Professional Documents
Culture Documents
JSA 08 Gas Welding
JSA 08 Gas Welding
PERSONAL PROTECTIVE EQUIPMENT & TOOLS: Hard Hat, Safety Shoes, Apron, Welding Hood, Safety Goggles, Hand
Gloves, Multi Gas Detector,
SEQUENCE
Yes /
OF BASIC JOB POTENTIAL HAZARDS PRECAUTIONS
No
STEPS
Ensure the worksite is free from flammable / toxic vapor
Presence of flammable / toxic
or liquid by safe preparation (isolation, depressurizing,
Vapor or Liquid
draining, venting, flushing, purging as required)
The entry of non – certified equipment (Gas Cylinder
Banks, Crane, Vehicles etc) to be authorized under
Fire & Explosion Permit to Work System.
Keep the fire extinguishers & fire hoses in ready
Planning condition.
Non – compliance of KOC F & S Refer Chapter -16 KOC F& S Regulations, HSEMS
Regulations and HSE MS Procedures - Doc. No. SA.KOC.021 ‘Welding &
Procedure Cutting’; Doc. No. SA.KOC.004 “Permit to Work”.
Unintended Shutdown of Facility /
Identify the safety override required for the work.
Equipment
Take a Hot Work Permit and other associated permits
Unauthorized Work
from Asset Owner.
Ensure the gas cutting equipment (blowpipe, hoses,
Defective Tools oxy-acetylene cylinders, pressure gauge) are free from
defect .
Radiation from Welding Flame /
Wear protective goggles & Clothing.
Rays (Flash Eye)
Ensure proper ventilation and fume extraction
Exposure to Welding Fumes
equipment in case of welding inside an enclosure
Cutting / Wear long sleeved coverall, leather apron; welder’s
Welding Burns
hood.
Falling of Sparks Enclose the welding area through tarpaulin.
Additional
Hazards
(Other than
indicated above)
Name: Designation:
KOC / ID. No. Company:
JSA Done By
Controlling Team: Contract No .(If Applicable):
Signature: Date: