Professional Documents
Culture Documents
Trunnion
Trunnion
Tube mill
Concentricity measurement at end wall
trunnion Place: Date:
Measurement record
C D
I
A B
II VIII
x
III VII
IV VI
V
Excel table
Mill shell-Ø mm Distance of dial gauges (x) mm
Measured value before repair (enter reading value at dial gauge x 100) Radial runout
I II III IV V VI VII VIII I (mm)
Dial gauge A +/- 0,00
Dial gauge B +/- 0,00
Dial gauge C +/- 0,00
Dial gauge D +/- 0,00
Measured value after repair (enter reading value at dial gauge x 100) Radial runout
I II III IV V VI VII VIII I (mm)
Dial gauge A +/- 0,00
Dial gauge B +/- 0,00
Dial gauge C +/- 0,00
Dial gauge D +/- 0,00
Dial gauge A before rep. Dial gauge B before rep. Dial gauge C before rep. Dial gauge D before rep.
Dial gauge A after rep. Dial gauge B after rep. Dial gauge C after rep. Dial gauge D after rep.
0,80 0,80
0,60 0,60
0,40 0,40
0,20 0,20
0,00 0,00
I II III IV V VI VII VIII I I II III IV V VI VII VIII I
Measuring point Measuring point
TKIS Client
Signature Signature
TM.04en Vs 01 Page 1