Professional Documents
Culture Documents
StarIndustries Forks Extensions
StarIndustries Forks Extensions
StarIndustries Forks Extensions
SECTION
FORKLIFT ATTACHMENTS MODEL #
MANUFACTURED IN
NORTH AMERICA
PRODUCT
NAME
FORK
EXTENSIONS
1 Local manufacturing.
All forks are manufactured
in North America and
3 Certified production
methods.
Welding processes are
5 Full part traceability.
Each fork is stamped with manufacturer's
identification, specified capacity and
only from high-grade certified in accordance load centre, week of manufacture and
certified materials. with ISO 3834-2. production works order number.
2 No shortcuts.
All forks are forged from
a single piece of steel, then
4 Rigorous testing.
Fork heels and welds
are subjected to full MPI
6 Standards-compliance.
All forks are guaranteed to meet or
exceed the requirements of the national
fully heat-treated, quenched crack-testing on all welds and (such as IS02328 and IS02330 and ANSI
and tempered for a minimum and the heel area by ITSDF B56.11.4) with regards to mounting
yield strength of 825 Mpa. certificated operatives. details, load-, fatigue- and impact-tests.
FEATURES
Overall length of fork extension Do not pick up load with
must not exceed 150% of fork length. tip of fork extensions.
Inside width of fork extension must Load must be centered
not be more than ½" wider than fork. on fork extensions or
closer to the backstop.
Forklift capacity is substantially reduced
when center of load is moved out
beyond standard 2 ft. load center.
SPECIFICATIONS
Model Overall length Fits Forks Weight per set