Professional Documents
Culture Documents
Test Mec.4
Test Mec.4
Test Mec.4
Company:
Category: Mechanical
Date:
Assessment Number:
Candidate Name:
The following pages contain questions relating to the particular job skill, these
questions are supplied with expected answers and are delivered Orally
Some questions are for information and to settle the candidate i.e.
Assessment Number:
Q2 The diameter of the inlet and the exhaust valves of a naturally aspirated
four stroke diesel engine are normally different, which one has the largest
diameter.
A2 Inlet valve.
Q3 On some single stage centrifugal pumps, holes are drilled on the back of
the impeller opposite the suction eye. Explain in your own words why these
holes are present.
Q4 Why are some large single stage centrifugal pumps fitted with a double
volute section casing?
Q5 In a three stage reciprocating compressor, the cylinder with the largest diameter
would supply energy to the gas/air, on the last stage, first stage, or second stage.
A5 First stage.
A6 Smaller.
Assessment Number:
A7 Piston compression rings, Oil control ring and Oil scraper/wiper ring.
Q10 On a double acting hydraulic cylinder, which end of the piston will
generate more force; the Rod end or the Cap end?