Professional Documents
Culture Documents
Calibration Validation
Calibration Validation
CUSTOMER IDENTIFICATION:
Name: SANTECH
Construction: with Stainless Steel Internals, 2-1/2 Inch Dial, 1/4 Inch NPT Bottom Mount
Accuracy: 2%
REFERENCE INSTRUMENT/STANDARD(S) :
Traceability: To international patterns referred to the “National Institute of Science and Technology”
– N.I.S.T. USA.
BLK 18 L7 PH2 IDESIA CITY, SAN AGUSTIN I
CALIBRATION CERTIFICATE DASMARINAS, CAVITE/(046) 450-7973
TEST METHODOLOGY
Procedure: Pressure driven by a manual pump. Different pressure points are fixed on the measuring
instrument (inverse calibration) in two series, one increasing and one decreasing according to the
inner procedure Gesa PC/05/2011
Fluid: Water
Temperature: 25 C
Humidity: 70%
TEST RESULTS:
The expanded uncertainty U has been obtained by multiplying the standard uncertainty uc by a
coverage factor k=2 . The standard uncertainty uc has been obtained according to document EAL-
R2.
Calibrated By:
Approved By:
Juan De La Cruz
Technical Manager
was calibrated, tested, and validated and was found to meet the functional specifications for this
product using the standard tests procedures and validation methodology. In addition, the
instrument as specified has been tested against NIST Traceable standards to ensure that its
performance meets specifications.
To support this certification for XXX requirements of this instrument CALD shall provide the
following document:
• Calibration Certificate
CALD will maintain possession of additional documents and their reproductions may require a non-
disclosure agreement to be provided by those requiring access to these documents.
Juan De La Cruz
Validation/Instrumentation Engineer