Professional Documents
Culture Documents
PP67-PE-EXT-CT-DOR-DS-Q-063 - Rev01 - Data Sheet PI-TR-942-potable Water Tank
PP67-PE-EXT-CT-DOR-DS-Q-063 - Rev01 - Data Sheet PI-TR-942-potable Water Tank
PP67-PE-EXT-CT-DOR-DS-Q-063 - Rev01 - Data Sheet PI-TR-942-potable Water Tank
: PP67-PE-PIR-CF-DOR-DS-Q-063
Peru Block 67 Field
Development Revision: 01 Rev Date :13-Jul-2011
WARNING: This document as printed may not be the latest version. Please refer to the electronic file in the EDMS
/conversion/tmp/activity_task_scratch/757754187.doc
Doc. Ref.: PP67-PE-PIR-CF-DOR-DS-Q-063
Peru Block 67 Field
Development Revision: 01 Rev Date :13-Jul-2011
12 DESIGN DATA
13 Design pressure mbarg Full of water Operating pressure range barg ATM
14 Design vacuum mbarg NA Hydrotest pressure mbarg (6)
15 Design metal temperature (min) °C 18 Product height (design) mm 7 310
16 Design metal temperature °C 43 Design liquid specific gravity @ T - 1
17 Operating temperature range °C AMB Inlet pumping rate m³/h 5
18 Outlet pumping rate m³/h 30
19 Wind Design As per code Foundation design By VENDOR
20 Wind speed m/s 19 (11) Foundation construction By CONTRACTOR
21 Wind pressure kg/m² As per code Sour service NO
22 Roof live load (uniform) kg/m² 112 Lethal service NO
23 Corrosion Allowance mm 3 Cyclic service NO
24 Earthquake design See (11) Sand Jet NO
25 Insulation design NO Blast overpressure NO
26
27 OPERATING DATA
28 Density Flowrate Temperature (°C) Pressure (Barg)
29 kg/m³ 3
m /h Minimum Normal Maximum Minimum Normal Maximum
WARNING: This document as printed may not be the latest version. Please refer to the electronic file in the EDMS
/conversion/tmp/activity_task_scratch/757754187.doc
Doc. Ref.: PP67-PE-PIR-CF-DOR-DS-Q-063
Peru Block 67 Field
Development Revision: 01 Rev Date :13-Jul-2011
17 CONSTRUCTION DETAILS
18 Non Destructive Testing Anchor bolt-no off & size 20 x M16 (7)
19 Radiography (4) Bolt circle diameter 4 780 (7)
20 Ultrasonic (4) External painting Yes, see (9)
21 Magnetic particle (4) Internal coating/lining Yes,see (9)
22 Dye penetrant (4) Pickling & Passivating All stainless steel parts
23 Soapy water (4) Inspection (4)
24 Post weld heat treatment (PWHT) (4)
25 Foundation type Concrete
26 Number Of Shell Courses nb 4 (7) Roof to shell joint Frangible
27 Shell courses thickness-bottom mm 8 (7) External roof type design (7) Fixed roof
28 Shell courses thickness mm 8 (7) Angle of the cone 15°
29 Shell courses thickness mm 6.35 (7) Internal floating roof type NA
30 Shell courses thickness mm 6.35 (7)
31 Shell courses thickness mm NA
32 Shell courses thickness mm NA
33 Top girder thickness mm NA
34 Bottom thickness mm 8 (7) Test water supplied by VENDOR
35 Bottom slope (up to bottom drain) - YES, 1 % Insulation NO
36 Bottom annular plate width mm 150 (7) Insulation thickness NA
37 Bottom annular plate thickness mm 21 (7) Fireproofing NO
38 Roof thickness mm 6.35 (7) Fireproofing thickness NA
39 Weight-Full of water kg 141 000 (7)
WARNING: This document as printed may not be the latest version. Please refer to the electronic file in the EDMS
/conversion/tmp/activity_task_scratch/757754187.doc
Doc. Ref.: PP67-PE-PIR-CF-DOR-DS-Q-063
Peru Block 67 Field
Development Revision: 01 Rev Date :13-Jul-2011
WARNING: This document as printed may not be the latest version. Please refer to the electronic file in the EDMS
/conversion/tmp/activity_task_scratch/757754187.doc
Doc. Ref.: PP67-PE-PIR-CF-DOR-DS-Q-063
Peru Block 67 Field
Development Revision: 01 Rev Date :13-Jul-2011
NOZZLE TABLE
N O ZZLE N E C K FLA N G E S R E IN F.
MARK D E S IG N A TIO N
D IA M E TE R TH IC K . /C . LIN E N O M IN A L D I. TY P E C LA S . FA C E TH K . x W ID E
D D rain NPS 2 8.74 2600 NPS 2 WN 150 RF 10 x100
LT1 Level transm itter NPS 3 11.13 2600 NPS 3 WN 150 RF 10 x100
S V ent w ith arrestor NPS 2 8.74 200 NPS 2 WN 150 RF
A1 From filters NPS 2 8.74 2600 NPS 2 WN 150 RF 12 x200
B2 O verflow NPS 3 11.13 2600 NPS 3 WN 150 RF 12 x130
B1 O utlet to pum ps NPS 4 11.13 2600 NPS 4 WN 150 RF 10 x80
M Flush clean door 24x36 N P S 36 15.88 2600 N P S 36 WN 150 RF 8 x120
LT3 Level transm itter NPS 3 11.13 2600 NPS 3 WN 150 RF 10 x100
G G auging hatch NPS 8 12.7 200 NPS 8 WN 150 RF 10 x100
G1 Level gauge NPS 3 11.13 2600 NPS 2 WN 150 RF 10 x100
G2 Level gauge NPS 3 11.13 2600 NPS 2 WN 150 RF 10 x100
WARNING: This document as printed may not be the latest version. Please refer to the electronic file in the EDMS
/conversion/tmp/activity_task_scratch/757754187.doc
Doc. Ref.: PP67-PE-PIR-CF-DOR-DS-Q-063
Peru Block 67 Field
Development Revision: 01 Rev Date :13-Jul-2011
30.13
7835
S
ID 400 30.13
Thk 6.35 7675
G
7310
Thk 6.35 WL HLL
7000
6750 B2 G2
ID 4711
Thk 6.35 WL
ID 4711
Thk 6.35
4500
WL
8038.6
ID 4708
Thk 8
2250
B O LT CIRCLE 4780 WL
FLA T HE A D
O .D. 4708
Thk 6.2 ID 4708
Thk 8 460
M
RE F 0.00
300
ID 4624 LT3 B1 A1
Thk 8 -20
A NC
200
20 B O LTS DIA 16 G1 LT1
O FF A X IS
150
D
WARNING: This document as printed may not be the latest version. Please refer to the electronic file in the EDMS
/conversion/tmp/activity_task_scratch/757754187.doc
Doc. Ref.: PP67-PE-PIR-CF-DOR-DS-Q-063
Peru Block 67 Field
Development Revision: 01 Rev Date :13-Jul-2011
Location
Tag
Platform Definition.(23)
WARNING: This document as printed may not be the latest version. Please refer to the electronic file in the EDMS
/conversion/tmp/activity_task_scratch/757754187.doc
Doc. Ref.: PP67-PE-PIR-CF-DOR-DS-Q-063
Peru Block 67 Field
Development Revision: 01 Rev Date :13-Jul-2011
NOTES:
(1) External bolting to be zinc plated / bichromate treated
(2) Non CAF flat gaskets, 2mm thick up to 14” and 3mm above or Spiral wound 316L PTFE filler 4mm thick, 3.2mm thick 316L SS winding internal and
external centering rings per ASME B16.20
(3) Piping to safe location by OTHERS. VENDOR to supply flame arrestor.
(4) As per code
(5) All internals shall be removable through the manholes
Minimum thickness of internals to be defined by VENDOR
(6) Full of water or as per VENDOR's Standard. The most stringent shall apply.
(7) To be indicated / calculated / confirmed by VENDOR
(8) As per relevant standard in PP67-PE-GEN-00-DOR-DW-Q-030 Standards drawings for accessories and equipment of vessels
(9) As per PP67-PE-GEN-00-DOR-SP-R-001 “Painting Specification “
(10) NA
(11) Tank must be designed to withstand the design conditions during operation specified in PP67-PE-GEN-00-DOR-SP-O-100 “Equipment Design
Conditions”
(19) : NA
(20) – Circumferential seams and weld lines when indicated on tank sketches are only for information and remain on VENDOR responsibility.
(21) : Reinforcement : the given figures are only for information and remain on VENDOR responsibility.
All given thicknesses are indicative only, subject to calculation verification by VENDOR. Thickness of pad reinforcement shall not exceed 1.5*shell or head
THICK : Thickness, mm
(22) : /C.LINE : for a nozzle located on the head, this figure is the length from the face of the nozzle to the TL, mm
(23) : Access plat-forms and stairs shall be supported by the tank, size and location to be confirmed BY VENDOR.
VENDOR to check the local loads on tank induced by platforms and stairs.
Assumed weight of the platforms and stairs, (3 000 kg) is not included within actual weights, but used for Foundation loads calculations.
(24) : Tank dimensions are based on a 750 bbls standard potable water tank, i.e 15 ft-6 in diameter and 24 ft height.
WARNING: This document as printed may not be the latest version. Please refer to the electronic file in the EDMS
/conversion/tmp/activity_task_scratch/757754187.doc
Doc. Ref.: PP67-PE-PIR-CF-DOR-DS-Q-063
Peru Block 67 Field
Development Revision: 01 Rev Date :13-Jul-2011
WARNING: This document as printed may not be the latest version. Please refer to the electronic file in the EDMS
/conversion/tmp/activity_task_scratch/757754187.doc
Doc. Ref.: PP67-PE-PIR-CF-DOR-DS-Q-063
Peru Block 67 Field
Development Revision: 01 Rev Date :13-Jul-2011
180 N 0
90
M 180
160
B1
150
A1
130
120
L T1 110
L T3 90
G1
D
G
S E C TIO N B E TW E E N E L =0 A N D E L = 2 0 0 9 .6
N O Z Z LE O R IE N T A T IO N
270
S C A L E = 1 /5 2 .5
180 N 0
90
110
90
G2
B2
S E C TIO N B E TW E E N E L =6 0 2 8 .9 A N D E L =8 0 3 8 .6
WARNING: This document as printed may not be the latest version. Please refer to the electronic file in the EDMS
/conversion/tmp/activity_task_scratch/757754187.doc