Professional Documents
Culture Documents
Cs Tcom RF 1944 Series Broadband Inverted Vee HF Antenna Spec Sheet
Cs Tcom RF 1944 Series Broadband Inverted Vee HF Antenna Spec Sheet
Cs Tcom RF 1944 Series Broadband Inverted Vee HF Antenna Spec Sheet
MECHANICAL
RF Connector BNC, male
RF Coaxial Cable RG-58 (10 meters)
Set Up Time 10 minutes for 2 people
ENVIRONMENTAL
Operating -13°F to +131°F (-25°C to +55°C)
Temperature
Storage: -40°F to +158°F (-40°C to +70°C)
ELECTRICAL
Frequency Range 1.6 to 30 MHz The RF-1944 antenna series includes
RF Power Capacity 150 and 400 W lightweight, transportable broadband
Input Impedance 50 ohms (nominal) dipole antennas providing radiation
Radiation Pattern See plot on back page patterns ideal for HF skywave
Polarization Primarily horizontal communications from 0 to 1500
VSWR See plot below miles. Their rugged, yet simple
-16 dBi at 2 MHz
design allows quick installation
Gain
-2 dBi at 30 MHz into the primary Inverted Vee
configuration. Termination loads
PHYSICAL provide instantaneous bandwidth
performance over the entire 1.6
Stowed: (AT150) 13 H x 16 W x 3 D in (33 H x 40.6 W x 7.6 D cm)
Dimensions
Deployed: 164 ft (50 meters). to 30 MHz frequency range. The
antennas do not require an antenna
AT15: 9 lbs (4.1 kg)
Weight coupler, making them ideal for
AT400: 11 lbs (5 kg)
operations with frequency-agile
Color/Finish Black/OD finish
waveforms. The RF-1944 series
TYPICAL RF-1944 VSWR AND IMPEDENCE PLOTS operate at two different power
levels: the RF-1944-AT150 up to
150 Watts and the RF-1944-AT400
3.5 1
0.5 2
up to 400 Watts. Both antennas
3.0 include a balun, two dipole radiating
2.5 0.2 5 elements, two terminating loads,
2.0
two ground rods, two ground stakes,
O ∞
coaxial cable, weighted throwing line
1.5
-0.2 -5
and carrying bag.
1.0
0.0 5.0 10.0 15.0 20.0 25.0 30.0 -0.5 -2
FREQUENCY (MHz) -1
RF-1944 RADIATION PATTERNS
FOR 4, 8, 16 AND 24 MHZ
4 MHz
8 MHz
16 MHz
24 MHz