Professional Documents
Culture Documents
Datasheet - PREMIO Safety Fail Function
Datasheet - PREMIO Safety Fail Function
ARI-PREMIO®-Plus
9 kN (2023 lbf)
Electric thrust actuator
with fail-safe function
ARI-PREMIO®
9 kN (2023 lbf)
Electric thrust actuator
with fail-safe function
Features
• 2 torque switches
• Max. permissible ambient temperature
0°C to +50°C (32°F to +122°F)
(other temperatures on request)
• Enclosure IP 65
• Additional devices available, e.g. potentiometer
• Travel indicator
• Inductive switch for detecting the triggered fail-safe
function
• Automatic clamping of the spring unit to restore the
fail-safe function
Edition 01/11 - Data subject to alteration Data sheet 000021 englisch (english)
ARI-PREMIO®-Plus / ARI-PREMIO® 9 kN (2023 lbf)
Electric thrust actuator with fail-safe function
Working principle
The fail-safe unit, which is located between the actuator and the valve, consists of four gas springs
that are held over a toggle mechanism and an electro-adhesive magnet during normal operation.
The fail-safe unit works in normal operation without any moving parts and virtually no wear.
In normal operation the actuator closes up the valve with 15kN thrust force.
Relay card
Relais 1 (open) 1 (close) 3 warning 4 failure
Operating voltage UB 6A 250V 2A 30V AC/DC
Max. cable cross section 2,5 mm² (0.0039 inch² / AWG14) 1,5 mm² (0.0023 inch² / AWG16)
Contact material gold
Storage temperature -40 °C ... +85 °C (-40 °F ... +185 °F)
-40 °C ... +60 °C (-40 °F ... +140 °F)
Operating temperature
Observe temperature range for the complete actuator
Features:
• Setting of the switching points over push buttons
• 2 intermediate positions or end positions
• 1 collect failure signal at: - Control signal failure
- Position can not be achieved (motor / gear failure)
- Blockage (actual)
- Actuator not initialised
- Power failure
• 1 collect warning signal at: - Manual operating
- Blockage (detected)
- Position can not be achieved
- Maintenance
- Internal temperature exceeded
- ED management active
- To small travel during initialisation
Accessories ARI-PREMIO®
Potentiometer
Type MP21 (Standard) RP19
Electric resistance values 500 Ohm, 1k Ohm, 2k Ohm, 5k Ohm 100 Ohm, 200 Ohm
Technology Conductive plastic Wire
Resistance tolerance ±15 % ±3 %
Independent linearity tolerance ±1 % ±0,5 %
Capacitance at +40°C / 104°F
1 Watt 0,5 Watt
(0 W at 125°C / 257°F)
Max. / wiper current 10 / 2 μA 35 / 0,1 mA
Max. cable cross section 2,5 mm² (0.0039 inch² / AWG14)
Durability 10 Mio. turns 1 Mio. turns
16000
14000
12000
Thrust force (N)
10000
8000
2000
max. operating force of the
actuator
0
0 °C 10 °C 20 °C 30 °C 40 °C 50 °C
Temperature (°C)
4000 lbf
3500 lbf
3000 lbf
Thrust force (lbf)
2500 lbf
2000 lbf
thrust force extended at
1500 lbf 1.97 inch nominal travel
necessary force
1000 lbf for clamping
max. operating force of the
500 lbf
actuator
0 lbf
30 °F 40 °F 50 °F 60 °F 70 °F 80 °F 90 °F 100 °F 110 °F 120 °F 130 °F
Temperature (°F)
12000
10000
Thrust force (N)
8000
6000
4000
2000
0
0 10 20 30 40 50 60
Travel (mm)
3500 lbf
3000 lbf
2500 lbf
Thrust force (lbf)
2000 lbf
1500 lbf
1000 lbf
500 lbf
0 lbf
0,00 '' 0,50 '' 1,00 '' 1,50 '' 2,00 '' 2,50 ''
Travel (inch)
Sensor
Preloading
Trip cam as
accessory trip slide
Wiring diagram
ARI-PREMIO® 9 kN (2023 lbf)
ARI-PREMIO®-Plus / ARI-PREMIO® 9 kN (2023 lbf)
Dimensions
X L h
(mm) (mm) (mm)
ARI-PREMIO® / ARI-PREMIO®-Plus
with fail-safe function 663 1027 50
9 kN (2023 lbf)
X L h
Nominal travel 50 mm (1.97 inch)
(inch) (inch) (inch)
26.10 40.43 1.97
ARI-Armaturen Albert Richter GmbH & Co. KG, D-33756 Schloß Holte-Stukenbrock,
Tel. +49 52 07 / 994-0, Telefax +49 52 07 / 994-158 or 159 Internet: http://www.ari-armaturen.com E-mail: info.vertrieb@ari-armaturen.com