Professional Documents
Culture Documents
RR151 - Original Part - Non Original Part
RR151 - Original Part - Non Original Part
Original part
Original Part
markings on the back of the CW: HZTL317044 R21 151 V01 1 21 GP2172
(ABB marking only shows 151, not RR151)
markings are made by laser
CW is milled, shiny surface, shows clear milling pattern along intermediate vanes (see arrow 1)
balancing marks at CW inlet over a big area but not deep, only maybe 0.1 to 0.2 mm (see arrow 2)
Part Identification Catalogue ABB
32101 - plain bearing bush / RR 151-14
Original part
Original part
Description
Non originall part is used,
Original Part is without any markings
Part Identification Catalogue ABB
32106 - Thrust bearing / RR 151-14
Original part
Characteristic difference between the parts: length of radial groove (see red rectangles)
Part Identification Catalogue ABB
32107 - bearing bush / RR 151-14
Original part
Original part
Description