Professional Documents
Culture Documents
Water Pump
Water Pump
Page 1 of 2
Shutdown SIS
Previous Screen
i05292437
Removal Procedure
Start By:
a. Remove the fan and the fan pulley. Refer to Disassembly and Assembly, "Fan - Remove
and Install" for the correct procedure.
NOTICE
NOTICE
1. Drain the coolant from the cooling system into a suitable container for storage or disposal.
Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the
correct procedure.
2. Loosen the hose clamps and remove the hose from the water pump inlet.
Illustration 1 g03434676
3. Remove bolts (4), bolts (5), and bolts (6). Identify the positions of bolts of different length.
Note: If necessary, tap the water pump with a soft faced hammer in order to loosen the
water pump.
Copyright 1993 - 2024 Caterpillar Inc. Wed May 29 17:39:05 EST 2024
All Rights Reserved.
Private Network For SIS Licensees.