Professional Documents
Culture Documents
Design and Analysis of Small Container Vessel For Indian Ports
Design and Analysis of Small Container Vessel For Indian Ports
Show the symbol for Roller Fixed and Pin - support and its expected reaction
due to load applied on the beam where it supports the beam
Explain with neat sketches the sign convention for drawing Shear Force
Diagram and Bending Moment Diagram.
Draw the shear force and bending moment diagram of a cantilever beam
subjected to a concentrated load at the free end.
4
UNIT : S.F.D and B.M.D
Draw the S.F. and B.M. diagrams for a simply supported beam of length ‘L’
having a load ‘P’ applied at the midpoint of the length.
5
UNIT : S.F.D and B.M.D
Draw the S.F and B.M diagrams cantilever of length L carrying a uniformly
distributed load of ‘w’ per m length over its entire length.
6
UNIT : S.F.D and B.M.D
7
UNIT : S.F.D and B.M.D
Draw the shear force and bending moment diagram of a cantilever beam
subjected to a clockwise moment load at the free end.
8
UNIT : S.F.D and B.M.D
Draw the shear force and bending moment diagram of a cantilever beam
subjected to a clockwise moment load at the mid span.
9
UNIT : S.F.D and B.M.D
10
UNIT : S.F.D and B.M.D
11
UNIT : S.F.D and B.M.D
UNIT : S.F.D and B.M.D IMU QB
Draw the Shear force and bending moment diagrams for the cantilever beam
shown in fig.
13
UNIT : S.F.D and B.M.D IMU QB
14
UNIT : S.F.D and B.M.D IMU QB
15
UNIT : S.F.D and B.M.D IMU QB
16
UNIT : S.F.D and B.M.D IMU QB
A loaded beam is shown in figure 3. Draw the bending moment and shear force
diagram.
17
UNIT : S.F.D and B.M.D
The beam is supported & loaded as shown in figure. Draw Shear Force &
Bending Moment diagrams indicating all important values. Locate the point of
contra-flexure, if any.
18
UNIT : S.F.D and B.M.D
19
UNIT : S.F.D and B.M.D
How will you draw the S.F and B.M diagrams for a beam which is subjected to
inclined loads?
20
UNIT : S.F.D and B.M.D
21
UNIT : S.F.D and B.M.D
22
TEST : SFD BMD
23