Professional Documents
Culture Documents
Analog Electronics Diploma
Analog Electronics Diploma
1.
To prevent a DC return between source and load, it is necessary to use
resistor between source and load
inductor between source and load
capacitor between source and load
either (a) or (b)
3.
Which of the following oscillators is suitable for frequencies in the range of mega
hertz?
RC phase shift
Wien bridge
Hartley
Both (a) and (c)
7.
In figure v1 = 8 V and v2 = 4 V. Which diode will conduct?
D2 only
D1 only
Both D1 and D2
Neither D1 nor D2
22.
The efficiency of a full wave rectifier using centre tapped transformer is twice that in
full wave bridge rectifier.
True
False
25.
Negative feedback reduces noise originating at the amplifier input.
True
False
34.
A forward voltage of 9 V is applied to a diode in series with a 1 kΩ load resistor. The
voltage across load resistor is zero. It indicates that
diode is short circuited
diode is open circuited
resistor is open circuited
diode is either short circuited or open circuited
ans b
2.
The terminals of a power BJT are called
emitter, base, collector
emitter, base, drain
source, base, drain
source, base, collector
ans a
3.
An OR gate has 4 inputs. One input is high and the other three are low. The output
is low
is high
is alternately high and low
may be high or low depending on relative magnitude of inputs
ans b