Professional Documents
Culture Documents
LODETTI-PAVITOP 100 - Tds - v3.2 - en
LODETTI-PAVITOP 100 - Tds - v3.2 - en
PAVITOP 100 - 1 | 3 -
PAVITOP 100
Solid content 41% PAVITOP 100 is cold-applied and does not require
specialized hot spray equipment. PAVITOP 100 is
PH ~12.2 ready-to-use material, it should be mixed thoroughly
before application.
Water absorption
(concrete surface, 24 hours, at 23ºC, R.H. 2 mm
50% ) Use a low-pressure sprayer and continuously apply an
even coat on all the horizontal surfaces. Spread evenly
Reduction rate of water with roller or trowel to make sure PAVITOP 100
absorption (concrete surface, 24 93% penetrates into the concrete as much as possible and
hours, at 23ºC, R.H. 50% )
allow 30-90 minutes for penetration. Areas that are
Abrasion resistance prematurely dry should be supplemented with PAVITOP
296%
(ball bearing method) 100 in time.
Non-combustible
Reaction to fire Check carefully after 1~2 hours of application. If there is
materials
still residual PAVITOP 100 in the lower place, it should be
5ºC - 35ºC pushed to the dried area or completely removed from the
Application temperature R.H. < 85% surface.
Penetration time (at 24ºC, R.H. 50%) 30-90 min.
To achieve the marble gloss effect, polish the surface
Cleaning (at 24ºC, R.H. 50%) after 4 hours using resin grinding disc (300-1000 mesh) after 3-5 days
of application.
Polishing (at 24ºC, R.H. 50%) after 3-5 days
CONSUMPTION
APPLICATION PROCEDURE
0.15-0.40 kg / m2
Preparation of the substrate The consumption rates mentioned above are theoretical values only.
PAVITOP 100 - 2 | 3 -
PAVITOP 100
PAVITOP 100 - 3 | 3 -