Professional Documents
Culture Documents
Autronica Flame Detector
Autronica Flame Detector
Flame detectors
Product datasheet
Features
nn FM 3260 (2000).
nn EN54 Certified.
nn Certified SIL 2 Capable.
nn ATEX Directive compliant.
nn Certified performance.
nn Extended detection range.
nn New standard set for cone of vision.
nn HART models available.
nn FDT/DTM capable.
nn Multiple sensitivity levels.
nn Maximum false alarm rejection.
nn Microprocessor controlled heated optics.
nn Calibrated automatic optical check for each
sensor eliminates need for testing with external
test lamp.
nn RFI and EMC Directive compliant. Shown with Q9033A
nn Event logging with time and date stamp. Aluminum Swivel Mount
The X32AF brings state-of-the-art IR flame detection nn Hangars with hydrogen or hypergolic fueled vehicles
to the difficult task of detecting invisible hydrogen nn Refineries hydrogen storage areas
flames. Focusing on the water-band IR emissions nn Chemical loading racks
of hydrogen flame, the X32AF overcomes the nn Hydrogen compressor areas
limited detection range and false alarm tendencies nn Hydrogen cooled generators
of other flame detectors by employing field proven nn Fertilizer plants
multispectrum infrared (MIR) technology. The result nn Silane storage
is unsurpassed flame sensitivity with discrimination nn Gas plants
of non-flame sources in situations where traditional nn Refrigerator buildings
flame detectors are unsuitable.
Operating Voltage 24 Vdc. Operating range is 18 to 30 Vdc. Conduit Entry Size 3/4 inch NPT or M25.
— normally energized 60 ft
50 ft
40 ft
— latching/non-latching. 40 ft 30 ft
30 ft 20 ft
20 ft
Current Output 0–20 mA, with a maximum loop resistance of 10 ft
10 ft
Enclosure Material Copper-free aluminum or 316 stainless steel. Class I, Div. 1, Groups B, C & D (T4A); Increased Safety Model
Class II, Div. 1, Groups E, F & G (T4A); II 2 G
FM 0539 ®
Very High Sensitivity Class II, Div. 2, Groups F & G (T3C); Ex d e IIC T5–T6 Gb
Class III. Ex tb IIIC T130°C
Distance Average Response T6 (Tamb –50°C to +60°C)
Fuel Size/Flow Rate Enclosure NEMA/Type 4X.
feet (m) Time (seconds) T5 (Tamb –50°C to +75°C)
30 inch plume/100 IP66/IP67.
Hydrogen 100 (30.5) 3
SLPM*
Methanol 1 x 1 foot 70 (21.3) 5 Flameproof Model
II 2 G
*Standard Liters Per Minute (Standard conditions defined as +25°C and 14.696 PSIA).
FM 0539®
APPROVED II 2 D
Ex d e IIC T4–T6 Gb
Field of View IECEx Certificate of Conformity
Ex tb IIIC T130°C
IECEx ULD 06.0017X
Very High Sensitivity T6 (Tamb –55°C to +60°C)
Ex d e IIC T5-T6 Gb
T5 (Tamb –55°C to +75°C)
Avg. Horiz. Avg. Vert. Ex tb IIIC T130°C
T4 (Tamb –55°C to +125°C)
Size/Flow Distance Response Response T6 (Tamb = –50°C to +60°C).
Fuel Horiz. Vert. IP66/IP67.
Rate feet (m) Time Time T5 (Tamb = –50°C to +75°C).
(seconds) (seconds) IP66/IP67.
– OR –
30 inch
+45° 2 +45° 8
Hydrogen plume/100 100 (30.5) Ex d IIC T4-T6 Gb
–45° 2.5 –30° 1.5
SLPM* Ex tb IIIC T130°C IEC 61508
+45° 10 +45° 8.5 T6 (Tamb = –55°C to +60°C). Certified SIL 2 Capable.
Methanol 1 x 1 foot 70 (21.3)
–45° 6 –30° 6 T5 (Tamb = –55°C to +75°C). Applies to specific models –
T4 (Tamb = –55°C to +125°C). Refer to the SIL 2 Certified
*Standard Liters Per Minute (Standard conditions defined as +25°C and 14.696 PSIA). IP66/IP67. X32AF Safety manual (95-8582).
NOTE: Refer to the X32AF instruction manual (116-P-X32AF/IGB) for additional
sensitivity levels.
Autronica Fire and Security AS | Tel.: +47 73 58 25 00 | E-mail: info@autronicafire.no | www.autronicafire.com | Page 2