Professional Documents
Culture Documents
Simco - Power-Units
Simco - Power-Units
AC
A UNIT
The standard model has a modern styling featuring easy-access control and connec- A Unit
tions. It is equipped with an on/off switch with an indicator lamp as well as a high- Housing material aluminum and steel, powdercoating
voltage indicator lamp. This lamp will extinguish if the system is malfunctioning. Weight 2,8 kg
Approval UL*
TYPE A2A5S
*Contact Simco for other voltages, frequencies and approvals.
For anti-static bar type MaxION.
www.simco.nl
POWER UNITS
AC
A UNIT BHR
This type is similar to the A2A4S and A2A7S but is also fitted with a PCB offering
the following options:
B: Ion balance.
Using an electronic circuit, the ion balance can be adjusted accurately by a
potentiometer.
H: High-voltage control.
Apart from the high-voltage indicator lamp, the PCB is fitted with a relay with
make contacts. If the high voltage fails, the relay immediately closes the circuit to
activate an alarm (lamp, PLC etc.).
R: Remote control.
The power unit can be remotely switched on or off by a potential-free contact
(e.g. a PLC).
29
POWER UNITS
BIPHASE
LB UNIT
This power unit is equipped with two high-voltage transformers with 180°phase- LB
shifted output voltages. As a result, the anti-static bars connected to the power Housing material steel, powdercoating
unit produce positive and negative ions simultaneously. This ensures optimal Weight 6 kg
neutralization of static charges even at very high velocities. This power unit is fitted Connections 2x4
Cable 1,8 m
TYPE LB2A4BHR AND LB2A7BHR
Ambient temperature 0 - 50 °C
Frequency 50 or 60 Hz*
U secundairy 4 - 7 kV AC *
www.simco.nl