Professional Documents
Culture Documents
Esco - CO2 Incubator Service - A4 - Tri-Fold Brochure - VB - LR
Esco - CO2 Incubator Service - A4 - Tri-Fold Brochure - VB - LR
Esco - CO2 Incubator Service - A4 - Tri-Fold Brochure - VB - LR
Joint Ventures
Licensee
is a must.
LVES App ULTF App iRMAP ESCO FH Fan Mrs Einesco Cattacktics!
Your Quick Guide to Personal ULTF Touch Selector Fertilization
Esco ensures that its service is on top of the line Safety Cabinets Screen Interface App Obstacle Game
Services
Esco Social Media
excellent working condition. and Apps
www.escolifesciences.com
9010370_Esco CelCultureService_A4_Tri-fold brochure_vB_011321
Esco can accept no responsibility for possible errors in catalogues, brochures and other printed materials. Esco reserves the right to alter its
products and specifications without notice. All trademarks and logotypes in this material are the property of Esco and the respective companies.
• General Inspection • UV Lamp Replacement
Check the following regularly – at (for units with UV lamp)
least annually.
- The UV lamp ensures that the circulating
- Tightness of the glass door seal
air and the water reservoir remains free of
- Functional check of the operating panel
microorganisms and contaminants.
and device control
Esco CO2 Incubator - Electrical safety check in accordance with - It is advisable to replace the UV lamp every 1000 hours of running
Services the relevant regulations time (approximately around 4 years).
- Check tightness of hinge screws on door’s
moving parts • Maintenance/Service Log
PREVENTIVE MAINTENANCE - Check the latch of glass door if working
SERVICES It is good practice (and in some cases regulatory requirement)
properly and able to close tight
to maintain a log of all maintenance work carried out on your
Scheduled Maintenance incubator.
• Calibration of temperature, CO2 ,
Maintenance to be carried out
No. Description of Task to Perform
Daily Weekly Yearly As Needed
O2 and humidity
1 Check CO2 / N2 gas tank level √ - The temperature, CO2, O2 and RH reading TROUBLESHOOTING AND
2 Check water level in the humidity pan √ can be calibrated to reference instruments. PARTS REPLACEMENT
3 Clean the interior and exterior of incubator √
4 Calibration of O2 sensor √ √ - It is recommended to calibrate at least
5 General Inspection √ once a year to ensure continuous and optimal performance of the Esco provides replacements for consumable elements as well as
6 Calibration of temperature sensor √ CO2 incubator. any components that might fail while the product is in service.
7 Calibration of CO2 sensor √
8 Calibration of humidity sensor √
9 ULPA filter replacement (170L/240L) √
• ULPA Filter Replacement
10 Inlet filters replacement √ - The ULPA filter provides contaminant free IQ/OQ VALIDATION
11 Outer door magnetic gasket replacement √ √ air within the work area of the incubator.
12 Decontamination √
- It is recommended to replace the ULPA Esco provides our customers instructions for Installation / Operation
13 Change UV lamp (for units with UV lamp) √
filter once a year.
Qualification (IQ/OQ) protocol of our products. Esco also can
• Check CO2 / N2 gas tank level perform these services directly on behalf of its customers or arrange
Check the pressure gauge on the two-stage • Inline Filters Replacement them through independent approved local certifiers. The availability
gas regulator daily to ensure the pressure - Inlet filters are installed to remove any may vary from country to country and region to region. Also, Esco
is not below 15 psig. Replace new tank if contaminant in the CO2 or N2 gas supply. can train customer employees to perform IQ / OQ.
necessary. - Replace the inlet filters at least once a year
or when the filter is dirty by visual inspection.
• Check water level in the humidity TRAINING AND WORKSHOPS
pan • Outer Door Magnetic Gasket
Check weekly to ensure there is sufficient Replacement Esco offers training for users of CO2 Incubator on the procedures
water in the pan. It is recommended to check - The magnetic door gasket installed in the in its User and Service Manuals.
the water level and refill the humidity pan
outer door of the incubator helps to keep a
with sterile distilled water once a week.
tight seal around the chamber opening.
- It is recommended to check the magnetic door gasket for signs SERVICES TO OTHER BRANDS
• Clean the interior and exterior of
of brittleness, corrosion, wearing, or any form of damage once a
incubator year. Esco does not only provide services to its product line but also for
Disinfect surfaces with a general purpose
other brands. With a team of certified engineers, Esco assures that
laboratory cleaning agent weekly.
• Decontamination your equipment will be properly checked according to international
Decontaminate inner chamber of the incubator as needed. standards.