Professional Documents
Culture Documents
All About Mechanical Couplers - Structural Guide
All About Mechanical Couplers - Structural Guide
easiness of understanding.
Element designs with notes and discussions have added to get comprehensive knowledge. Also, construction materials, shoring system
design, water retaining structures, crack width calculations, etc. have discussed in addition to other aspects.
Home PDF Spreadsheets Download So wares Online Footing design Online Beam Design About Us
NEXT STORY
Mechanical couplers are widely used in the present construction industry to joint two reinforcement bars together.
► Bridge (3) The lapping of reinforcement is very di icult and time-consuming. Further, some costs also can be saved with
► Construction (21) mechanical couplers. In addition, it is a saving of materials and very useful in the areas where the reinforcement is
► Design (18) congested.
»
and construction
Types of Beams
Different Types of Mechanical Couplers
» Types of Concrete Blocks
Mainly there are two types of couplers for rebar.
» Types of Concrete Joints [ A Detailed
Study] 1. Tension Couplers
» Welding Inspection - What it is and How it
2. Compression Couplers
done
► Design Loads (5) Mainly the couplers are used to carry the tensile force. However, they are using to carry the compressive forces.
► Design to BS 5950 (4) Further, most of the time, couplers are tested for tension.
► Design to BS 8110 (13)
► Design to EC2 (12) The following figure indicates the di erent types of couplers available in the construction industry.
► Design to EC3 (5)
► Foundation Design (38)
► Geotechnical Design (12)
► Materials (46)
► Post Tension (2)
► Retaining Structures (11)
► Seismic Design (8)
► Servisibility Design (17)
► Special Designs (25)
► Structural Detaling (14)
► Structural Failures (5)
► Testing (13)
There are seven types of couplers that can be used to connect the reinforcements.
Each of those types can be applied in the construction based on the application and as per the need of the
construction.
The following figure indicates the actual arrangement of the copper at the site. These steel couplers making the
construction easier. Further, when the couplers are installed at the site, they are staggered to avoid any weak
joints.
These couplers can be used for beams, slabs, columns, shear links, etc. The application shall be as approved by
the engineer at the site or as per the recommendation of the structural engineer.
There are di erent standards/guidelines such as Report by ACI committee 439, BS 8597:2015, etc can be used for
the design and construction.
Further, testing shall also be done as per the guidelines before the construction. Mainly the tensile strength is
tested.
Rebar Weight | per m per foot Compressive Strength of Concrete Control Joints in Concrete [a deep
and Concrete Testing study]
Construction Design Loads Design to BS 5950 How to Find Depth of Footing | What to Considered
Designed by KitS