Professional Documents
Culture Documents
Res-e02-2202-S-1008 Upper Roof Floor Framing Plan
Res-e02-2202-S-1008 Upper Roof Floor Framing Plan
Res-e02-2202-S-1008 Upper Roof Floor Framing Plan
NOTE: 1. This drawing should be used in coordination with all other drawings presented for this project by the
1. FOR BEAM TOP LEVEL REFER TO S-4101 consultant.
2. All dimensions are in millimeters unless otherwise specified.
3. DO NOT SCALE FROM DRAWINGS. For clarifications of dimensions, refer the Engineer.
4. The contractor shall review and verify all dimensions and coordinates prior to commencement of works.
5. All discrepancies shall be immediately reported to the Engineer. Failure to do so does not relieve the
A B C D E F G contractor of the responsibility of verification of all dimensions.
6. All works shall be carried out in accordance with QCS-2014 (Qatar Construction Specification) as a
minimum standard.
7. All Reinforcing bars shall be deformed high strength and shall conform to (QASCO) specification with
minimum yield strength of 500 N/mm².
KEY PLAN
B01 (400x400) B01 (400x400) B01 (400x400) B01 (400x400) CB01 (400x400)
1
B01 (4
B01 (400x400)
SB1 SB1 SB1
00x40
0)
CSB1
CSB1
CSB1
CSB1
CSB1 SB1 CSB1 CSB1 SB1 CSB1
2
B01 (4
B01 (400x400)
14
SB1
SB1
0 ISSUED FOR TENDER 2023-02-12
0
SB1
SB1
0x400
S-5103
1 ISSUED FOR TENDER 2023-06-25
)
CB02 (200x600)
B02 (200x600) B02 (200x600) CB02 (200x600) CB03 (250x1250) CB03 (250x1250) B02 (200x600)
3 CSB1 SB1 SB1 SB1 SB1 SB1
B02
B02
B02
SSL +20.830 200
QND+25.130
B01 (4
200
B01 (400x400)
B02 (2
CB02 (200x600) B02 (200x600) B02 (200x600)
00x40
B03 (2
SSL +20.830
SB1
SB1
SB1
SB1
00x60
QND+25.130
REVISIONS
0)
50x12
0)
B03 (250x1250)
B03 (250x1250)
50)
DETAIL - 1
CSB1 SB1 SB1 REFER S-XXXX SB1 SB1 SB1
4
B01 (200x600)
QR-Code MUNICIPALITY STAMP
200
B02 (2
B01 (4
B01 (400x400)
SSL +22.450
B03 (250x1250)
00x60
00x400
QND+26.750
SB1
SB1
SB1
SB1
0)
STEEL ROOF/SKYLIGHT
)
TO BE DESIGN BY
SPECIALIST
B01 (200x600)
CSB1 SB1 SB1 SB1 SB1 SB1
5 CB03 (250x1250)
B03 (2
CB03 (250x1250)
50x125
DETAIL - 2
B01 (4
B03 (250x1250) REFER S-XXXX
B01 (400x400)
0)
SB1
SB1
00x400
SB1
SB1
B03 (2
B03 (250x1250)
)
CB02 (200x600)
50x12
B02 (200x600) B02 (200x600) CB02 (200x600) SB1 B02 (200x600)
50)
B04 (300x600) SB1
6 CSB1 SB1 SB1 SB1
SSL +20.830
B02
B02
B02
B02
SSL +20.830
200 200 QND+25.130 ENQUIRY No. : Application No :
QND+25.130
B01 (4
B01 (400x400)
CB02 (200x600) B02 (200x600) B02 (200x600) CONSULTANT REG. No : GRADE: CONSULTANT REG. No : GRADE:
0
SB1
SB1
0x400
SB1
SB1
)
CSB1 SB1 SB1 SB1 SB1 SB1
7
CSB1
CSB1
B01 (4
CSB1
CSB1
B01 (400x400)
00x40
SB1 SB1 REGISTIRATION No.: REGISTIRATION No.:
0)
CONSULTANT
B01 (400x400) B01 (400x400) B01 (400x400) B01 (400x400) B01 (400x400)
8 BACCA
Architecture & Engineering Consultant
CLIENT/DEVELOPER
Scale: 1:100
RES-E02-2202
STR Drawn
Author
Checked
Checker
Approved
Approver
A1
Drawing No. Revision
S-1008 01