Professional Documents
Culture Documents
Certificado Cerraduras Test Anti Fuego
Certificado Cerraduras Test Anti Fuego
Certificado Cerraduras Test Anti Fuego
No CF 5271
This is to certify that, in accordance with
TS00 General Requirements for Certification of Fire Protection Products
The undermentioned products of
BKS GMBH
HEIDESTRASSE 71
D-42549 VELBERT/GERMANY
Tel: 004 9205 120 1485
Have been assessed against the requirements of the Technical Schedule(s)
denoted below and are approved for use subject to the conditions
appended hereto:
______________________________________________________________________________
This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.
CERTIFICATE No CF 5271
BKS GMBH
BKS GmbH Locks and Latches
1. This approval applies only to the BKS GmbH locks and latches detailed later in this
certificate.
3. This approval relates to their use with the following door assemblies: -
5. This approval is applicable only to the specified locks/latches used with door assemblies
of proven fire resistance (as defined in BS EN 1634-1 or BS 476: Part 22: 1987) and,
when fitted to timber based doorsets, using appropriate intumescent protection. The
required protection will be 2 mm thick Mono Ammonium Phosphate intumescent sheet
behind the forend and strike/keep plates and 1 mm thick Mono Ammonium Phosphate
intumescent sheet around the lock case for all doorset assemblies. Failure to install the
protection will invalidate this certificate.
This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.
CERTIFICATE No CF 5271
BKS GMBH
BKS GmbH Locks and Latches
7. The approval relates to on-going production. Product and/or its immediate packaging are
identified with the manufacturer’s name, the product name or number, the CERTIFIRE
name or name and mark, together with the CERTIFIRE certificate number and
application where appropriate.
8. The locks/latches should not be fitted higher than 1100 mm from the finished floor level of
the surrounding floors.
10. The following table shows acceptable doorset types and fire resistance periods:
This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.
CERTIFICATE No CF 5271
BKS GMBH
BKS GmbH Locks and Latches
Limitations of Approval
The leaves of 30 minute doorsets shall have a minimum thickness of 44 mm and shall be
provided with hardwood timber lippings having a minimum thickness of 8 mm and a
minimum density of 650kg/m3. The door frame shall be of timber and shall have a
minimum density of 460kg/m3.
The leaves of 60 minute doorsets shall have a minimum thickness of 54 mm and shall be
provided with hardwood timber lippings having a minimum thickness of 8 mm and a
minimum density of 650kg/m3. The door frame shall be of hardwood timber and shall
have a minimum density of 650kg/m3.
In the case of deadbolt lock models these shall only be fitted to previously proven
unlatched doorsets unless they are intended to be permanently locked.
Lock/Latch
Description Classification to EN 12209: 2003
Reference
B-24550-xx-0-8 Mortice Sashlock 3 X 8 1 0 G 3 B C 2 0
B-24551-xx-0-8 Mortice Passage Lock (Latch) 3 X 8 1 0 G 0 B 0 2 0
B-24552-xx-0-8 Mortice Deadlock 3 X 8 1 0 G 3 B C 0 0
B-24553-xx-0-8 Mortice Bathroom Lock 3 X 8 1 0 G 0 B G 2 0
B-24554-xx-0-8 Mortice Nightlatch (Latch) 3 X 8 1 0 G 1 B B 2 0
The approval includes the above lock models in square or radius forend/strike.
Further Information
Further information regarding the details contained in this certificate may be obtained from BKS
GmbH (Tel: 004 9205 120 1485).
Further information regarding CERTIFIRE certification and other approved products can be obtained
from CERTIFIRE (Tel: 01925 646777)
This certificate is the property of Warrington Certification Limited, Holmesfield Road, Warrington, Cheshire WA1 2DS, UK. Registered company No. 02250182.