Raw Materials Specifications Material Description Specification Comply Clean, Natural, Solid, Graded, Free from SASO 1246, ASTM C33, C241 & Sand Clay & Alluvial Silt & Organic Impurities. BS EN 12620 √ Clean, Natural, Free from Clay & Dust & SASO 378, ASTM C33 & BS EN Aggregates Organic Impurities. 12620 √ Clean, Free from Excess Salt & Organic SASO 1246, ASTM C1602,3 & BS Water Impurities & Deleterious Matters. EN 3148 √ [CEM 1, 52.5N] Must meets the physical SASO-GSO 143 1979, Cement & chemical properties of the standards. ASTM C150 & BS EN 197-1:2011 √ Synthetic Iron Oxide, Homogenous & SASO 1246, ASTM C33 & BS EN Pigments confirming to the applied standards. 12620 √ Steel Rod Reinforced Carbon-Steel Bar (Rebar). ASTM A615 / A615M - 18e1 √ Admixture All Types A,B,C,D,F,G ASTM C494 / C494M - 99a √ Dimensions & Allowable Tolerance Clause Dimension Tolerance ± Specification Comply Width 90 cm ± 6 mm PCI MNL-135 √ Hight 75 cm ± 6 mm PCI MNL-135 √ Length 180 cm ± 6 mm PCI MNL-135 √ Inner Dia. --- ± 6 mm PCI MNL-135 √ Outer Dia. --- ± 6 mm PCI MNL-135 √ Physical Properties Compressive Strength 30 N/mm2 Cube Flexural Strength 4 N/mm2 Water Absorption 6% Weight Approx. 570 Kg / Pcs Abrasion Resistance 3 mm Density Approx. 2250 Kg / m3 Handling, Storage and Delivery: 1. Handling: Precast concrete units shall be handled and transported in a manner to minimize damage. Lifting devices or holes shall be consistent with industry standards. Lifting shall be accomplished with methods or devices intended for this purpose as indicated on shop drawings. Upon request, the precast concrete producer shall provide documentation on acceptable handling methods for the product. 2. Storage: Precast concrete units shall be stored in a manner that will minimize potential damage. 3. Delivery: Precast concrete units shall be delivered to the site in accordance with the delivery schedule to avoid excessive build-up of units in storage at the site. Upon delivery to the jobsite all precast concrete units shall be inspected by the customer or customer’s agent for quality and final acceptance. 4. Final Acceptance: Upon final acceptance, the customer or customer’s agent acknowledges and understands the appropriate methods for handling the accepted precast concrete unit(s). Upon acceptance by the customer or customer’s agent, the precast concrete manufacture (Al Sarif Co.) is not responsible for replacing damaged product resulting from improper handling practices on the job site.
AL SARIF FACTORY FOR CONCRETE PRODUCTS – RIYADH 2ND INDUSTRIAL AREA. [QA/QC DEPARTMENT] TEL#: 2650919 1