relay
OSPFv3
VRRP6
MLD snooping
Controllable multicast
Feature Description
VLL FRR
VPLS
MPLS L3VPN
Others VRRP
Remote loopback
Feature Description
PQ+DRR
PQ+WRR
SSH1.5/SSH2
Easy-Deploy (client)
Easy-Deploy (commander)
Feature Description
Energy saving
In-service patching
Portal authentication
Hybrid authentication
ARP security ARP packet rate limiting based on source MAC addresses
ARP anti-spoofing
Feature Description
IP source guard
sFlow
SNMP v1/v2c/v3
Standard MIB
HTTP
RMON2
Jumbo frames
Link aggregation
Default VLAN
Super VLAN
VLAN mapping
Selective QinQ
MUX VLAN
Voice VLAN
Guest VLAN
Feature Description
Port bridge
ARP in a VLAN
Proxy ARP
MSTP
VBST*
Monitor Link
Feature Description
Subring
DHCP client
DHCP server
DHCP relay
URPF check
Routing policies
RIPv1/RIPv2
OSPF
BGP
MBGP
IS-IS
Multicast IGMPv1/v2/v3
routing
features PIM-DM
PIM-SM
MSDP
RPF
ND and ND snooping
DHCPv6 snooping
RIPng
DHCPv6 server
DHCPv6 relay
Feature Description
OSPFv3
VRRP6
MLD snooping
Controllable multicast
VLL FRR*
VPLS*
MPLS L3VPN*
Feature Description
Others VRRP
Remote loopback
PQ+DRR
PQ+WRR
Feature Description
SSH1.5/SSH2
Easy-Deploy (client)
Easy-Deploy (commander)
Energy saving
In-service patching
Feature Description
Portal authentication
Hybrid authentication
ARP security ARP packet rate limiting based on source MAC addresses
ARP anti-spoofing
IP source guard
Feature Description
sFlow
SNMP v1/v2c/v3
Standard MIB
HTTP
RMON2*
Feature Description
Jumbo frames
Link aggregation
Feature Description
Default VLAN
Super VLAN
VLAN mapping
Selective QinQ
MUX VLAN
Voice VLAN
Guest VLAN
Port bridge
ARP in a VLAN
Feature Description
Proxy ARP
MSTP
Monitor Link
Subring
DHCP client
DHCP server
DHCP relay
URPF check
Routing policies
RIPv1/RIPv2
Feature Description
OSPF
BGP
MBGP
IS-IS
Multicast IGMPv1/v2/v3
routing
features PIM-DM
PIM-SM
MSDP
RPF
ND and ND snooping
DHCPv6 snooping
RIPng
DHCPv6 server
DHCPv6 relay
OSPFv3
VRRP6
MLD snooping
Feature Description
Controllable multicast
Others VRRP
Remote loopback
Feature Description
PQ+DRR
PQ+WRR
SSH1.5/SSH2
Easy-Deploy (client)
Easy-Deploy (commander)
Feature Description
Energy saving
In-service patching
Portal authentication
Hybrid authentication
ARP security ARP packet rate limiting based on source MAC addresses
ARP anti-spoofing
IP source guard
Feature Description
sFlow
SNMP v1/v2c/v3
Standard MIB
HTTP
4 Hardware Information
For the version mappings, appearance and structure, port description, indicator description,
power supply configuration, heat dissipation, and specifications of S6700, see the S6700
Hardware Description - Chassis.
Figure 4-1 shows the logical structure of hardware modules of the switch.
Hardware modules of the S6700 refer to the SCU (Switch Control Unit), power supply, and
fan.
SCU
Switch Module
Interface
Module
Control Module
SCU
The SCU is fixed on the S6700. Each S6700 has one SCU.
The SCU is responsible for packet switching and device management. It integrates multiple
functional modules, namely, the main control module, switching module, and interface
module.
Main Control Module
Power Supply
For details about S6700 power supply configuration, see S6700 Hardware Description -
Power Modules.
Cards
The S6700 supports service cards. Service cards allow flexible networking and provide cost-
effective and customized solutions.
For details about cards supported by the S6700, see S6700 Hardware Description - Cards.
NOTE
Fan Modules
For details about fan modules on different models, see Heat Dissipation in S6700 Hardware
Description - Chassis.
5 References
Log in to Huawei official website, and search for Standard and Protocol Compliance List
to obtain the document.