Professional Documents
Culture Documents
Electrohydraulic Proportional Fan Drive Gear Motor Sgm3Y: Features and Benefi Ts
Electrohydraulic Proportional Fan Drive Gear Motor Sgm3Y: Features and Benefi Ts
Data Sheet
Proportional Fan Fan Drive Motor SGM3Y
(with SAE B, 2-bolts mounting flange)
Drive Gear Motor
Features and Benefits
SGM3Y
• Intermittent fluid temperature up to 110 °C [230 °F]
Introduction Minimum viscosity 10 mm2/s [60 SUS] /
Sauer-Danfoss has over many years Ambient temperature up to 105 °C [220 °F]
built up a wealth of experience – Higher temperature capabilities for today‘s hotter running
with its hydraulic and electro- machines
hydraulic fan drive systems.
Modern fan drives require • Cast iron rear cover and high temperature seals
proportional electronic control to – Extended life under extreme temperature and pressure
help meet new emissions conditions
legislation. Vehicle designers
require compact and integrated • High efficiency based on the proven Sauer-Danfoss gear
solutions for flexible mounting motors
of the radiator. The new Sauer- – Reduce fuel consumption
Danfoss electrohydraulic
proportional fan drive gear motors • Integrated dust cover
have been developed to meet – Safety protection by preventing dirt ingression across the
these demands. shaft seal
Comprehensive technical information: SGM2Y and SGM3Y Fan Drive Gear Motors - Technical Information, 11040345
Sauer-Danfoss product literature on line at: www.sauer-danfoss.com
Circuit diagram
13.5 ±1.0
52.8 max
[6.63]
[2.08]
[2
x
Connector
12.8 min
[0.38 -0.02]
27 max
[0.50]
[1.06]
Deutsch DT 04-2P
∅101.6 -0.05
X
[4.00 -0.002]
157 max
[6.18]
148 max
[5.83]
x
ma
97.2 max
5.3 ]
[0.875 ±0.02]
[3.83]
R1 [0.60
22.22 ±0.5
[0.875 ±0.039]
R0.8 max
22.22 ±1.0
full thread
A
21.5 min.
11056719 • Rev AA • Feb 2009 © Copyright 2009, Sauer-Danfoss. All rights reserved. Contents subject to change.
All trademarks in this material are properties of their respective owners.