Professional Documents
Culture Documents
A2讲义习题 (44) -Equilibrium of a rigid body under coplanar forces
A2讲义习题 (44) -Equilibrium of a rigid body under coplanar forces
1. A uniform rod AB of length 2m and weight 20N rests horizontally on smooth supports at A
and B. A load of 10N is attached to the rod at a distance 0.4m from A. Find the forces exerted
on the rod by the supports.
2. A uniform plank AB of weight 100N and length 4m lies on a horizontal roof, perpendicular to
the edge of the roof and overhanging by 1.5m. If a load of 200N is to be attached to the
overhanging end A, what force must be applied at the opposite end B just to prevent the plank
from overturning?
3. A uniform rod AB of weight W is hinged to a fixed point at A. It is held in a horizontal
position by a string, one end of which is attached to B and the other end to a fixed point C
such that angle ABC is 30°. Find, in terms of W, the tension in the string
4. A non-uniform rod AB of length 2m is suspended in a horizontal position by two vertical
strings, one at each end. The weight of the rod acts at G where AG=1.1m and is of magnitude
60N. A load of 20N is placed on the rod at a variable point P. If either string snaps when the
tension in it exceeds 42N, find the section of the rod in which P can lie.
5. A rod AB rests with the end A on rough horizontal ground and the end B against a smooth
vertical wall. The rod is uniform and of weight W. A mass also of weigh W is attached at B. If
the coefficient of friction at A is find the angle at which the rod is inclined to the vertical
horizontal ground, the coefficient of friction at both points of contact being . The ladder is
uniform and weighs 300N. Find the normal reaction at the wall and the angle which the
ladder makes with the horizontal.
8. O is the center of a circular disc of weight W which rests in a vertical plane on two rough pegs
A and B, the coefficient of friction with each being 0.5. AO makes 60°and B0 makes
30°with the vertical. Find, in terms of W, the maximum force which can be
applied tangentially at the highest point of the disc without causing
rotation in the sense from A to B
9. A uniform rod AB of weight 200N is lying on rough horizontal ground when a string attached
to B begins to lift that end of the rod. When AB is inclined at 30°to the ground the end
A is about to slip. If at this instant the string is inclined to the
vertical at 30°calculate the tension in the string and the angle of
friction between the rod and the ground.