Professional Documents
Culture Documents
Brochure Hefftron Digital Meters FIX
Brochure Hefftron Digital Meters FIX
1
®
HFPM-96F/I
DIGITAL POWER MONITORING FOR SINGLE AND THREE PHASE SYSTEM
• Measures kWh, kVARh, kW, kVAR, kVA, P, F, PF, Hz, Dmd, V, A, etc.
• Bi-directional measurement IMP & EXP
• Energy information of each phase
• Total harmonic distortion of voltage and current
• 2nd~63rd Individual harmonic distortion
• RS485 Modbus RTU & two pulse outputs
• Bar graph for power indication
• Three phase self-power supply
• Backlit LCD display for full viewing angles
• High accuration class
• Plug-in Play solution
• Real time clock
Features HFPM-96F HFPM-96I
• Dimension: 96x96mm
Network
• Via CT..../1A or ..../5A Single phase 2 wire √ √
Two phase 3 wire √ √
Features HFPM-96F HFPM-96I
Three phase 3 wire √ √
Measurements
Three phase 4 wire √ √
Instantaneous Value
CT programmable √ √
Current I1, I2, I3, In √ √
PT programmable √ √
Voltage L-N V1, V2, V3 √ √
Inputs and Ouputs
L-L V1-2, V2-3, V3-1 √ √
Digital Inputs DI 4
Frequency Hz √ √
Digital Outputs DO 2
Active power P∑, P1, P2, P3 √ √
Analog Outputs AO
Reactive power Q∑, Q1,Q2, Q3 √ √
Pulse Outputs S0
Apparent power S∑,S1, S2, S3 √ √
Alarms 30
PF∑, PF1, PF2,
Power factor √ √ Communications
PF3
Energy Values RS485 Modbus RTU √ √
kWh∑, kWh1, Ethernet TCP/IP √
Active energy √ √
kWh2, kWh3 Ethernet Gateway TCP/IP
kVARh∑, kVARh1, Accuracy Class Class
Reactive energy √ √
kVARh2, kVARh3 Active energy 0.5s 0.5s
kVAh∑, kWAh1, Reactive energy 1 1
Apparent energy √ √
kVAh2, kVAh3
Current 0.2 0.2
Demand Values
Voltage 0.5 0.2
Current √ √
Power 0.5 0.2
Active, reactive, apparent
√ √ THD and IHD 2 2
power
Hz 0.2 0.2
Maximum Demand Values
Number of measurement
Maximum current √ √ 128 256
points per circle
Maximum active power √ √
Power supply
Maximum reactive power √ √
65~480VAC /
Maximum apparent power √ √ Auxiliary power supply √ √
80~660VDC
Min. and Max. Value 24~48VDC * *
Active power per phase and Self-power supply 100~480VAC
√ √
total
DPF Displacement Power
Reactive power per phase √
√ √ Factor)
and total
Voltage crest factor √
Apparent power per phase
√ √ Current K factor √
and total
Voltage unbalance √
PF per phase and total √ √
Current per phase and
√ √
average Dimension
3
62
98
17
5m
m
62 mm
35m m
2
®
Specification Accuracy
Nominal voltage(Un) 230VAC Voltage,Current 0.5
Operational voltage 80%~120% of Un Frequency 0.2 of mid-frequency
Insulation capabilities Power factor 1 of unity (0.01)
- AC voltage withstand 4kV for 1 minute Active power, Apparent power 1 of range maximum
- Impulse voltage withstand 6kV-1.2μS Reactive power 1 of range maximum
Basic current (Ib) 5A Reactive energy (VARh) Class 2
Maximum rated current (Imax) 32A Active energy (Wh) Class 1
Mini currrent (Imin) 0.25A Modbus
Operational current range 0.4% Ib-Imax Bus type RS485(semi-duplex)
Over current withstand 30 Imax for 0.01s Protocol Modbus RTU
Operational frequency range 50 or 60Hz 1200/2400/4800/9600/19.200
Baud rate
Internal power consumption <2W/10VA (Optional)
Pulse output 1 Configurable Address range 1-247
Pulse output 2 1000imp/kWh (default) Max. Bus loading 64pcs
Max reading 99999.9kWh Communication distance 1000M
Display LCD with blue backlit Pulse output
Performance criteria Pulse outputs 2
Operating humidity ≤ 90% Pulse output type Passive
Storage humidity ≤ 95% Pulse Output 1 Configurable
Operating temperature -25°C - +55°C Pulse width 200/100(default)/60ms
Storage temperature -40°C - +70°C Pulse output 2 1000imp/kWh
Reference temperature 23°C ± 2°C
International standard IEC 62053-21 / EN50470-1/3
Accuracy class Class 1/Class B
Installation category CAT II
Mechanical environment M1
Electromagnetic environment E2
Degree of pollution 2
Protection against penetration
IP51(indoor)
of dust and water
Insulating encased meter of
II
protective class
G B A
62 mm
35m m
3
®
4
®
L in L out
4 5 mm
1 2
15 16
63 mm
1 2
+ - +
5 6 7 8 9 10
PULSE OUTPUT
36
m
m 35mm
99 mm
5 6 7 8 9 10
3 4
N in N out
5
®
Specification Multi-tariff
Nominal voltage(Un) 230VAC time clock accuracy ﹤1s/day
Operational voltage 80%~120% of Un Tariff 4
Insulation capabilities Time segments 10
- AC voltage withstand 4kV for 1 minute Accuracy
- Impulse voltage withstand 6kV-1.2μS Voltage,Current 0.5%
Basic current (Ib) 5A Frequency 0.2% of mid-frequency
Maximum rated current (Imax) 63A Power factor 1% of unity (0.01)
Mini current (Imin) 0.25A Active power , Apparent power ±1% of range maximum
Operational current range 0.4% Ib-Imax Reactive power ±1% of range maximum
Over current withstand 30 Imax for 0.01s Reactive energy(Varh) Class 2
Operational frequency range 50/60Hz Active energy (Wh) Class 1
Internal power consumption ≤ 2W/10VA Modbus
Pulse output 1 Configurable Bus type RS485(semi-duplex)
Pulse output 2 1000imp/kWh Protocol Modbus RTU
Max reading 99999.99 kWh/kVarh 1200/2400/4800/9600bps/19200
Baud rate
(optional)
Performance criteria
Address range 1-247
Operating humidity ≤ 90%
Max. Bus loading 64pcs
Storage humidity ≤ 95%
Communication distance 1000M
Operating temperature -25°C - +55°C Parity EVEN/ODD/NONE
Storage temperature -40°C - +70°C Data bit 8
Reference temperature 23°C± 2°C Stop bit 1
International standard IEC 62053-21 / EN50470-1/3 Pulse Output
Accuracy class Class1/Class B Pulse outputs 2
Installation category CAT II Pulse output type Passive
Mechanical environment M1 Pulse Output 1 Configurable
Electromagnetic environment E2 Pulse width 200/100(default)/60ms
Degree of pollution 2 Pulse output 2 1000imp/kWh
Protection against penetration
IP51(indoor)
of dust and water
Insulating encased meter of
II
protective class
GND B A
2 1
m
45m 4 5 6 7 8 9
PULSE OUTPUT RS485 PORT
5 6 7 8 9 10
47mm
62m m
mm 1 2 3
35
m
9 0m
m
m
36
L IN L OUT
N
6
®
HFEM-3480DCOM-MT
THREE PHASE ENERGY METER
• Multi-measurement : kWh, kVARh, kW, kVAR, kVA, PF, Hz, Dmd, V, A, etc.
• LCD display with backlit
• BI-directional measurement IMP & EXP
• 80A direct connection
• RS485 Modbus
• Real time clock
• Multi tariffs
• 2 Pulse outputs
• 4 Modules, 72mm width
Specification Multi-tariff
Nominal voltage(Un) 3x230/400VAC time clock accuracy ﹤1s/day
Operational voltage 80%~120% of Un Tariff 4
Insulation capabilities Time segments 10
- AC voltage withstand 4kV for 1 minute Accuracy
- Impulse voltage withstand 6kV-1.2μS Voltage,Current 0.5%
Basic current (Ib) 10A Frequency 0.2% of mid-frequency
Maximum rated current (Imax) 80A Power factor 1% of unity (0.01)
Operational current range 0.4% Ib-Imax Active power , Apparent power ±1% of range maximum
Over current withstand 30 Imax for 0.01s Reactive power ±1% of range maximum
Operational frequency range 50/60Hz Reactive energy(Varh) Class 2
Power consumption per phase ≤ 2W/10VA Active energy (Wh) Class 1
Display LCD Modbus
Max reading 999999.99 kWh/kVarh Bus type RS485(semi-duplex)
Performance criteria Protocol Modbus RTU
Operating humidity ≤ 90% Baud rate 2400/4800/9600/19200/38400bps
Storage humidity ≤ 95% Address range 1-247
Operating temperature -25°C - +55°C Max. Bus loading 64pcs
Storage temperature -40°C - +70°C Communication distance 1000M
Reference temperature 23°C± 2°C Parity EVEN/ODD/NONE
IEC 62053-21 / IEC 62053-22 / Data bit 8
International standard
EN50470-1/3 Stop bit 1
Accuracy class Class 1/Class 0.5S/Class B Pulse Output
Installation category CAT III Pulse outputs 2
Mechanical environment M1 Pulse output type Passive
Electromagnetic environment E2 Pulse Output 1 Configurable
Degree of pollution 2 Pulse width 200/100(default)/60ms
Protection against penetration of dust Pulse output 2 400imp/kWh
IP51(indoor)
and water
Insulating encased meter of protective
II
class
Electrostatic discharges 8kV contact / 15kV air gap
Electromagnetic HF fields IEC 61000-4-3
Electrical fast transients 4kV
m L1 L2 L3 N L1 N L1 L3 L2
45 m
1 2 3 4 1 2 3 4 1 2 3 4
5 6 7 8 5 6 7 8 5 6 7 8
m
72 35m
m mm
m
100
L1 L2 L3 N L1 N L1 L3 L2
7
®
Specification Accuracy
Nominal voltage(Un) 3x230/400VAC Voltage,Current 0.5%
Operational voltage 60%~120% of Un Frequency 0.2% of mid-frequency
Insulation capabilities Power factor 1% of unity (0.01)
- AC voltage withstand 4kV for 1 minute Active power , Apparent power ±1% of range maximum
- Impulse voltage withstand 6kV-1.2μS Reactive power ±1% of range maximum
Rated current (Ib) 5A CT or 333mV CT input/100mA Reactive energy(Varh) Class 2
Operational current range 0.4% Ib-Imax Active energy (Wh) Class 0.5S
Over current withstand 20 Imax for 0.01s Modbus
Operational frequency range 50/60Hz Bus type RS485(semi-duplex)
Power consumption per phase ≤ 2W/10VA Protocol Modbus RTU
Pulse output 1 Configurable Baud rate 2400/4800/9600/19200/38400bps
Pulse output 2 3200 imp/kWh Address range 1-247
Display LCD Max. Bus loading 64pcs
Max reading 9999999.9 kWh/kVarh Communication distance 1000M
Performance criteria Parity EVEN/ODD/NONE
Operating humidity ≤ 90% Data bit 8
Storage humidity ≤ 95% Stop bit 1
Operating temperature -25°C - +55°C
Storage temperature -40°C - +70°C
Reference temperature 23°C± 2°C
IEC 62053-21/IEC 62053-22/
International standard
EN50470-1/3
Accuracy class Class 1/Class 0.5S/Class B
Installation category CAT III
Mechanical environment M1
Electromagnetic environment E2
Degree of pollution 2
Protection against penetration of dust
IP51(indoor)
and water
Insulating encased meter of protective
II
class
Electrostatic discharges 8kV contact / 15kV air gap
Radiated & conducted emissions EN 55022
9 10 11 12 13 14 15 16 17 18 19 20 9 10 11 12 13 14 15 16 17 18 19 20 9 10 11 12 13 14 15 16 17 18 19 20
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
Specification Multi-tariff
Nominal voltage(Un) 3x230/400VAC time clock accuracy ﹤1s/day
Operational voltage 80%~120% of Un Tariff 4
Insulation capabilities Time segments 10
- AC voltage withstand 4kV for 1 minute Accuracy
- Impulse voltage withstand 6kV-1.2μS Voltage,Current 0.5%
Basic current (Ib) 10A Frequency 0.2% of mid-frequency
Maximum rated current (Imax) 80A Power factor 1% of unity (0.01)
Operational current range 0.4% Ib-Imax Active power , Apparent power ±1% of range maximum
Over current withstand 30 Imax for 0.01s Reactive power ±1% of range maximum
Operational frequency range 50/60Hz Reactive energy(Varh) Class 2
Power consumption per phase ≤ 2W/10VA Active energy (Wh) Class 1
Display LCD Modbus
Max reading 999999.99 kWh/kVarh Bus type RS485(semi-duplex)
Performance criteria Protocol Modbus RTU
Operating humidity ≤ 90% Baud rate 1200/2400/4800/9600bps
Storage humidity ≤ 95% Address range 1-247
Operating temperature -25°C - +55°C Max. Bus loading 64pcs
Storage temperature -40°C - +70°C Communication distance 1000M
Reference temperature 23°C± 2°C Parity EVEN/ODD/NONE
International standard IEC 62053-21 / EN50470-3 Data bit 8
Accuracy class Class 1 Stop bit 1
Installation category CAT III Pulse Output
Mechanical environment M1 Pulse outputs 2
Electromagnetic environment E2 Pulse output type Passive
Degree of pollution 2 Pulse Output 1 Configurable
Protection against penetration of Pulse width 200/100(default)/60ms
IP51(indoor)
dust and water Pulse output 2 400imp/kWh
Insulating encased meter of
II
protective class
Electrostatic discharges 8kV contact / 15kV air gap
Electromagnetic HF fields IEC 61000-4-3
Electrical fast transients 4kV
12 21 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8
24 23 22 21 20 19
65m m
49m m
1 2 3 4 5 6 7
35
m
10 m
0m
m
mm L1
125
L2
LOAD
L3
LN
9
®
Specification Multi-tariff
Nominal voltage(Un) 3x230/400VAC time clock accuracy ﹤1s/day
Operational voltage 80%~120% of Un Tariff 4
Insulation capabilities Time segments 10
- AC voltage withstand 4kV for 1 minute Accuracy
- Impulse voltage withstand 6kV-1.2μS Voltage,Current 0.5%
Basic current (Ib) 5A Frequency 0.2% of mid-frequency
Operational current range 0.4% Ib-Imax Power factor 1% of unity (0.01)
Over current withstand 20 Imax for 0.01s Active power , Apparent power ±1% of range maximum
Operational frequency range 50/60Hz Reactive power ±1% of range maximum
Power consumption per phase ≤ 2W/10VA Reactive energy(Varh) Class 2
Display LCD Active energy (Wh) Class 1
Max reading 99999999 kWh/kVarh Modbus
Performance criteria Bus type RS485(semi-duplex)
Operating humidity ≤ 90% Protocol Modbus RTU
Storage humidity ≤ 95% Baud rate 1200/2400/4800/9600bps
Operating temperature -25°C - +55°C Address range 1-247
Storage temperature -40°C - +70°C Max. Bus loading 64pcs
Reference temperature 23°C± 2°C Communication distance 1000M
International standard IEC 62053-21 / EN50470-3 Parity EVEN/ODD/NONE
Accuracy class Class 1 Data bit 8
Installation category CAT III Stop bit 1
Mechanical environment M1 Pulse Output
Electromagnetic environment E2 Pulse outputs 2
Degree of pollution 2 Pulse output type Passive
Protection against penetration of Pulse Output 1 Configurable
IP51(indoor)
dust and water Pulse width 200/100(default)/60ms
Insulating encased meter of Pulse output 2 1000imp/kWh
II
protective class
Electrostatic discharges 8kV contact / 15kV air gap
Electromagnetic HF fields IEC 61000-4-3
Electrical fast transients 4kV
L1 L2 L3 N
B A GND
2 1
24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8
65 mm
49m m
24 23 22 21 20 19
35
m
10 m
0m 1 2 3 4 5 6 7
m
mm
1 25
L1
S1
P1
L2 S1
P1 LOAD
L3
S1
P1
10
®
11
12