Professional Documents
Culture Documents
2096198-016 RevD CASE CSOFT V7.0 XML
2096198-016 RevD CASE CSOFT V7.0 XML
2096198-016 RevD CASE CSOFT V7.0 XML
CASE™/CardioSoft™
Version 7.0
2096198-016 Revision D
NOTE: The information in this manual only applies to program version 7.0. It does not apply to
earlier versions of the program. Due to continuing product innovation, specifications in this manual
are subject to change without notice.
CASE, MAC, MARS, and MUSE are trademarks owned by GE Medical Systems Information
Technologies GmbH, a General Electric Company going to market as GE Healthcare.
1 INTRODUCTION................................................................................................................................... 1-1
MANUAL INFORMATION ......................................................................................................................................... 1-3
Revision History ............................................................................................................................................ 1-3
Manual Purpose ........................................................................................................................................... 1-3
Intended Audience ....................................................................................................................................... 1-3
RACE INFORMATION .............................................................................................................................................. 1-3
2 XML VALIDATOR PATCH INSTALLATION AND TROUBLESHOOTING ....................................................... 2-1
INTRODUCTION ..................................................................................................................................................... 2-3
INSTALLATION ...................................................................................................................................................... 2-3
PROBLEM DESCRIPTION .......................................................................................................................................... 2-3
Pre-condition: ............................................................................................................................................................ 2-3
Steps: ......................................................................................................................................................................... 2-3
Problem:..................................................................................................................................................................... 2-3
SCENARIO WHEN CUSTOMER RE-IMAGES THE CASE/CARDIOSOFT/CS SYSTEM ................................................................ 2-3
TROUBLESHOOTING: .............................................................................................................................................. 2-3
Problem: Windows Services Stopped Abruptly ................................................................................................... 2-3
Resolution: ................................................................................................................................................................. 2-3
3 XML DATA EXPORT ............................................................................................................................. 3-1
INTRODUCTION ..................................................................................................................................................... 2-3
Operator Interaction .................................................................................................................................... 3-3
Structure....................................................................................................................................................... 3-3
Details .......................................................................................................................................................... 3-3
Exercise Test XML Tags ................................................................................................................................ 3-4
Cardiology XML ............................................................................................................................................ 3-6
Observation Type ....................................................................................................................................................... 3-6
Observation Date/Time .............................................................................................................................................. 3-6
Observation End Date/Time ....................................................................................................................................... 3-6
Clinical Information .................................................................................................................................................... 3-7
Reason for Study .................................................................................................................................................... 3-7
Technician .............................................................................................................................................................. 3-7
Test Type ............................................................................................................................................................... 3-7
Observation Comment .......................................................................................................................................... 3-8
Device Information ................................................................................................................................................ 3-8
Patient Visit ................................................................................................................................................................ 3-8
Patient Class .......................................................................................................................................................... 3-8
Assigned Patient Location ...................................................................................................................................... 3-8
Patient Room ......................................................................................................................................................... 3-9
Admission Type ...................................................................................................................................................... 3-9
Attending Doctor ................................................................................................................................................... 3-9
Referring Doctor .................................................................................................................................................... 3-9
Servicing Facility .................................................................................................................................................... 3-9
Order Number ..................................................................................................................................................... 3-10
Extra Questions.................................................................................................................................................... 3-10
Patient Information .................................................................................................................................................. 3-10
Patient ID ............................................................................................................................................................. 3-10
Name ................................................................................................................................................................... 3-10
Age ....................................................................................................................................................................... 3-10
Birth Date/Time ................................................................................................................................................... 3-11
Gender ................................................................................................................................................................. 3-11
Race ..................................................................................................................................................................... 3-11
Height .................................................................................................................................................................. 3-12
Weight ................................................................................................................................................................. 3-12
1 Introduction
Manual Information
Revision History
Each page of the document has the document part number and a revision
letter at the bottom of the page.
The revision letter identifies the document’s update level.
Manual Purpose
This manual contains the reference information pertaining to export XML
data from the CASE/CardioSoft Version 7.0 system.
Intended Audience
The CASE/CardioSoft Version 7.0 system is intended to be used by trained
operators under the direct supervision of a licensed healthcare practitioner in
a hospital or clinic environment. Patient population includes both adult and
pediatric patients.
Race Information
The CASE/CardioSoft Version 7.0 system contains several fields which
must be filled in before acquisition of the ECG. Others are optional. You can
assess whether they are needed to perform the examination. The field titled
“Race” is one of the optional fields.
Introduction
The GE XMLValidator patch needs to be installed for all CASE/CardioSoft/CS
systems which have EXPD (XML export) and EPDF (PDF export) option codes
enabled. This chapter explains the troubleshooting steps if the windows service which
is installed as part of the GE XMLValidator patch, stops abruptly causing
reappearance of the original problem.
This chapter also covers the scenario when a customer re-images the operating system
of the CASE/CardioSoft/CS system.
Installation
For detailed information about the installation process, refer to “GE XML Validator
for CASE, CardioSoft, and CS Installation Guide” available in the ISO file (P/N-
5874419).
Problem Description
Pre-condition:
The “Export after each examination” for “PDF/Attached documents” and “XML” is
enabled in System Configuration > Export settings and “Export folder” is configured.
Steps:
An automatic export of a test is performed. Then a manual export of another test
(same or different patient) is performed.
Problem:
The PDF file name present in <Export> tag in the manually exported XML file
contains the name of the PDF file of the previously automatically exported PDF file.
After installation, verify in the control panel that the service is successfully installed.
In the service screen, verify that the service GE XMLValidator is running.
Troubleshooting:
Problem: Windows Services Stopped Abruptly
The Windows service which is installed as part of the GE XMLValidator patch, stopped
abruptly causing reappearance of the original problem.
The service status can be viewed in the services.msc screen. If the service is stopped,
the GE XMLValidator service status is displayed as “Stopped”.
Resolution:
When any unexpected service stop occurs, the recovery mechanism of the service is
set to “Restart the Service” in the XMLValidator Properties window. See the
screenshot below.
Introduction
This chapter describes the implementation details of the XML data export feature of
CASE/CardioSoft Version 7.0 systems. The output data format is also defined.
Operator Interaction
The following section details those aspects of the XML export interface which allow
some degree of control by the operator.
The operator is able to select the location and name of the output file.
The default location to save the file is the application default working directory.
Structure
The following chapters are arranged in order of the modalities in the form
• Exercise Test XML Tags
• Resting ECG XML Tags
• Ambulatory Blood Pressure Measurement XML Tags
• Spirometry XML Tags
• External Program XML Tags
The granularity of each modality is shown in the contents list at the beginning of this
document.
The listed tags are logically grouped in tables.
The elementary form of a single piece of information is called a field and is
represented by one tag.
A section determines a group of interrelated information, also starting with a tag.
Sections can be nested.
Details
The syntactial form of a tag is <Tag> ... </Tag>, where Tag is the identifier of the
column Tag, and ... represents the value.
If limits exist for the values the range is given in column Range.
An attribute can be added to a tag in the form of <Tag Attribute= > ... </Tag>, which
is listed in the corresponding column Attribute.
The column Required specifies whether the corresponding tag must exist in the data
record (= Yes), or whether it depends on the settings context (= No).
Tags with multiple occurrences (section and/or field) in the same context and on the
same hierarchical information level are marked as Multiple in the column Instance,
otherwise as Single.
The tag CardiologyXML precedes and follows any examination data record.
Notes
The XML interface permits the use of dates beyond 2038. The application, however,
uses third-party resources which do not correctly handle dates beyond 2038.
Cardiology XML
Observation Type
Observation Date/Time
Day This field contains the day of the month the test was ended. None [1..31] Yes Single
Month This field contains the month the test was ended. None [1..12] Yes Single
Year This field contains the year the test was ended. None [≤2038] 1) Yes Single
Clinical Information
Technician
Test Type
Observation Comment
Device Information
Patient Visit
Patient Class
Patient Room
Admission Type
Attending Doctor
Referring Doctor
Servicing Facility
Order Number
Extra Questions
Patient Information
Patient ID
Name
Age
Birth Date/Time
Gender
Race
For more
information,see
Race Information
Height
Weight
Pacemaker
Alternate Patient ID
Order
Request Number
Order Number
Schedule Time
Ordering Provider
Medical History
Medications
Drug
Exercise Measurements
ST Criteria
Maximum Workload
Target Load
ST/HR Slope
HR Reserve Used
HR Recovery
FreqVE Recovery
STHR Hysteresis
Resting Statistics
RestPE This field contains the baseline Perceived Exertion (PE) entry. Not that a resting PE value is None --- No Single
extremely useful, but it is included in case something later finds it.
RestRespRate This field contains the baseline respiratory rate measurement. None --- No Single
RestSPO2 This field contains the baseline SPO2 measurement. None No Single
RestST This section contains the baseline ST measurement for all of the available leads. None --- No Single
Measurements This section contains the baseline ST measurement for the specified lead. lead=[any valid lead --- Yes Multiple
label]
STAmplitude This field contains the baseline ST amplitude for the lead. units=[mm, mV] --- No Single
STSlope This field contains the baseline ST slope for the lead. units=[mV/s] --- No Single
Statistics at Max ST
MaxSTAmplitude This field contains the ST amplitude measurement for the specified lead at maximum ST. lead=[any valid lead --- No Single
label]
units=[mm, mV]
MaxSTTime This section contains the time at which maximum ST was found, None --- No Single
Minute This field contains the minute at which maximum ST was found. None --- No Single
Second This field contains the second at which maximum ST was found. None [0..59] No Single
MaxSTHR This field contains the heart rate of the patient at maximum ST. None --- No Single
MaxSTSystolicBP This field contains the systolic BP measurement at maximum ST. None --- No Single
MaxSTDiastolicBP This field contains the diastolic BP measurement at maximum ST. None --- No Single
MaxSTRPP This field contains the Rate Pressure Product (RPP) calculation at maximum ST. None --- No Single
MaxSTMets This field contains the Mets calculation at maximum ST. None --- No Single
MaxSTCardiacOutput This field contains the cardiac output measurement at maximum ST in [L/min]. None --- No Single
MaxSTVES This field contains the Ventricular Ectopy (VE) count at maximum ST. None --- No Single
MaxSTVO2 This field contains the O2 Uptake measurement at maximum ST in [L/min]. None --- No Single
MaxSTVCO2 This field contains the Venous CO2 measurement at maximum ST in [L/min]. None --- No Single
MaxSTETCO2 This field contains the End Tidal CO2 measurement at maximum ST in [L/min]. None --- No Single
MaxSTTidalVolume This field contains the tidal volume measurement at maximum ST in [L/min]. None --- No Single
MaxSTPE This field contains the Perceived Exertion (PE) entry at maximum ST. None --- No Single
MaxSTRespRate This field contains the respiration rate measurement at maximum ST. None --- No Single
MaxSTSPO2 This field contains the SPO2 measurement at maximum ST. None --- No Single
MaxST This section contains the ST measurements for all of the available leads at maximum ST. None --- No Single
Measurements This section contains the ST measurements for the specified lead at maximum ST. lead=[any valid lead --- Yes Multiple
label]
STAmplitude This field contains the ST amplitude for the lead at maximum ST. units=[mm, mV] --- No Single
STSlope This field contains the ST slope for the lead at maximum ST. units=[mV/s] --- No Single
ST/HR Index
PWC130
PWC150
PWC170
Arrhythmia Counts
Interpretation
Functional Capacity
Conclusion
Confirmed
Angina Index
Net ST Deviation
Average Mortality
Risk Factors
Smoker
Diabetes
Protocol
Device
Phase
Trends
Trend Entry
MeanArterialBP This field contains the mean arterial BP value at the time of the trend entry. None [0…300] No Single
PhaseTime This section contains the time within the phase of the trend entry. None --- No Single
Minute This field contains the minute within the phase of the trend entry. None --- Yes Single
Second This field contains the second within the phase of the trend entry. None [0..59] Yes Single
PhaseName This field contains the name of the phase trend entry is taken. None --- No Single
StageTime This section contains the time within the stage of the trend entry. None --- No Single
Minute This field contains the minute within the stage of the trend entry. None --- Yes Single
Second This field contains the second within the stage of the trend entry. None [0..59] Yes Single
StageNumber This field contains the number of the stage in which the trend entry is taken. None --- No Single
StageName This field contains the name of the stage in which the trend entry is taken. None --- No Single
Symptom This field contains any symptom comment entered at the time of the trend entry. None --- No Multiple
Changes This field contains the changes comment entered at the time of the trend entry. None --- No Multiple
TwaData Summary tag for the following TWA entries None --- No Single
TwaValid This field contains valid flag for TWA measurement None --- Yes Single
TwaMeasure This section contains TWA measurements leads=[any valid lead --- Yes Multiple
ments label]
TWAValue TWA value units=[uV] --- Yes Single
TWANoise TWA bouse units=[uV] --- Yes Single
Medians
Sample Rate
Resolution
Median
Median This section contains information for a median entry. Idx=[0,..] --- No Multiple
Time This section contains time within the test of the median entry. None --- No Single
Minute This field contains the minute within the test of the median entry. None --- Yes Single
Second This field contains the second within the test of the median entry. None [0..59] Yes Single
I-Point This field contains the I-Point position of the median entry. None --- Yes Single
J-Point This field contains the J-Point position of the median entry. None --- Yes Single
JX-Point This field contains the J+X -Point position of the median entry. None --- Yes Single
P-Point This field contains P onset point of the median entry. None --- Yes Single
PE-Point This field contains the P offset point position of the median entry. None --- Yes Single
Q-Point This field contains the QRS onset point of the median entry. None --- Yes Single
T-Point This field contains the T offset point of the median entry. None --- Yes Single
UserI-Point This field contains the user defined I-Point of the median entry. None --- No Single
UserJ-Point This field contains the user defined J-Point of the median entry. None --- No Single
UserJX-Point This field contains the user defined J+X-Point of the median entry. None --- No Single
WaveformData This field contains the waveform data starting with the first valid sample. lead=[any valid lead --- No Multiple
label]
startIdx=[Index of first
valid sample]
TWA Cycles
Sample Rate
Resolution
TWA Cycle
Time This section contains time for the TWA cycle within the test None --- No Single
Minute This field contains the minute for the TWA cycle within the test None --- Yes Single
Second This field contains the second for the TWA cycle within the test None [0..59] Yes Single
P-Point This field contains the P onset point for the TWA cycle None --- No Single
PE-Point This field contains the PE offset point position for the TWA cycle None --- No Single
I-Point This field contains the I-Point position for the TWA cycle None --- No Single
Q-Point This field contains the QRS onset point for the TWA cycle None --- No Single
T-Point This field contains the T offset point for the TWA cycle None --- No Single
J-Point This field contains the J-Point position for the TWA cycle None --- No Single
TwaPosition This field contains the maximum difference in the TWA cycle (even and odd median) lead=[any valid lead --- No Multiple
label]
WaveformDataCom This field contains the waveform data for complex 1 lead=[any valid lead --- No Multiple
plex1 label]
startIdx=[Index of first
valid sample]
WaveformDataCom This field contains the waveform data for complex 2 lead=[any valid lead --- No Multiple
plex2 label]
startIdx=[Index of first
valid sample]
Sample Rate
Resolution
Strip
Time This section contains time within the test of the ECG strip. None --- No Single
Minute This field contains the minute within the test of the ECG strip. None --- Yes Single
Second This field contains the second within the test of the ECG strip. None [0..59] Yes Single
WaveformData This field contains the waveform data of the ECG strip for the given lead. lead=[any valid lead --- No Multiple
label]
Arrhythmia Strips
Sample Rate
Resolution
Strip
Full Disclosure
Start Time
Number of Channels
Sample Rate
Resolution
Lead Order
Event List
FilterSetting This field contains the filter setting at the time of the event. units=[Hz] [0, 20, 40, 100, No Single
150, ???]
AdsFrf This field contains whether the ADS/FRF filter is on or off. None [On, Off,Unknown] No Single
ECG12SL
12SL Date/Time
Diagnosis Version
Diagnosis Text
Waveform Data
Measurements
P-Onset
P-Offset
QRS-Onset
QRS-Offset
T-Offset
PQ Duration
P Duration
QRS Width
QT Interval
Frontal QRS
Frontal P-Wave
Frontal T-Wave
Alternate QT Interval
JxJs Distance
Heart Rate
QT Dispersion
Acronyms
Median
QRSOnset This field contains the QRS onset for the average beat. None --- No Single
QRSOffset This field contains the QRS offset for the average beat. None --- No Single
TOffset This field contains the T-Wave offset for the average beat. None --- No Single
WaveformData This field contains all the waveform data for the average beat for the given lead. lead=[any valid lead --- No Multiple
label]
offset=[Offset for
average beat]
Export
File Name
CS Web
Unique Identifiers
Cardiology XML
Observation Type
Observation Date/Time
Day This field contains the day of the month the test was ended. None [1..31] Yes Single
Month This field contains the month the test was ended. None [1..12] Yes Single
Year This field contains the year the test was ended. None [≤2038] 1) Yes Single
Clinical Information
Technician
Device Information
Patient Visit
Patient Class
Patient Room
Admission Type
Attending Doctor
Referring Doctor
Servicing Facility
Order Number
Extra Questions
Patient Information
Patient ID
Name
Age
Birth Date/Time
Gender
Race
PACISLANDER,
MONGOLIAN,
INDIAN,
UNKNOWN]
For more
information,see
Race Information
Height
Weight
Pacemaker
Alternate Patient ID
Order
Request Number
Order Number
Schedule Time
Ordering Provider
Medical History
Medications
Drug
Exercise Measurements
NOTE: All tags of the Exercise Measurements are equivalent to those of Exercise Test. See tag definitions in previous chapter Exercise Test XML
Tags.
Ergospirometry Measurements
NOTE: The occurrence of the following ESPI parameters depends on the configuration in the ergospirometry program.
ESPI VO2
ESPI VCO2
ESPI VE
ESPI HF
ESPI AF
ESPI Last
ESPI VO2/kg
ESPI VCO2/kg
ESPI VE/kg
ESPI O2 Puls
ESPI VT
ESPI Zeit
ESPI_ Zeit-Unit This field contains the unit of parameter time Zeit. None --- No Single
ESPI_ Zeit-RefValue This field contains the reference value of parameter time Zeit. None --- No Single
ESPI Load/kg
ESPI BDsys
ESPI BDdia
Export
File Name
CS Web
Unique Identifiers
Cardiology XML
Observation Type
Observation Date/Time
Unique Identifiers
Clinical Information
Technician
Observation Comment
Device Information
Patient Visit
Patient Class
Patient Room
Admission Type
Ordering Provider
Attending Doctor
Referring Doctor
Servicing Facility
Systolic Bloodpressure
Diastolic Bloodpressure
Chest Pain
Medical History
Order Number
Medications
Extra Questions
Patient Information
Patient ID
Name
Age
Birth Date/Time
Gender
Race
For more
information,see
Race Information
Height
Weight
Pacemaker
Filter Setting
ADS
Filter 50 Hz
Filter 60 Hz
Low Pass
Tag Description
LowPass This field describes which low pass filter was used
High Pass
Device-Type
Interpretation
ACI-TIPI
Diagnosis
Conclusion
Confirmed
Diagnosis Version
Ventricular Rate
PQ Interval
P Duration
QRS Duration
QT Interval
QTC Interval
RR Interval
PP Interval
P Axis
R Axis
T Axis
QT Dispersion
Number of QRS
Measurement Table
TAmplitude T-amplitude, of all leads separated by comma units=[uV] AMPLITUDE* Yes Single
JXSlope Slope at point J+x, of all leads separated by comma units=[uV/s] AMPLITUDE* Yes Single
POnset P-Onset, of all leads separated by comma (HEART) units=[ms] DURATION_NEG* No Single
POffset P-Offset, of all leads separated by comma (HEART) units=[ms] DURATION_NEG* No Single
QOnset Q-Onset, of all leads separated by comma (HEART) units=[ms] DURATION_NEG* No Single
QOffset Q-Offset, of all leads separated by comma (HEART) units=[ms] DURATION_NEG* No Single
TOffset T-Offset, of all leads separated by comma (HEART) units=[ms] DURATION_NEG* No Single
R1Duration R’-Duration, of all leads separated by comma (12SL) units=[ms] DURATION_NEG* No Single
P1Amplitude P’-Amplitude, of all leads separated by comma (12SL) units=[uV] AMPLITUDE* No Single
JXEAmplitude STE-Amplitude, of all leads separated by comma (12SL) units=[uV] AMPLITUDE* No Single
T1Amplitude T’-Amplitude, of all leads separated by comma (12SL) units=[uV] AMPLITUDE* No Single
P Onset
P Offset
Q Onset
Q Offset
T Offset
Median Samples
Vector Loops
Resolution
P Onset
P Offset
Q Onset
Q Offset
T Offset
Frontal
Horizontal
Sagittal
Strip Data
Number of Leads
Sample Rate
Resolution
Waveform Data
Arrhythmia Results
Full Disclosure
Number of Channels
Sample Rate
Resolution
Lead Order
Event List
Arrhythmia Results
Export
File Name
CS Web
a
Tag Description Attributes Range Required Instance
a This field contains the URL. href=<string> --- Yes Single
Example:
href=”http:// IP Address
/scripts/CardioSoftWeb/iscard.dll?GetExamination?PatNumber=56&RecTyp=14&Re
cComp=0&RecNumber=767”
Cardiology XML
Observation Type
Observation Date/Time
Unique Identifiers
Clinical Information
Technician
Observation Comment
Device Information
Patient Visit
Patient Class
Patient Room
Admission Type
Ordering Provider
Attending Doctor
Referring Doctor
Servicing Facility
Systolic Bloodpressure
Diastolic Bloodpressure
Chest Pain
Medical History
Order Number
Medications
Extra Questions
Patient Information
Patient ID
Name
Age
Birth Date/Time
Gender
Race
For more
information,see
Race Information
Height
Weight
Pacemaker
Device-Type
Interpretation
Conclusion
Confirmed
ABP General
Oscillatory Measurement
Start Time
End Time
MinimumVal This field contains the minimum systolic blood pressure value of the appropriate statistic None --- Yes Single
phase.
MinimumTimeStamp This section contains the time stamp for the minimum systolic blood pressure value of the None --- Yes Single
appropriate statistic phase.
Hour This field contains the hour of the minimum systolic blood pressure value of the appropriate None [0..23] Yes Single
statistic phase.
Minute This field contains the minute of the minimum systolic blood pressure value of the None [0..59] Yes Single
appropriate statistic phase.
Day This field contains the day of the minimum systolic systolic blood pressure value of the None [1, 2] Yes Single
appropriate statistic phase.
MaximumVal This field contains the maximum systolic blood pressure value of the appropriate statistic None --- Yes Single
phase
MaximumTimeStamp This section contains the time stamp for the maximum systolic blood pressure value of the None --- Yes Single
appropriate statistic phase.
Hour This field contains the hour of the maximum systolic blood pressure value of the appropriate None [0..23] Yes Single
statistic phase.
Minute This field contains the minute of the maximum systolic blood pressure value of the None [0..59] Yes Single
appropriate statistic phase.
Day This field contains the day of the maximum systolic blood pressure value of the appropriate None [1, 2] Yes Single
statistic phase.
AveragedVal This field contains the averaged systolic blood pressure value of the appropriate statistic None Format xxx.x Yes Single
phase.
StdDeviation This field contains the standard deviation for the systolic blood pressure values of the None Format xxx.x Yes Single
appropriate statistic phase.
Histogram
Start Hour
Heart Rate
Systolic Values
Diastolic Values
Mean Values
Number
Measurement Period
period.
Hour This field contains the hours of all blood pressure readings of this measurement period. None [0..23] Yes Single
Minute This field contains the minutes of all blood pressure readings of this measurement period. None [0..59] Yes Single
Second This field contains the seconds of all blood pressure readings of this measurement period. None [0..59] Yes Single
HeartRate This field contains the pulse rates of all blood pressure readings of this measurement period units=[1/min] --- Yes Single
SystolicValue This field contains the systolic values of all blood pressure readings of this measurement units=[mmHg] --- Yes Single
period.
DiastolicValue This field contains the diastolic values of all blood pressure readings of this measurement units=[mmHg] --- Yes Single
period.
MeanValue This field contains the mean values of all blood pressure readings of this measurement period. units=[mmHg] --- Yes Single
PulsePressure This field contains the pulse pressure values of all blood pressure readings of this units=[mmHg] --- Yes Single
measurement period.
MeasInvalByUser This field contains the validity (set by the user) of all blood pressure readings of this None 1: invalidated by Yes Single
measurement period. the user
MeasPhaseNight This field contains the phase information of all blood pressure readings of this measurement None 1:night phase Yes Single
period.
MeasManual This field contains the type of start of all blood pressure readings of this measurement period. None 1: measurement Yes Single
manually started
Export
File Name
CS Web
a
Tag Description Attributes Range Required Instance
a This field contains the URL. href=<string> --- Yes Single
Example:
href=”http:// IP Address
/scripts/CardioSoftWeb/iscard.dll?GetExamination?PatNumber=56&RecTyp=14&Re
cComp=0&RecNumber=767”
Cardiology XML
Observation Type
Observation Date/Time
Unique Identifiers
Clinical Information
Technician
Observation Comment
Device Information
Patient Visit
Patient Class
Patient Room
Admission Type
Ordering Provider
Attending Doctor
Referring Doctor
Servicing Facility
Systolic Bloodpressure
Diastolic Bloodpressure
Chest Pain
Medical History
Order Number
Medications
Extra Questions
Patient Information
Patient ID
Name
Age
Birth Date/Time
Gender
Race
For more
information,see
Race Information
Height
Weight
Pacemaker
Interpretation
Diagnosis
Conclusion
Confirmed
SPI General
Sensor Type
Firmware Version
Reference Equation
Measurement Mode
PT Code Data
Ambient Conditions
Interpretation Model
ATS Summary
Parameter IDs
Parameter Units
Predicted Parameters
Flow Resolution
Volume Resolution
SPI Measurements
Parameter Values
Waveforms
Export
File Name
CS Web
Cardiology XML
Observation Type
Observation Date/Time
Unique Identifiers
Clinical Information
Technician
Observation Comment
Device Information
Patient Visit
Patient Class
Patient Room
Admission Type
Ordering Provider
Attending Doctor
Referring Doctor
Servicing Facility
Systolic Bloodpressure
Diastolic Bloodpressure
Chest Pain
Medical History
Order Number
Medications
Extra Questions
Patient Information
Patient ID
Name
Age
Birth Date/Time
Gender
Race
For more
information,see
Race Information
Height
Weight
Pacemaker
ExternProgData
EXT_SHORTREP
EXT_APPNAME
EXT_APPVERS
EXT_EZ1SERN
EXT_EZ1RECN
EXT_TESTTYPN
EXT_TESTTYPT
EXT_TESTDATE
EXT_TESTTIME
EXT_REVDATE
EXT_REVBY
EXT_REVMEM
EXT_XQ1
EXT_XA1
EXT_XQ2
EXT_XA2
EXT_PREDREF
EXT_INTPREF
EXT_INTPRET
ParamName This field contains the name of this parameter. None --- No Single
ParamValue This field contains the value of this parameter. None --- No Single
EXT_PDFPATH
EXT_FEV1
EXT_FEV1p
EXT_FVC
EXT_FVCp
EXT_FEV1VC
EXT_FEV1VCp
EXT_FEV1FVC
EXT_FEV1FVCp
EXT_FEV6
EXT_FEV6p
EXT_FEV1FEV6
EXT_FEV1FEV6p
EXT_FEF25
EXT_FEF25p
EXT_FEF50
EXT_FEF50p
EXT_FEF75
EXT_FEF75p
EXT_FEF2575
EXT_FEF2575p
EXT_PEF
EXT_PEFp
EXT_FET
EXT_FETp
EXT_FIVC
EXT_FIVCp
EXT_PIF
EXT_PIFp
EXT_VC
EXT_VCp
EXT_VCex
EXT_VCexp
EXT_VCin
EXT_VCinp
EXT_VT
EXT_VTp
EXT_IRV
EXT_IRVp
EXT_ERV
EXT_ERVp
EXT_IC
EXT_ICp
EXT_Rf
EXT_Rfp
EXT_MVV
EXT_MVVp
Confirmed
Export
File Name
CS Web
a
Tag Description Attributes Range Required Instance
a This field contains the URL. href=<string> --- Yes Single
Example:
href=”http://IP
address/scripts/CardioSoftWeb/iscard.dll?GetExamination?PatNumber=56&RecTyp=14&
amp;RecComp=0&RecNumber=767”
www.gehealthcare.com