Professional Documents
Culture Documents
Solar ALL in ONE 40W Philips
Solar ALL in ONE 40W Philips
Solar ALL in ONE 40W Philips
Hrs 12
if battery is full charged)
Use of Motion Sensor for Dimming No
LED Current Tolerance ± 5%
LED Driver Input Wattage Tolerance ± 10%
>90%
Dimming Timing Tolerance 10% of Set Time.
Standby Leakage Current form Battery in
10 mA
Standby Under Voltage
Operation Leakage Current form Battery when CC in
1 mA
hibernation mode set by Remote
Product Details
Type Solar All in One 40W
LED Indication in Luminaire Mono Type
3 Red LED indications
but not visible outside of
luminaire.
battery discharge
Note: *Battery Thresholds may vary depending upon wire size, length of wire and the current
** Individual products may deviate slightly from the specifications, figures and wattage stated herein.
Such deviation will not materially affect product functionality and will be within the tolerance limit of
the International Electrotechnical Commission and National Standardization Body standards.
Hibernation and Wake-Up
Enter hibernation:
external controlled devices, and enters into hibernation status with extremely low power in order to
avoid power supply consumption of lithium battery during transportation or no use condition.
Hibernation Wake-UP:
WHEN the controller is hibernated, the PV panel is connected, and the PV charge condition is met
during the day, the controller will be woken up to charge. When charge time is more than 30 minutes,
load will be automatically turn ON at night. But if the charging time is less than 30 minutes, the light
will not turn ON at night and the controller will continue to remain in hibernation mode.