Professional Documents
Culture Documents
Raychem-IM-PMKGLE-Manual Instalación
Raychem-IM-PMKGLE-Manual Instalación
Hazardous Locations
BTV-CR, BTV-CT, QTVR-CT and LBTV2-CT heating cables only
Class I, Div. 2, Groups A, B, C, D
Class II, Div. 2, Groups F, G
-W Class III
A
Nonhazardous Locations
D
KHP-CR heating cables only
KIT CONTENTS
Item Qty Description
A 1 Pressure plate
B C
B 1 End seal body with stainless steel screws
C 1 Red grommet (not for use with LBTV2)
D 1 End seal label
WARNING:
This component is an electrical device that Codes, ground-fault equipment protection • Damaged bus wires can overheat or short.
must be installed correctly to ensure proper must be used. Arcing may not be stopped by Do not break bus wire strands when scoring
operation and to prevent shock or fire. Read these conventional circuit breakers. the jacket or core.
important warnings and carefully follow all of the • Component approvals and performance are based • Keep components and heating cable ends dry
installation instructions. on the use of nVent-specified parts only. Do not before and during installation.
• To minimize the danger of fire from sustained use substitute parts or vinyl electrical tape. • Bus wires will short if they contact each other.
electrical arcing if the heating cable is • The black heating cable core is conductive Keep bus wires separated.
damaged or improperly installed, and to and can short. It must be properly insulated
comply with the requirements of nVent, • Use only fire-resistant insulation materials, such
and kept dry. as fiberglass wrap or flame-retardant foam.
agency certifications, and National Electrical
Identify Heating Cable Type
1 2
3/4 in
(20 mm)
3 4
North America Europe, Middle East, Africa Asia Pacific Latin America
Tel +1.800.545.6258 Tel +32.16.213.511 Tel +86.21.2412.1688 Tel +1.713.868.4800
Fax +1.800.527.5703 Fax +32.16.213.604 Fax +86.21.5426.3167 Fax +1.713.868.2333
thermal.info@nvent.com thermal.info@nvent.com cn.thermal.info@nvent.com thermal.info@nvent.com
nVent.com
©2018 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners.
nVent reserves the right to change specifications without notice.
Raychem-IM-H54075-PMKGLE-EN-1805 PN 143823-000