Spray Painting Skills Competition

You might also like

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 4

SPRAY PAINTING SKILLS COMPETITION

TASKS
On the damaged vehicle panel, you are to carry out the following tasks;
1. Repair the panel ready for spray painting
2. Spray paint the panel to the final finish.

Items to be evaluated:
Marks Marks
During the task the following skills were demonstrated: Comments
available obtained

OBSERVATION CHECKLIST

1. Wore safety clothing


i. Safety boots (Award 1 or 0) 1
ii. Apron/overall (Award 1 or 0) 1
iii. Gloves (Award 1 or 0) 1
iv. Safety glasses (Award 1 or 0)
v. Respiratory mask (Award 1 or 0) 1

Sub Total 5

MARKING SCHEME

TASK 1

1.Planning and preparation to undertake the work

a). Well-arranged working tools and equipment 1

b). Adherence to safety on the work place 1


1 of 4
SPRAY PAINTING SKILLS COMPETITION

c). Clean working area 1

3
Sub-total

2. Identification and correct use of tools and

equipment 1

i) sanding pads 1
ii) mineral spirits 1
iii) paint sprayer
iv) air compressor 1

3. Preparation of car for painting

I) Surface cleaning 2

2
ii) remove rust and plastic trim
3
iii) Sanding using circular motions all the way to

bare metal, original primer or at least enough

for paint to adhere to.


2
iv) Cleaning using rag and mineral spirits
6
v) Minimize the dent using dent removal

technique -pulling

-straightening
4
vi) Apply body filler
2
vii) Sand the filler
2

2 of 4
SPRAY PAINTING SKILLS COMPETITION

viii) Smooth the finish

ix) Correct Masking off surfaces

Sub-Total 30

3.priming

I) Correct application of primer 4

ii) Correct time during curing 2

iii) Sanding 2

iv) Correct cleaning after sanding 2

Sub-Total 10

4. Paint application

i) Mixing the paint according to manufacturer's 4

instructions

ii) Setting up the spray gun 2

iii) Correct application of primer 2

iv) Correct application of Base coat 2

v) Correct application of Clear coat 2

3 of 4
SPRAY PAINTING SKILLS COMPETITION

vi) buffing done correctly 3

Sub-Total 15

5. Removing masking tape correctly 2

6.Final inspection done after curing 2

7.i) Correct handling of tools, materials and 2

equipment

ii) Proper waste disposal 1

Sub-Total 7

TOTAL 70

Date:

THIS IS THE LAST PRINTED PAGE

4 of 4

You might also like