Professional Documents
Culture Documents
Noc19 Me35 Assignment8
Noc19 Me35 Assignment8
reviewer4@nptel.iitm.ac.in ▼
Unit 8 - WEEK 07
Register for
Certification exam Assignment 07
The due date for submitting this assignment has passed.
Course As per our records you have not submitted this Due on 2019-03-20, 23:59 IST.
outline
assignment.
How to access 1) The transverse modulus of a unidirectional composite material is most strongly influenced 1 point
the portal by :
Fiber properties.
WEEK 02
Interfacing between matrix and fiber.
WEEK 03
None of these
Lecture 40:
3) Estimate the transverse modulus (ET), of the glass-epoxy composite with a1 point
Failure modes fiber volume fraction of 25%. Modulus of elasticity of glass fiber and epoxy is 70
of composite GPa, and 3.5 GPa, respectively. Assume that fibers have a circular cross-section.
materials
© 2014 NPTEL - Privacy & Terms - Honor Code - FAQs -
Lecture 41: -
A project of modes
Failure In association with
8.5 GPa
of composite
materials 9.25 GPa
properties Powered by
10.5 GPa
Quiz :
Assignment 07 No, the answer is incorrect.
Score: 0
Introduction To
Composites : Accepted Answers:
Feedback For 6.5 GPa
Week 7
4) Which one of the following does not occur during a composite failure in longitudinal 1 point
Assignment 7 compression mode?
Solution
3.0 GPa
2.7 GPa
5.3 GPa
6) For unidirectional composites, the moisture expansion coefficient is virtually negligible for 1 point
which direction?
Longitudinal direction
Transverse direction
None of these
1.92*10-5
1.09*10-5
0.77*10-5
0.61*10-5
8) Calculate the major Poisson’s ratio for Kevlar-epoxy composite with a fiber volume fraction 1 point
of 30%. The Poisson’s ratios for Kevlar and epoxy are 0.20 and 0.35, respectively.
0.20
0.25
0.30
0.35
9) Which of the following is the most common type of failure when a unidirectional composite 1 point
fails due to transverse tensile load?
Matrix failure
Fiber debonding
Fiber splitting
None of these
10) In general “fiber breakage” type of failure mode occurs in glass fiber 1 point
composite, when:
Vf<40%
65%>Vf>40
Vf>65%
None of these