Professional Documents
Culture Documents
ED6 Manual en 230113
ED6 Manual en 230113
output
HANYOUNGNUX CO.,LTD
INSTRUCTION MANUAL 28, Gilpa-ro 71beon-gil, Michuhol-gu,
Incheon, Korea TEL : +82-32-876-4697
http://www.hanyoungnux.com Increase
Thank you for purchasing Hanyoung Nux products. Please read the instruction
Setting Decrease
manual carefully before using this product, and use the product correctly.
▍Suffix code
does not exceed one million times.
Model Code Description • In current temperature condition, press key for 3sec, move key to . and then change the setting to
ED6- ⃞ ⃞ ⃞ ⃞ ⃞ Digital temperature controller key. lastly, save them with key.
Control type F Proportional or ON/OFF control (use parameter setting) •[ ]→[ ]→[ ] (0 ~ 240 sec)
K Thermocouple K
Input P RTD Pt 100 Ω (IEC)
C 4 - 20 mA d.c. (As external resistance 250Ω attached), 1 - 5 V d.c. ■ Operating by delay-timer Relay OFF Relay ON
M Relay
Control output
S SSR (voltage pulse output 10 V d.c. and more than ) ① Delay time dLy = 0,
A Alarm or defrost timer
Option
N NONE ② Delay time dLy = 5, 0S 5S 10S 15S 20S
P3 10 - 24 V d.c.
Power supply voltage
P4 100 - 240 V a.c. 50/60 Hz
▍Specification
Relay OFF Relay ON
Weight 116 g
Timer output : ton = 5 min, toff = 15 min
• Under MOC"1" setting, main output automatically turns OFF if timer is turned ON.
• Using MOC function, you can effectively use timer output as a defrost function.
※ This function works only under ON/OFF control.
▍Output capacity and set value verification mode
※ As proportional control operating, it displays current output capacity (0 ~ 100%).
※ PorF='0' when setting P Present • Once Offset occuring, Eliminate M.R. value reffering to current output capacity.
Temperature
(Proportional Control)
Heating Control MODE Cooling Control MODE
˙Output Capacity (%) ˙Set Value (SV) PV < SV : Increase M.R value PV > SV: Increase M.R value
flickering for 1 sec
flickering for 1 sec
PV > SV : Decrease M.R value PV < SV: Decrease M.R value
Present
Temperature ※ PV : Present Value ※SV : Setting Value ※M.R : Offset Elimination
Symbol
Current Current category Description Display Default
temperature temperature
※As porF='0'P setting (proportional control) (PV)
Temperature
Temperature setting(SV) K, Pt 100 1 ~ 100 ℃
(Save)
setting (SV) Proportional
Pb PORF = 0 10 ℃
band setting
●
SV change
(Save)
1-5V 1 ~ (H-SC - L-SC)
Offset removal(M.R)
(Save)
Current MR manual reset 0 ~ 100 PORF = 0 50 %
temperature
Current (Save)
temperature
Current
temperature
Delay-time
5. Lower limit 2.DLY 0 ~ 240 sec Always 0 sec
(Default set value display) (setting range)
setting
- 30.0 ~ 30.0 ℃ (TRSL = 0)
K, Pt 100 K, Pt100 : 0.0℃
- 30 ~ 30 ℃ (TRSL = 1)
3.RST manual reset Always 1-5V : 0
1-5V - 300 ~ 300
(Save)
TSL ~ 999.9 ℃ (TRSL = 0)
Cooling Heating K
TSL ~ 999 ℃ (TRSL = 1)
mode mode
K : 999.9 ℃
6. Auxiliary Upper limit TSL ~ 400.0 ℃ (TRSL = 0)
output option setting 4.TSH Pt 100 Always Pt 100 : 400.0 ℃
(setting range) TSL ~ 400 ℃ (TRSL = 1)
1 - 5 V : 5000
※ Default : 0
1-5V TSL ~ H-SC
Auxiliary output
6.SAO 0 : Alarm setting, 1 : Timer setting Always 0
option
- 80.0 ~ 999.9 ℃ (TRSL = 0)
(Save) (Save) (Save) K
- 80 ~ 999 ℃ (TRSL = 1)
Alarm K : 999.9 ℃
- 100.0 ~ 400.0 ℃ (TRSL = 0)
7.ATS temperature Pt 100 SAO = 0 Pt 100 : 400.0 ℃
- 100 ~ 400 ℃ (TRSL = 1)
2. Delay time 8. Variation setting for 8. OFF time setting
setting 1 - 5 V : 5000
setting alarm
1-5V L-SH ~ H-SC
Alarm-delay time
3. Input compensation 9. Delay time setting 9. Main output 9.ADL 0 ~ 240 sec SAO = 0 0 sec
for alarm control
setting
Main output
※Only available as porF=1(under ON/OFF control) 9.MOC 0 : output control release, 1 : Output control SAO = 1 0
control
Symbol
category Description Display Default
Current Decimal point Decimal point (PV)
temperature display setting display setting
(resolution) (resolution)
unlock
Press the key for LOCK SV lock setting 0 : Unlock, 1 : Lock Always 0
at least 3 sec.
(Save)
control type
setting
0~1
0.1 ℃ 1℃
resolution resolution High scale
K, Pt 100 (0 : Decimal point display,
Press both of two keys
for at least 3 sec. 1 : No Decimal point display X)
Decimal point
at the same time TRSL Always 0
(Save) setting
Lock setting 0~2
1-5V (0 : decimal point location)
(Save)
Control setting Ex) 0 : 200, 1 : 20.0, 2 : 2.00
Unlock Lock
1-5V
Low scale H-SC High scale L-SC ~ 5000 5000
(ED6-FC type)
1-5V
Proportional ON/OFF L-SC Low scale -1000 ~ H-SC -1000
(Save) control control (ED6-FC type)
(Save)
Current
temperature