Professional Documents
Culture Documents
5-12-46 - Inspection Document 46
5-12-46 - Inspection Document 46
INSPECTION DOCUMENT 46
Date: _______________
Registration Number: _______________
Serial Number: _______________
Total Time: _______________
1. Description
A. Inspection Document 5-12-46 gives a list of interval item(s), which are completed every 100 hours or 12 calendar months,
whichever occurs first.
B. A descriptive statement of the inspection requirement and the Item Code Number for cross reference to section 5-10-01 is
provided. In many instances, tasks define more specifically the scope and extent of each required inspection. These tasks are
printed in the individual chapters of this manual.
C. The right portion of each page provides room for the mechanic's and inspector's initials and remarks. These pages may be
reproduced as a checklist for use when performing this inspection phase.
2. General Inspection Criteria
A. During accomplishment of each of the specific inspection tasks within this inspection document, additional general inspections
of the surrounding areas should be performed while access is available. These general inspections are intended to detect
obvious conditions which may warrant further action.
B. If it is necessary to replace a component or to make a change to a system while you complete a task, do the task again before
the system or component is returned to service.
ITEM CODE TASK ZONE MECH INSP REMARKS
NUMBER
B243001 Marathon Ni-Cad Battery Functional Check (Capacity Check). 313, 314
The inspection interval can be adjusted after the water loss per
cell is established. Refer to the Battery Service Table. Task 24-
30-00-721
B243003 Saft Ni-Cad Battery Functional Check (Capacity Check) The 313, 314
inspection interval can be adjusted after the water loss per cell is
established. Refer to the Battery Service Table. Task 24-30-00-
722