Professional Documents
Culture Documents
Adi Statie Lipit Weller-Wecp-20
Adi Statie Lipit Weller-Wecp-20
com Share on Join this site Edit History Tags Source Explore »
Tervetuloa Welcome
English pages Weller Wecp 20
Forum eli keskustelut
Viimeiset keskustelut Weller WECP-20 is adjustable soldering iron.
Mikä Wiki on ?
Sivujen muokkaus ?
Kuinka liityn jäseneksi?
Jäsenet
Muutokset
Kaikki sivut
Oma sivulinkit lista
Site Manager
Page tags
koe
new page
Kuinka liittyä ?
Jäsenet
Analogue temperature regulation is carried out using a potentiometer which can be used to set the temperature continuously in a range of 50 to 450 degrees Celsius. A green LED indicates the status of the regulation.
English PDF manual: (click the picture)
or
http://www.artisantg.com/info/PDF__57656C6C65725F5745435032305F44617461736865657432.pdf
https://www.aliexpress.com/item/1005005623832147.html?spm=a2g0o.productlist.main.9.2c997ea5wGFVdK&algo_pvid=63a60ef5-3c9f-400c-a80c-5ca25f7e8764&aem_p4p_detail=202312290543541998974097779700001405831&algo_exp_id=63a60ef5-3c9f-400c-a80c-
5ca25f7e8764-
4&pdp_npi=4%40dis%21EUR%2116.39%215.75%21%21%21125.79%21%21%402103080c17038574341075616e3740%2112000033826061946%21sea%21FI%21136402714%21&curPageLogUid=NfzGelIx8ePW&search_p4p_id=202312290543541998974097779700001405831_5
Then there is an adater from LT/ET. All LT-series tip will got to ET-series solder lin WECP-20.
This adapter costs about 20 euros. Tips cost about 5-7e.
This a tool 10311 for Weller WECP-20 costs about 5-6 euros
=========
24.9.2016 Well ,not any more. The tip stopped to heat. When I move the connetion to Weller, it started to work again.
I open the Weller and tried to find a bad connection, but I didn't find anything.
I put Weller back in service. Let see if it will do same again.
I took a picture and put on top of this page.
Vit Vaculik from Czech Republic has done PCB for WECP-20 2.8.2015
and
and pcbs
http://remotesmart.wikidot.com/local--files/weller-wecp-20/Weller_wecp-20pcb.brd
' ====================
' ====================
' ===========================
' ====================
' ===========================================
WECP-20 heat sensor
PTC 22ohmia
50 24,65
60 25,50
70 26,33
80 27,16
90 28,00
100 28,82
110 29,61
120 30,43
130 31,31
140 32,14
150 32,94
160 33,74
170 34,55
180 35,41
190 36,19
200 36,96
210 37,75
220 38,53
240 40,12
250 40,88
260 41,67
270 42,40
280 43,17
290 43,94
300 44,69
310 45,45
320 46,25
330 46,95
340 47,74
350 48,47
360 49,26
370 49,95
380 50,69
390 51,39
400 52,11
410 52,82
420 53,62
430 54,38
440 55,12
450 55,86
It is available https://fi.farnell.com/vishay/ptccl09h171hbe/thermistor-ptc-22r-20-radial/dp/1187083?st=ptc%2022
Price 1.76e
Service manual
The output pin 1 was 4.6V when the heater was off and 0.03V when the heater was on.
28.5.2022
The Weller has been working well after repair. but I have bought many Chinese soldiers
I also bought separate heater resistors and I have used them.
It is thyristor controller.
==
In 23.2.2023 one French engineer write to me and asked help to made Wecp-20 PCB board.
I have had this Vit Vaculik Eagle made files about ten years, but it doesn't was enough for him.
So I did a new schematic diagram so that better suits for PCB design. I did net list and open my WECP-20 tool and measure PCB size.
WECP-20a.jpg
[http://remotesmart.wikidot.com/weller-wecp-20/weller.zip]
Ask help.
4.3.2023 One of Italian radio amateur took this file and send to the JBLPCB.
Let see what he has got.
11.3.2023
One Italian guy has a problem with 22 ohm PTC resistor
I try to explain how of it works
The PTC resistor changed its ohms value according the temperature from 25C to 400C from 22ohm to 400 ohms
Pins 2 and 3 should be about the same, when the PTC resistor has heated to right temperature.
https://www.tme.eu/en/details/en2p5m26/switchcraft-connectors/switchcraft/
Pekka OH3GDO
oh3gdo@gmail.com
page revision: 168, last edited: 29 Dec 2023, 13:44 (44 days ago)
Edit Tags History Files Print Site tools + Options
Powered by Wikidot.com Help | Terms of Service | Privacy | Report a bug | Flag as objectionable
Unless otherwise stated, the content of this page is licensed under Creative Commons Attribution-ShareAlike 3.0 License