1. Plug the vehicle into an outlet. 2. Open Dol7, Press alt+R to select "Real" menu, select "Normal Operations" and hit return. 3. Tab over to "Permanent Change" button and hit enter, Tab twice to get into constants selection window. 4. Use page up/down and arrow keys to scroll to "91. vchrgmx" and hit spacebar. This puts selection into box. 5. Hit tab key to highlight "Done" button and hit enter. "Number Entry" box will open. 6. Input 817 for 380 volt pack voltage. Tab to highlight "OK" button and hit enter. 7. Disconnect AC to vehicle. Wait 5 seconds. Reconnect AC to vehicle, new constant is now installed.
Verifying (many) Single Constant value Procedure.
1. Plug the vehicle into an outlet. 2. Open Dol7, Press alt+R to select "Real" menu, select "Normal Operations" and hit return. 3. Tab over to "Constants Select" button and hit enter, Tab twice to get into constants selection window. 4. Use page up/down and arrow keys to scroll to "91. vchrgmx" and hit spacebar. This puts selection into box. 5. The value of the constant will display on the left side, after "Values @ = 6. You can quickly scan through a list of contant values by simply scrolling to the next one and hitting spacebar again. 7. Tab to highlight "OK" and hit enter to exit constants window.