Professional Documents
Culture Documents
THESIS
THESIS
True wisdom is to know what is likely to happen. These words can be best described to
swami jyothirmayananda, The chief sevak representing Delhi sewa trust .He was the
main architect who respond to the call given by board of directors of The play Bharat
heavy electrical limited, Haridwar play in 1987, for establishing a science degree college
in their premises.
Since the efforts continued and the college was approved by the state government of
Uttar pradesh with their letter no. 282/15-II-89-2-24/88 dated March 1989.Up
government put the college on grant –in –aid list Yd October 1994 with letter degree
arth 1/3717-21/96-97 dated 22 -5-96 the history of genesis rested on the collaboration
of BHEL among those who responded to our offer of service and deserve mention in this
pages ,are sri P.S Gupta then chairmen ,BHEL,late sri.D.v bhatnagar,G.M .and sri R.D.
shukhla, then G.M.,BHEL.
The effort culminated in laying the foundation of the college on 16 th may 1989.The
chief minister, sri narayan Dutt tiwari, inaugrated the college amidst the chanting of
Vedic hymns and the blissful radiation of pujya Gurudev’s spiritual aura.Its portal of
youth on college opened 11 th December 1989.This college is just an extension of vast
network of education and social service institutional spread all over India and abroad.
It can justifiably take pride in having an enviable record in the academics and extra –
curricularfields in short span of its 28 years of existance.
DECLARATION
Annu Ross ,a full bonafide student of M.SC 4 th semester in Microbiology course from
Chinmaya Degree College B.H.E.L Haridwar Uttarakhand , Affilated with H.N.B Garhwal
University Srinagar.
Hereby,
Certify that this three month summer training is carried out by. me at Hindustan
Unilever Limited Haridwar, Uttarakhand.
the training period from 04th january 2023 to 14th april 2023 the report submitted in
partial fulfillment of the requirement of the programme is an original work of mine
under the guidence of Ms.Suman Maske (Quality manager) and is not based or
reproduce from any existing work or any other person or on any earlier work
undertaken at any other time or for any other purpose. And has not been submitted
anywhere else at any time.
(Annu Ross)
ACKNOWLEDGEMENT
Firstly I would like to express my special thanks of gratitude to (H.O.D)
Dr.Deepika upadhya Department of Microbiology, C.D.C Haridwar whose constant
guidance and suggestion helped throughout my M.SC. program.
Last but not least I would pay my sincere gratitude to my loving parents and my
best friends ,relatives and wishesto my helping moral support and give guideline of
training project work as well as journey till now.
DEPARTMENT OF MICROBIOLOGY
CHINMAYA DEGREE COLLEGE HARIDWAR (U.K)
H.N.B GARHWAL UNIVERSITY
SUBMITTED IN PARTIAL FULFILLMENT OF THE REQUIREMENT FOR THE
AWARD OF THE DEGREE OF
MASTER OF SCIENCE IN MICROBIOLOGY
2021-23
SUPERVISION OF
CONTENT
1. INTRODUCTION
2. AIM AND OBJECTIVES
3. REVIEW OF LITERATURE
4. MATERIAL AND METHOD
5. RESULT
6. DISCUSSION
7. SUMMARY
8. CONCLUSION
9. REFERENCES
HINDUST
AN UNILEVER LIMITED
AN INTRODUCTION
Hindustan Unilever has been at the helm of a lot of controversies, such as dumping
highly toxic mercury-contaminated waste in regular dumps, contaminating the land and
water of Kodaikanal. (See: Kodaikanal mercury poisoning). The British company also
faced major flak for an advertising campaign attacking the Hindu pilgrimage site
at Kumbh Mela, calling it a "place where old people get abandoned,"[5][6] a move that
was termed racist and insensitive.[5]
2021-23
SUBMITED BY:
ANNU ROSS
CHAPTER-1
INTRODUCTION
In the manufacturing of cosmetics, microbiology is crucial.The greatest care must be
taken to avoid external contamination of specific matter, contaminants, and
microorganisms at all stages of the manufacturing of shampoo, tooth paste, Lifebouy
soap, skin care products, etc.
In the aqueous phase, everything happens. The most often utilised raw ingredient in
production, processing, and formulation is water. Approximately 75% of the earth's crust
is made up of water. It may also be an excipient, or it may be used for product
reconstitution, during synthesis, during the manufacturing of completed goods, or it may
be used as a cleaning agent for equipment, primary packing materials, containers, etc.
There are several different types of water that are utilised in industry, including raw
water, demineralized water, process water, and chlorinated water.
Raw water is plain drinking water or potable water that is filtered using gravel and an
activated carbon bed. It has many cations, anions, and suspended particles. This water is
employed in industries generally.
By removing the chemicals that cause water hardness, a water softener converts raw
water into soft water.Demineralized water (DMW), process water, and chlorinated
water are all further modifications of raw water.Chemical and microbiological testing is
done on the raw water utilised.
The term "purified water" also applies to demineralized water. Ion exchange is used to
prepare it. It is employed in manufacturing. It is safeguarded against microbial
contamination. The total viable aerobic count ,yeast & molds growth is well managed
and monitored during manufacturing by taking the necessary precautions. under normal
condition ,total viable count is 100 cfu/ml. this is determined by membrane filtration
and pour plate method.