Professional Documents
Culture Documents
Service Sheet
Service Sheet
Issue 3 en-GB
311 473
Inspection for industrial engines
Dealer Customer
©
Scania CV AB 2010, Sweden
Inspection Comments Carried out
R S M L XL
Air cleaner
Reading the vacuum indicator. X X X X
Cleaning or renewing the filter X X at least once every 5 years
element.
Renewing the safety cartridge. X at least once every 5 years
Fuel system
Renewing the fuel filter. X X X at least once every 5 years
Electrical system
Checking the electrolyte level in X X X X
batteries.
Checking state of charge. X X X at least once a year
Cleaning the batteries. X X X at least once a year
Checking the coolant level monitor. X X X at least once a year
Other
Checking the drive belt. X X X at least once a year
Check for leaks. X X X X
Checking and adjusting the valve X X X
clearance.
Checking and adjusting unit X X X
injectors on PDE.
Renewing the reductant filter. X X X at least once a year
2 ©
Scania CV AB 2010, Sweden 00:23-01
Programme
The inspection programme includes the following inspections:
• R Inspection: Performed after 500 hours together with the first S inspection.
• S Inspection: Minimum basic inspection.
• M Inspection: More extensive inspection.
• L Inspection: Includes almost all steps.
• XL Inspection: Includes all inspection steps.
Inspection sequence
During a period, the sequence is (R+S)-M-S-L-S-M-S-L-S-M-S-XL
XL
L L
M M M
S S S S S S
500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000
313 153
00:23-01 ©
Scania CV AB 2010, Sweden 3
Notes
00:23-01 ©
Scania CV AB 2010, Sweden 4