Professional Documents
Culture Documents
Dimensions of Spades (Paddle Blank) and Ring Spacers (Paddle Spacer) ASME B16.48 For Installation Between ASME B16.5 Flanges
Dimensions of Spades (Paddle Blank) and Ring Spacers (Paddle Spacer) ASME B16.48 For Installation Between ASME B16.5 Flanges
Dimensions of Spades (Paddle Blank) and Ring Spacers (Paddle Spacer) ASME B16.48 For Installation Between ASME B16.5 Flanges
ange guide
1/2 45 16 126 3 32
3/4 54 21 131 3 32
1 64 27 136 3 32
1¼ 73 42 145 6.4 32
1½ 83 48 145 6.4 32
2½
EXPLORE
3½ the WORLD
159 of PIPING102 202 9.7 38
Center
Outside Inside Thick Handle
to
NPS Dia Dia ness Width
End
A B t W
C
1 70 27 139 6.4 32
1¼ 79 42 150 6.4 32
1½ 92 48 150 6.4 32
Center
Outside Inside Thick Handle
to
NPS Dia Dia ness Width
End
A B t W
C
SUBMENU FLANGES PP
www.wermac.org/flanges/dimensions_spades_ring-spacer_paddle-blind_paddle-spacer.html 3/10
7/19/2020 Dimensions of Spades (Paddle blank) and Ring Spacers (Paddle spacer) ASME B16.48 for installation between ASME B16.5 flanges
1 70 27 139 6.4 32
1¼ 79 37 150 9.7 32
1½ 92 43 150 9.7 32
14
EXPLORE
18 the WORLD
610 of PIPING448 459 53.8 51
Center
Outside Inside Thick Handle
to
NPS Dia Dia ness Width
End
A B t W
C
1 76 27 142 6.4 32
1¼ 86 37 151 9.7 32
1½ 95 43 151 9.7 32
2½ 162 67 186
SUBMENU FLANGES 12.7 32 PP
www.wermac.org/flanges/dimensions_spades_ring-spacer_paddle-blind_paddle-spacer.html 5/10
7/19/2020 Dimensions of Spades (Paddle blank) and Ring Spacers (Paddle spacer) ASME B16.48 for installation between ASME B16.5 flanges
Center
Outside Inside Thick Handle
to
NPS Dia Dia ness Width
End
A B t W
C
End
C
1 76 27 142 9.7 32
1¼ 86 35 151 9.7 32
1½ 95 41 151 12.7 32
Center
Outside Inside Thick Handle
to
NPS Dia Dia ness Width
End
A B t W
C
SUBMENU FLANGES PP
www.wermac.org/flanges/dimensions_spades_ring-spacer_paddle-blind_paddle-spacer.html 7/10
7/19/2020 Dimensions of Spades (Paddle blank) and Ring Spacers (Paddle spacer) ASME B16.48 for installation between ASME B16.5 flanges
1 83 27 145 9.7 32
A B End t W
C
General notes:
EXPLORE the WORLD of PIPING
Dimensions are in millimeters unless otherwise indicated.
Spade Handles shall be solid with NO openings.
Further notes:
Ring Spacer Handles shall have a single through indicator hole located near the end of the handle.
The hole diameter shall not be less than 12 mm.
Wt = Thickness of the handle should be 6 mm minimum, or equal to Thickness (t) if less than 6
mm.
Spades and Ring Spacers should be made from a plate or forging speci cation, approved for use
by ASME B31.3, of essentially the same chemical composition as the mating anges and piping
involved.
Spades and Ring Spacers ASME B16.48 may be used for installation between ASME B16.5 anges
Depending on a customer speci cation, some dimensions can be di erent from what on this page
is de ned.
For spades, which can be lift up by people that's no problem, but for a spade
that weighs hundreds of kilograms, a lifting ability is needed. So it is usual, that
from a certain weight and size, a hole at the top of the handle is made to give a
lifting possibly. Many companies have their own rules, about the
implementation of a spade handle, so there are many di erent types and
designs.
ASME B16.48 says: The gasket seating surface nish and dimensions for raised
face line blanks shall be in accordance with ASME B16.5. A raised face may be
speci ed at the option of the purchaser.
A Raised Face would add machining time and complexity so the price would be
higher. Call this the Bugatti or Rolls Royce of the line blind world.
SUBMENU FLANGES PP
www.wermac.org/flanges/dimensions_spades_ring-spacer_paddle-blind_paddle-spacer.html 9/10
7/19/2020 Dimensions of Spades (Paddle blank) and Ring Spacers (Paddle spacer) ASME B16.48 for installation between ASME B16.5 flanges
Personally, I have seen that version once or twice somewhere. The version
without Raised Face is the default and is used everywhere.
^
© Werner Sölken 2008 - 2020. All rights reserved.
The rumours of the demise of the U.S. manufacturing industry are greatly exaggerated. ELON MUSK
SUBMENU FLANGES PP
www.wermac.org/flanges/dimensions_spades_ring-spacer_paddle-blind_paddle-spacer.html 10/10