MARPOL Annex IV contains a set of ISPPC (International Sewage Pollution Ordering Information regulations regarding the discharge Prevention Certificate) are issued upon of sewage into the sea from ships, successful inspection and are valid for 5 WTK-CT-80041 including regulations regarding the years. Sewage Effluent Test Kit 1 ships’ equipment and systems for For renewal and random inspections, Complies with MEPC 2(VI) the control of sewage discharge, the
Water Condition Monitoring
maintaining the system operating Commission before 2010 provision of port reception facilities requirements in line with the effluent Coliform Bact. (12): 0 – 2424 CFU/100ml for sewage, and requirements for standards will be required. With this in TSS (unlimited): 5 – 500 mg/l survey and certification (ISPPC – mind, the CMT Marine Sewage Effluent BOD (unlimited): 7.5 – 255 mg/l O2 International Sewage Pollution Test Kit will provide simple and accurate Thermometer: -50 to 150°C Prevention Certificate). testing. Digital Incubator 25 - 45°C The discharge of raw sewage into the Requirements from MARPOL Annex IV sea can create a health hazard, while in WTK-CT-80042 Resolution MEPC.159(55) – Effluent & coastal areas sewage can also lead to Sewage Effluent Test Kit 2 Performance Standards are defined as oxygen depletion and an obvious visual Complies with MEPC 159(55) follows: pollution. Commission 2010 and later • BOD up to 25 ppm Additionally to WTK-CT-80041: Environmental issues are still a hot topic COD Test (25): 0 – 300 mg/l these days. The shipping community • COD up to 125 ppm pH Test Strips (50): 4 – 10 pH expresses its concern about the • Total Suspended Solids max. 35 ppm Free Chlorine (100): 0 – 1.0 ppm ecosystem and the pollution of the Free Chlorine (100): 0 – 30 ppm seas. In this market where low freight • Coliforms up to 100 CFU / 100 ml rates, new rules and regulations and a • pH 6.0 – 8.5 WTK-CT-80043 higher customer demand are pressuring Sewage Effluent Test Kit 3 our business-results, we still desire to • Chlorine (Free) up to 0.5 ppm Complies with MEPC 159(55) & 227(64) comply with new rules and regulations Nowadays tests in the market are All Passenger Ships but preferably in a cost-effective and complicated and comprehensively. The Additionally to WTK-CT-80041: efficient way Chief-Engineers almost need to have a COD Test (25): 0 – 1500 ppm To test the discharge of Sewage chemist-degree in order to understand pH Test Strips (50): 5 – 11 pH treatment plants CMT offers a quick and execute the time consuming tests. Free Chlorine (100): 0 – 1.0 ppm and easy drop test for testing the free The CMT Sewage Effluent Test Kits are Free Chlorine (100): 0 – 30 ppm chlorine content. simple and very user-friendly. Total Nitrogen (25): 0.5 - 25 ppm Total Phosphorus(25): 2 - 2.6 ppm The Budget Sewage Effluent Kit provides an indication for the key WTK-CT-80044 parameters set out in MARPOL Annex Budget Sewage Effluent Test Kit IV. The coliform dip slides provided will Dip Slides (10) 0 - 100,000 CFU / ml require an incubator to ensure accuracy, TSS (unlimited): 5 – 500 mg/l which can be purchased separately. BOD (unlimited): 7.5 – 255 mg/l O2 For complete accuracy you will need to COD (100): 0 - 300 mg/l purchase the standard range of sewage pH Test Strips (50): 5 – 11 pH effluent kits. These come complete with Free Chlorine (100): 0 – 1.0 ppm a coliform plate method and incubator. Free Chlorine (100): 0 – 30 ppm The coliform plate method provides a Thermometer: -50 to 150°C MPN count, which will provide more accuracy than the coliform dip slides. Reagents (Full refill of respective Test Kit) Regular testing will allow rapid corrective action to take place if required, helping WTK-CT-85041 to maintain optimum operating Sewage Effluent Consumables Pack 1 conditions, minimum downtime and WTK-CT-85042 As set out in Annex 22 Resolution reducing costs. Ultimately the CMT Sewage Effluent Consumables Pack 2 MEPC.227(64) adopted on the 5th Marine Effluent Cabinet will aid October 2012, sewage treatment plants compliance with MARPOL Annex IV. WTK-CT-85043 installed prior to 1st January 2010, Sewage Effluent Consumables Pack 3 The CMT Marine Water Test on ships other than passenger ships Solutions comply with: WTK-CT-85044 operating in MARPOL Annex IV special areas and intending to discharge treated • MARPOL Annex IV: Resolution Sewage Effluent Consumables Pack effluent into the sea, should comply with - MEPC.2 (IV) Budget resolution MEPC.2(VI) adopted on 3rd - MEPC.115 (51) December 1976. - MEPC.159 (55)