Professional Documents
Culture Documents
Aviation Radio Frequencies Australia
Aviation Radio Frequencies Australia
1. Push [CLR] and use the Up/Down arrow keys to set the frequency
2. Push [CLR] and use the digit keypad to input the frequency
• Push [MR], [FUNC], (3)[BANK], then use the Up/Down arrow keys or appropriate digit key to
select a memory bank number, then press [ENT]
• Use the Up/Down arrow keys or 2 appropriate digit keys to select a memory channel, then
press [ENT]
Lock Function
The lock function prevents accidental frequency changes or function activation. Push the key symbol
button on top of the transceiver to activate, and press again and hold for 2 seconds to deactivate.
Number Pronunciation
0 ZE-RO 5 FIFE DECIMAL DAY SEE MAL
1 WUN 6 SIX HUNDRED HUN dred
2 TOO 7 SEV en THOUSAND TOU SAND
3 TREE 8 AIT
4 FOWer 9 NINer
CH Frequency Description
1 118.3 TWR Willy Tower (Williamtown AFB civilian channel)
2 118.4 DEP WST Sydney Departures W
3 118.5 Melbourne Centre - Sydney South
4 120.5 TWR Sydney Tower 1 - Rwys 16L/34R
5 120.8 CTAF - Victor 1 Sydney Coastal & Sydney Harbour R405A/R405B
6 123.0 DPP NTH Sydney Departures N & E
7 124.4 APP NTH Sydney Approach N BTN 45NM N & 10 NM S
8 124.7 TWR Sydney Tower 2 - Rwys 16R/34L & 7/25
9 125.3 DIR EST Sydney Director E
10 125.7 Brisbane Centre - Sydney North
11 126.1 DIR WST Sydney Director W
12 126.7 CTAF - Common Traffic Advisory Frequency for non-towered aerodromes
13 128.3 APP STH Sydney Approach S BTN 45NM S & 10 NM N
14 129.7 DPP STH Sydney Departures S, W & NW
15 130.35 ACD Willy Clearance Delivery + Inland & Coastal GA routes
16 132.5 TWR Bankstown Tower
17 135.1 TERMINAL Sydney Terminal
18 135.5 TWR Richmond Tower
19 135.7 APP Willy Approach
20 135.9 APP WST Sydney Approach W
• Press [Fav] button several times until the AIR Service bank indicator is displayed
• If the HOLD indicator is displayed, press the [Hold] button to start scanning air frequencies
(HOLD indicator not displayed)
• When the desired frequency is found press the [Hold] button to pause scanning. If
necessary use the [Up] or [Down] arrow buttons to select the exact frequency
• Press & hold the [Store] button
• If necessary use the [Up] or [Down] arrow buttons to select the desired favourites channel
in which to store the frequency
• Press & hold the [Store] button to store the frequency
Tower -> Departures -> Brisbane/Melbourne Centre -> Approach -> (Director ->) Tower
Camden (YSCN):
Brisbane (YBBN) R/W 01 North to South, R/W 19 South to North, R/W 14 West
to East, R/W 32 East to West :
Melbourne (YMML) R/W 09 West to East, R/W 27 East to West, R/W 16 North
to South, R/W 34 South to North :
Adelaide (YPAD) R/W 05 South to North, R/W 23 North to South, R/W 12 West
to East, R/W 30 East to West:
Various Other Useful Aviation Frequencies for the East Coast of Australia:
Others :
• Select the desired Wave Length you want to calculate (i.e. Quarter Wave Length)
• Enter radio frequency into the Enter Frequency field (i.e. 1090 for ADS-B)
• Wavelength will automatically be shown in meters, feet & inches
(i.e. 0.0688 meters or 68 mm)
Class C: This is the controlled airspace surrounding major airports. Both IFR and VFR flights are
permitted and must communicate with air traffic control. IFR aircraft are positively separated from
both IFR and VFR aircraft. VFR aircraft are provided traffic information on other VFR aircraft.
Class D: This is the controlled airspace that surrounds general aviation and regional airports
equipped with a control tower. All flights require ATC clearance.
Class E: This mid-level en route controlled airspace is open to both IFR and VFR aircraft. IFR flights
are required to communicate with ATC and must request ATC clearance.
Class G: This airspace is uncontrolled. Both IFR and VFR aircraft are permitted and neither require
ATC clearance.
Note: At towered airports the class of airspace may change subject to the time of day.