Professional Documents
Culture Documents
LR25 Catalog Telemecanique LR2 Overload Relay Cross-Ref
LR25 Catalog Telemecanique LR2 Overload Relay Cross-Ref
• Manufacturer cross references are provided to assist product selection. Proper engineering evaluation is required for each customer application.
• Series LR overload relays are intended and UL listed for use with NC1D & Series F family contactors.
* 3 phase FLA values are based on NEC Table 430.250 (2020) for induction type squirrel cage & wound rotor motors. Single phase are based on NEC 430.248.
1) US Breaker LR overloads include single phase protection. For single phase motors, loop the 1st pole/phase back up and through the 2nd pole to balance the load.
34
Fuse/ Fuse/
MCCB MCCB Connect to other supply
Three Phase - Wiring Diagram
95 95
LR
NC1D LR
Aux NC1D Aux
96 96
14 14
NC1D NC1D
LR NC1D
Coil Aux LR NC1D
Coil Aux
13 13
Control supply voltage is the same Control supply voltage is not the same
as the main circuit voltage (3 phase) as the main circuit voltage (3 phase)
Fuse/ Fuse/
MCCB MCCB
Single Phase - Wiring Diagram
95 95
NC1D LR
Aux NC1D LR
Aux
96 96
14 14
NC1D NC1D
LR NC1D
Coil Aux LR NC1D
Coil Aux
13 13
Control supply voltage is the same Control supply voltage is not the same
as the main circuit voltage (single phase) as the main circuit voltage (single phase)
The Control Voltage is Marked Near the A1-A2 Terminals and is Also Measured Between the A1-A2 Terminals.