Professional Documents
Culture Documents
GSM Based Train Reservation System Using ARM7
GSM Based Train Reservation System Using ARM7
TECHNICAL SPECIFICATION
Crystal : 12MHz
EEPROM : AT24C04
MODEM : GSM
Airways.
In this project we are using LPC2148. The LPC2148 are based on a 16/32 bit
ARM7TDMI-S™ CPU with real-time emulation and embedded trace support, together with
128/512 kilobytes of embedded high speed flash memory. With a wide range of serial
communications interfaces, they are also very well suited for communication gateways, protocol
converters and embedded soft modems as well as many other general-purpose applications.
In this project by sending a simple SMS we can get the status of vacant seats (A/c or
non A/c). From the central system we get a reply status of vacant seats on a particular day. After
conforming, we can book the ticket by sending a 16 pin credit card number to the reservation
system. As a conformation, we can get the M-Ticket (Mobile Ticket) to your mobile phone; just
we have to carry the ticket with us for travelling.
This project uses two power supplies, one is regulated 5V for modules and other one is
3.3V for LPC2148. 7805 three terminal voltage regulator is used for voltage regulation. Bridge
type full wave rectifier is used to rectify the ac out put of secondary of 230/12V step down
transformer.
Block Diagram:
GSM
Battery
U
MAX A
232
R
Battery
T
EEPROM
ARM 7 TDMI
LPC2148
RESET
SWITCH
CRYSTAL
12MHz
Step
Bridge Filter
Down Regulator
Rectifier Circuit
T/F
Power supply to all sections
ADVANTAGES:
1. Ease of maintenance
2. Booking ticket from any remote place.
3. Less power consumption
4. Very faster communication
APPLICATIONS:
2. Railways,
Abstract Prepared By